BioSmart Prox-E Manuale utente

BioSmart Prox-E

Installation Guide

www.biosmart-tech.com

1 Prox-E Installation Guide v1.2|10.2018|en

Contents

Safety Instructions.............................................................................................................................................2

1. Overview ....................................................................................................................................................3

Specifications......................................................................................................................................3

Part names and functions...................................................................................................................4

Package contents................................................................................................................................5

Opening the case................................................................................................................................5

Circuit board.......................................................................................................................................6

Circuit board LEDs and jumpers .........................................................................................................6

Connector names and description .....................................................................................................6

2. Installation .................................................................................................................................................8

Cable types .........................................................................................................................................8

General installation notes ..................................................................................................................8

Mounting on wall ...............................................................................................................................8

Mounting on DIN-rail..........................................................................................................................9

Power supply connection .................................................................................................................10

Network connection.........................................................................................................................10

BioSmart Readers connection ..........................................................................................................11

Fail-safe lock connection (with external power supply) ..................................................................12

Fail-safe lock connection (without external power supply).............................................................13

Fail-secure lock connection (with external power supply)...........................................................13

Fail-secure lock connection (without external power supply) .....................................................14

Exit buttons and door sensors connection...................................................................................15

Wiegand output connection.........................................................................................................16

Wiegand input connection ...........................................................................................................17

2 Prox-E Installation Guide v1.2|10.2018|en

Safety Instructions

Safety instructions must be followed in addition to International Standards (ISO/IEC)*, and other safety

regulations.

Caution

Caution indicates a hazard with a low level of risk which, if not avoided, could

result in minor or moderate injury.

Note

Note indicates an important remark, which should be taken into attention.

Caution

General requirements:

Read, follow and retain instructions –All safety and operating instructions

must be read and followed properly before putting the unit into operation.

Do not turn on the power supply until all installation procedures are

finished –this may lead to injury or equipment damage.

Do not disconnect or connect cables while unit is powered on –this may

lead to unit malfunction and software errors.

Do not expose unit to heat or fire –high temperature impact may lead to

case deformation and circuit board damage.

Make sure that all cables and screws are fastened properly - otherwise

case damage or circuit shortcut may happen.

Note

Additional requirements:

Use a clean, dry cloth to remove any dirt or dust from the unit.

*IEC 60204-1: Safety of machinery –Electrical equipment of machines. (Part 1: General requirements)

3 Prox-E Installation Guide v1.2|10.2018|en

Overview

The BioSmart Prox-E Controller is designed for use as part of the BioSmart biometric access

monitoring and control system. The controller provides a means to track working hours and

attendance by identifying users through the unique biometric characteristics of fingerprints and

RFID proximity cards. It can also be used for access monitoring and control.

Controller is designed to work with BioSmart BS-RD and BioSmart Mini readers.

Controller is compatible with BioSmart Studio software version V5.0.3.269 and above.

Specifications

Number of users*

30 000

Logged events

100 000

Number of time groups

Power supply

12V±15%, 0,4A

Power relay outputs (NC, С, NO outputs)

Power rating of power relays

12-24V, 7А

Readers

Up to 4

Readers interface

RS-485, Wiegand

Wiegand outputs

Discrete inputs

Network interface

Ethernet, (IEEE 802.3, 10BASE-T,

IEEE 802.3u, 100BASE-TX)

Operating temperature

0 to +50 °C

Case type

Laid-on plastic

Dimensions (H x W x D)

145 х 100 х 40 mm

Weight

Net:190 g; gross:275 g

Warranty

3 years

Note: * - Each user can be provided with single card code

4 Prox-E Installation Guide v1.2|10.2018|en

Part names and functions

Name

Description

“Alarm” LED

Alarm indication

“Work” LED

Work mode indication

Mounting screw

Fastens front cover

Mounting holes

Suited for fixing screws

Cable inputs

Detachable panels, suited for cable inputs

5 Prox-E Installation Guide v1.2|10.2018|en

Package contents

Item

Number, pcs

BioSmart Prox-E Controller

Mounting kit (four 6х35 dowels, four

3.5х38 self-tapping screws)

Opening the case

Remove the front cover retaining screw

Detach the cover from the rear panel to access the circuit board.

6 Prox-E Installation Guide v1.2|10.2018|en

Circuit board

Circuit board LEDs and jumpers

Name

Type

Description

VL2

LED

Indicates if Relay 1 is powered on

VL3

LED

Indicates if Relay 2 is powered on

LED

Indicates BS-RD or Biosmart Mini connection

LED

Indicates BS-RD or Biosmart Mini connection

Jumper

Transfer +12V voltage to C1 if closed

Jumper

Transfer +12V voltage to C2 if closed

IP RST

Jumper

IP settings reset

BOOT

Jumper

Boot mode

VL1

Opto-isolator

Controls case opening

Connector names and description

№

Name

Description

Used for

GND

Power supply -ground

Power supply

+12V

+12V Power supply

Power supply

NO1

Normally open relay 1 output

Fail-secure lock

Common relay 1 output

Fail-safe lock/ Fail-secure lock

NC1

Normally closed relay 1 output

Fail-safe lock

GND

Ground

Lock power supply commutation

NO2

Normally open relay 2 output

Fail-secure lock lock

Common relay 2 output

Fail-safe lock/ Fail-secure

NC2

Normally closed relay 2 output

Fail-safe lock

GND

Ground

Lock power supply commutation

7 Prox-E Installation Guide v1.2|10.2018|en

IN1

Discrete input 1

Enter/exit buttons, door sensors

IN1+

Discrete input «+»

