Biostar BIMX-100 Manuale utente
FCC Informaon and Copyright
This equipment has been tested and found to comply with the limits of a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protecon
against harmful interference in a residenal installaon. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and used in accordance with the instrucons,
may cause harmful interference to radio communicaons. There is no guarantee that interference
will not occur in a parcular installaon.
The vendor makes no representaons or warranes with respect to the contents here and
specially disclaims any implied warranes of merchantability or tness for any purpose. Further
the vendor reserves the right to revise this publicaon and to make changes to the contents here
without obligaon to nofy any party beforehand.
Duplicaon of this publicaon, in part or in whole, is not allowed without rst obtaining the
vendor’s approval in wring.
The content of this user’s manual is subject to be changed without noce and we will not be
responsible for any mistakes found in this user’s manual. All the brand and product names are
trademarks of their respecve companies.
Dichiarazione di conformità sinteca
Ai sensi dell’art. 2 comma 3 del D.M. 275 del
30/10/2002
Si dichiara che questo prodoo è conforme
alle normave vigen e soddisfa i requisi
essenziali richies dalle direve
2004/108/CE, 2006/95/CE e 1999/05/CE
quando ad esso applicabili
Short Declaraon of conformity
We declare this product is complying with the
laws in force and meeng all the essenal
requirements as specied by the direcves
2004/108/CE, 2006/95/CE and 1999/05/CE
whenever these laws may be applied
2 | Table Of Contents
Table Of Contents
FCC Informaon and Copyright ������������������������������������������������������������������������������� 1
Chapter 1: Introducon������������������������������������������������������������������������������������������� 3
1.1 Before You Start.................................................................................................................. 3
1.2 Package Checklist................................................................................................................ 3
1.3 Specicaons...................................................................................................................... 4
Chapter 2: Hardware installaon����������������������������������������������������������������������������� 7
2.1 Central Processing Unit (CPU)............................................................................................. 7
2.2 Connect Cooling Fans ......................................................................................................... 7
2.3 Installing System Memory (1.35V only) .............................................................................. 7
2.4 Power Supply ...................................................................................................................... 8
2.5 Jumpers / Headers / Connectors ...................................................................................... 10
2.6 Expansion Slots ................................................................................................................. 15
Chapter 3: BIOS Setup������������������������������������������������������������������������������������������� 16
3.1 Main Menu ....................................................................................................................... 17
3.2 Advanced Menu................................................................................................................ 18
3.3 Chipset Menu.................................................................................................................... 32
3.4 Security Menu................................................................................................................... 38
3.5 Boot Menu........................................................................................................................ 40
3.6 Exit Menu.......................................................................................................................... 41
Chapter 4: Useful help������������������������������������������������������������������������������������������� 42
4.1 Driver Installaon ............................................................................................................. 42
4.2 AMI BIOS Beep Code......................................................................................................... 43
4.3 AMI BIOS post code .......................................................................................................... 43
4.4 Troubleshoong................................................................................................................ 45
Chapter 1: Introducon | 3
BIMX-100/BIMX-200 User’s Manual
Chapter 1: Introducon
1�1 Before You Start
Thank you for choosing our product. Before you start installing the motherboard, please make
sure you follow the instrucons below:
• Prepare a dry and stable working environment with sucient lighng.
• Always disconnect the computer from power outlet before operaon.
• Before you take the motherboard out from an-stac bag, ground yourself properly
by touching any safely grounded appliance, or use grounded wrist strap to remove the
stac charge.
• Avoid touching the components on motherboard or the rear side of the board unless
necessary. Hold the board on the edge, do not try to bend or ex the board.
• Do not leave any unfastened small parts inside the case aer installaon. Loose parts
will cause short circuits which may damage the equipment.
• Keep the computer from dangerous area, such as heat source, humid air and water.
• The operang temperatures of the computer should be 0 to 45 degrees Celsius.
• To avoid injury, be careful of:
Sharp pins on headers and connectors
Rough edges and sharp corners on the chassis
Damage to wires that could cause a short circuit
1.2 Package Checklist
• Mini-ITX Mainboard x 1
• Fully Setup Driver DVD x 1
• I/O Bracket x 1
• SATA Cable x 1
Note
»
»The package contents may be dierent due to the sales region or models in which it was sold. For
more informaon about the standard package in your region, please contact your dealer or sales
representave.