Enter/exit buttons, door sensors

IN2

Discrete input 2

Enter/exit buttons, door sensors

IN2+

Discrete input «+»

Enter/exit buttons, door sensors

IN3

Discrete input 3

Enter/exit buttons, door sensors

IN4

Discrete input 4

Enter/exit buttons, door sensors

VC0

Reader power supply 12V

Reader power input

GND

Ground

Reader ground

WI00

Wiegand input 00

Reader, wiegand 00

WI01

Wiegand input 01

Reader, wiegand 01

SP0

Reader speaker input

Reader, speaker output

L_G0

Reader green indicator input

Reader, green indicator output

L_R0

Reader red indicator input

Reader, red indicator output

WI01

Wiegand input 01

Reader, wiegand 00

WI11

Wiegand input 11

Reader, wiegand 01

SP1

Reader speaker input

Reader, speaker output

L_G1

Reader green indicator input

Reader, green indicator output

L_R1

Reader red indicator input

Reader, red indicator output

VC1

Reader power supply 12V

Reader power input

GND

Ground

Reader ground

RD+

485+

BS-RD, Biosmart Mini 485+

RD-

485-

BS-RD, Biosmart Mini 485-

IN6+

Discrete input 6 «+»

Enter/exit buttons, door sensors

IN6

Discrete input 6

Enter/exit buttons, door sensors

IN5+

Discrete input 5«+»

Enter/exit buttons, door sensors

IN5

Discrete input 5

Enter/exit buttons, door sensors

W00

Wiegand output 00

External controller wiegand input 00

W01

Wiegand output 01

External controller wiegand input 01

+485

RS-485 interface «+»

BCR (Zflex) Relay control module 485 +

-485

RS-485 interface «-»

BCR (Zflex) Relay control module 485 -

8 Prox-E Installation Guide v1.2|10.2018|en

Installation

Cable types

№

Cable connection

Max. length

Type

Ethernet (IEEE 802.3)

100 m.

Four twisted pair cables of no lower than category five

with a wire size of no less than 0.2 mm2

Power source

50 m.

Duplex cable with a wire size of no less than 0.75 mm2(for

example, 3192Y)

Turnstile, lock

20 m.

Duplex cable with a wire size of no less than 0.75 mm2(for

example, 3192Y)

BioSmart Mini, BS-RD

500 m.

Four twisted pair cables of no lower than category five

with a wire size of no less than 0.2 mm2

Exit buttons, sensors

10 m.

CQR-6 or RAMCRO-6 cable

Wiegand interface

(input and output)

60 m.

Four twisted pair cables of no lower than category five

with a wire size of no less than 0.2 mm2

General installation notes

Install the controller on vertical surface;

Cables must be installed in accordance with the operational code for electrical

installations;

Do not lay cables within 30 cm of sources of electromagnetic interference;

All cables must only intersect power cables at a right angle;

All cable extensions must be soldered.

Carefully check for mechanical damage on the surface of the controller circuit board and

case;

In order to avoid short circuits, the protected ends of cables used to connect the controller

must not exceed 5 mm.

Mounting on wall

1. Decide where to install controller, using a mounting template.

2. Drill holes, according to a mounting template and insert dowels inside the holes.

3. Cut out cable input plates

9 Prox-E Installation Guide v1.2|10.2018|en

4. Place controller on wall and fix it with self-tapping screws.

5. Connect power supply, readers, locks, and buttons, if needed, according to p.2.5-2.11 . Put

cables through previously made holes.

6. Attach the covering and fix the retaining screw.

Mounting on DIN-rail

1. Place the lower clip on the edge of the rail.

2. Pull the upper clip (2) with a slot-head screwdriver.

3. Press the controller to the DIN rail (1), the upper clip must snap under the pressure of the

spring.

Indice

Altri manuali BioSmart Controllori

BioSmart

BioSmart UniPass Manuale utente

BioSmart

BioSmart UniPass Pro Manuale utente

Manuali Controllori popolari di altre marche

Digiplex

Digiplex DGP-848 Istruzioni operative

YASKAWA

YASKAWA SGM series Manuale utente

Sinope

Sinope Calypso RM3500ZB Manuale utente

Isimet

Isimet DLA Series Style 2 Manuale di installazione

LSIS

LSIS sv-ip5a Manuale utente

Rockwell Automation

Rockwell Automation 1769-L31 Manuale utente

Airflow

Airflow Uno hab Manuale utente

ABB

ABB ACS580-01 drives Manuale utente

Panasonic

Panasonic GM1 Series Manuale utente

Emerson

Emerson SW93 Manuale utente

AutoAqua

AutoAqua Smart ATO micro SATO-120P Manuale utente

Panasonic

Panasonic FP? Positioning Unit RTEX Manuale utente

Samson

Samson Type 5824 Manuale di servizio

Alpha IP

Alpha IP MIOB 21001 Manuale utente

Siemens

Siemens OpenAir GMA 1 Series Manuale utente

Surecom

Surecom SR-629 Manuale utente

Fishman

Fishman TriplePlay Manuale utente

Regulus

Regulus SRS1 T Manuale utente