4 | Chapter 1: Introducon
1�3 Specifications
CPU Intel® Celeron® Processor J1900 (2M Cache, up to 2.42 GHz)
* Co-lay with Intel® Celeron® Processor J1800
Graphic
Integrated Intel® HD Graphics series graphic engine
Graphics Frequency: Intel Graphics HD 688MHz-854MHz
Dual Display: D-Sub 15 Pin + LVDS dual channel 18-24Bits support by Realtek RT2136
Super I/O
FINTEK F81866AD
Provides the most commonly used legacy Super I/O funconality. 128pin type
Environment Control iniaves, H/W Monitor, Fan Speed Controller
Main Memory 1x SO-DIMM (204pin) slot, DDR3L 1333/1066 MHz, Max 8GB
Registered DIMM or ECC DIMM is not supported
SATA
Chipset built-in Serial ATA controller, 2x SATA ports
SATA Version 2.0 specicaon compliant, data transfer rates up to 3.0 Gb/s
*SATA2 Port co-lay with mSATA (PE1) socket
LAN
Realtek RTL 8111G
10 / 100 / 1000 Mb/s auto negoaon, Half / Full duplex capability
* Oponal LAN2
Sound Codec Realtek Codec ALC662, supports Line-out/Mic-in
Expansion Slots
BIMX-100 BIMX-200
1x full-size mPCIe socket (mSATA+USB2.0) 1x full-size mPCIe socket (mSATA)
1x half-size mPCIe socket (PCIe) 1x half-size mPCIe socket (PCIe+USB2.0)
1x SIM card socket (only for BIMX-100)
Back Panel I/O
1x PS2 for Keyboard
1x PS2 for Mouse
1x Printer Port
1x COM Port (co-lay with HDMI port)
1x VGA Port
1x LAN Port (LAN2 is oponal)
4x USB 2.0 Ports
1x Audio Connector
On Board Connectors
& Headers
SATA
2x SATA II up to 3Gb/s HDD connector
* SATA2 is shared with mSATA (PE1) slot
Display
1x 2*15 BOX header, LVDS connector support dual
channel LCD panel
1x 2*3 pins LCD power select jumper (3.3V/5V/12V)
1x 1*3 pins LCD backlight power select jumper
(5V/12V)
1x 1*3 pins LCD backlight control mode select
jumper (PWM/Voltage Level)
1x 1*8 pins LCD backlight inverter connector
Speaker
2x 1*2 pins for Amplier output ALC105 class D
3Wa/Channel Amplier
1x buzzer
Power
1x 4-Pin ATX Power connector DC+12V (BIMX-200)
1x 20-pin ATX Power connector (BIMX-200)
2x 1*4 pins for HDD power 5V
I/O
1x 2*5 pins, USB2.0 pin header support 2 USB
devices
1x 1*4 pins, USB2.0 pin header support 1 USB
device (oponal and shared with PE1/PE2 socket)
5x 2*5 pins COM2/3/4/5/6 ports, RS232
5x 0V/5V/12V select jumpers (COM2/3/4/5/6)
1x 2*5 pins header, digital IO support 4 in 4 out
1x 2*13 pins, parallel header for printer
1x 1*3 pins, system fan header
1x 1*4 pins, CPU fan header
1x 2*5 pins front panel as Power/Reset/HDD/LAN
header
1x 2*3 pins, RS232/422/485 jumper (COM1)
1x 2*3 pins, RS232/422/485 jumper (COM1)
1x 1*3 pins, 0V/5V/12V select jumper (COM1)
Board Size 170 mm (W) x 170 mm (L), Mini-ITX
Operaon Temperature 0°C ~ 60°C
Storage Temperature -20°C ~ 80°C
Relave Humidity 10% ~ 90% (non-condensing)
Watchdog Timer Yes (65536 segments)
OS Support Windows 7, Windows 8.1, Windows 10*
Biostar reserves the right to add or remove support for any OS with or without noce.
Chapter 1: Introducon | 5
BIMX-100/BIMX-200 User’s Manual
1.4 Rear Panel Connectors
BIMX-100
BIMX-200
COM1 Serial Port Connectors (RS232/422/485)
RS-232 (Default) RS-422* RS-485*
Pin Assignment
1 Carrier detect (DCD) 422 TXD- 485 DATA-
2Received data (RXD) 422 TXD+ 485 DATA+
3Transmied data (TXD) 422 RXD+ NC
4 Data terminal ready (DTR) 422 RXD- NC
5 Signal ground (GND) GND GND
6 Data set ready (DSR) NC NC
7 Request to send (RTS) NC NC
8 Clear to send (CTS) NC NC
9*0V, 5V, 12V selected by
jumper (JPC1) NC NC
Note
»
»COM1 voltage selecon is controlled by JPC1. Please see page-12 for detail seng.
»
»COM1 RS-232/422/485 selecon is controlled by JSEL1/JSEL2. Please see page-12 for detail seng.
6 | Chapter 1: Introducon
1�5 Motherboard Layout
Note
»
» represents the 1st pin.
Chapter 2: Hardware installaon | 7
BIMX-100/BIMX-200 User’s Manual
Chapter 2: Hardware installaon
2.1 Central Processing Unit (CPU)
The mainboard includes an onboard Intel® SOC, and a cooler has been installed to provide
sucient cooling.
2.2 Connect Cooling Fans
These fan headers support cooling-fans built in the computer. The fan cable and connector
may be dierent according to the fan manufacturer. Connect the fan cable to the connector
while matching the black wire to pin#1.
CPU_FAN1: CPU fan header
SYS_FAN1: System fan header
CPU_FAN1
Pin Assignment
1 Ground
2+12V
3 FAN RPM rate sense
4 Smart Fan Control
SYS_FAN1
Pin Assignment
1 Ground
2+12V
3 FAN RPM rate sense
Note
»
»Thease fan headers support 3-pin head connectors. When connecng with wires onto connectors,
please note that the red wire is the posive and should be connected to pin#2, and the black wire is
Ground and should be connected to GND.
2.3 Installing System Memory (1.35V only)
DIMMA1: DDR3L Memory Module (204 pin SO-DIMM)
Note
»
»If the DIMM does not go in smoothly, do not force it. Pull it all the way out and try again.
8 | Chapter 2: Hardware installaon
Step 1: Align a DIMM on the slot such that the notch on the DIMM matches the break on the
Slot.
Step 2: Insert the DIMM rmly into the slot unl the retaining chip snap back in place and the
DIMM is properly seated.
Memory Capacity
DIMM Socket Locaon DDR3 Module Total Memory Size
DIMMA1 512MB/1GB/2GB/4GB/8GB Max is 8GB
2.4 Power Supply
JPWR1: 4-pin ATX Power Source Connector (BIMX-100)
This connector provides or +12V input to system power circuit.
Pin Assignment
1+12V in
2+12V in
3 Ground
4 Ground
Chapter 2: Hardware installaon | 9
BIMX-100/BIMX-200 User’s Manual
ATXPWR2: 24-pin ATX Power Source Connector (BIMX-200)
For beer compability, we recommend to use a standard ATX 24-pin power supply for this
connector. Make sure to nd the correct orientaon before plugging the connector.
Pin Assignment Pin Assignment
13 +3.3V 1+3.3V
14 -12V 2+3.3V
15 Ground 3 Ground
16 PS_ON 4 +5V
17 Ground 5 Ground
18 Ground 6 +5V
19 Ground 7 Ground
20 NC 8 PW_OK
21 +5V 9Standby Voltage+5V
22 +5V 10 +12V
23 +5V 11 +12V
24 Ground 12 +3.3V
Note
»» Insucient power supplied to the system may result in instability or the peripherals not funconing
properly. Use of a PSU with a higher power output is recommended when conguring a system with
more power-consuming devices.
JHDD1/JHDD2: HDD Power Connector
This connector provides power connecon of SATA devices.
Pin Assignment
1+12V output
2 GND
3 GND
4+5V output
»
»JHDD2 connector is oponal.
10 | Chapter 2: Hardware installaon
2.5 Jumpers / Headers / Connectors
Jumper Seng
The illustraon shows how to set up jumpers. When the jumper cap is placed on pins, the
jumper is “close”, if not, that means the jumper is “open”.
Pin opened Pin closed Pin 1-2 closed
JCMOS1: Clear CMOS Jumper
The jumper allows users to restore the BIOS safe seng and the CMOS data. Please carefully
follow the procedures to avoid damaging the motherboard.
2 1
Pin 1-2 Open: Normal Operaon (Default)
2 1
Pin 1-2 Close: Clear CMOS data
Clear CMOS Procedures:
1. Remove AC power line.
2. Set the jumper to “Pin 1-2 close”, you can use a metal object like a screwdriver to touch
the two pins.
3. Wait for ve seconds.
4. Aer clearing the CMOS values, be sure the jumper is “Pin 1-2 open”.
5. Power on the AC.
6. Load Opmal Defaults and save sengs in CMOS.
Questo manuale è adatto per i seguenti modelli
1
Indice
Altri manuali Biostar Hardware per computer
Manuali Hardware per computer popolari di altre marche
EMC2
EMC2 VNX Series Manuale del proprietario
Panasonic
Panasonic DV0PM20105 Manuale utente
Mitsubishi Electric
Mitsubishi Electric Q81BD-J61BT11 Manuale utente
Gigabyte
Gigabyte B660M DS3H AX DDR4 Manuale utente
Raidon
Raidon iT2300 Manuale utente
National Instruments
National Instruments PXI-8186 Manuale utente
