1
P A R T S L I S T
Item Qty Description Item Qty Description
A 2 VB50 Standard H 1 Winch
B 2 VB51P-XX Pole Padding I 3 Net Hook
C 2 VB23-CV Floor Plates (If Applicable) J 2 Nylon Net Collars (If Applicable)
D 2 VB23 or VB235 Floor Sockets (If Applicable) K 3 Carabineer
E 4 Cable Covers (If Applicable) L 6 Rope Ratchet (Provided With Net)
F 1 VB1250K Net (includes storage bag) M 2 Positive Lock Pin
G 2 Volleyball Antennas (VB13) (If Applicable)
Inspect all contents prior to installation. Report any missing parts to dealer immediately.
Read all instructions before proceeding.
—— Instruction Manual ——
VB5000
Ace ServeTM Hybrid Volleyball System
Date: 03/22/2017 Rev: I.R. B.A. N.J.C. File: \pub\instructions\volleyball\vb5000inst Ref#: 960907
Customer Service
(800) 247-7668
1. Each VB50 Standard (A) has a total of nine fixed
VB1250K Net (F) height adjustments for each
Junior, Women's and Men's official height. Each
VB50 Standard (A) also has three fixed VB1250K
Net (F) height adjustments for recreational tennis.
Use the pole alignment grooves when sliding the
outer pole up/down to locate each positive lock pin
hole. Use Positive Lock Pin (M) in the positive lock
pin hole that positions VB1250K Net (F) in the
height you desire. See Figure 1.
2. Set VB50 Standards (A) into Floor Sockets (D).
Remove Positive Lock Pin (M) and raise outer pole
of the VB50 Standard (A) to the series of holes
representing men's, women's or junior's height. Use
the pole alignment grooves as a guide to locate
positive lock pin holes. See Figure 1.
3. Lay the VB1250K Net (F) out, find the end with the
factory installed rope ratchet device on the bottom
rope. Install the opposite end of the VB1250K Net
(F) to the non-winch VB50 Standard (A) by
attaching the top loop of the VB1250K Net (F) onto
the Net Hook (I). Attach the other end of the
VB1250K Net (F) to the cable attached to the Winch
(H). See Figure 2.
Inner Pole
Positive Lock
Pin Holes
Outer Pole Outer Pole
Positive Lock
Pin Holes
Inner Pole Pole Alignment
Grooves
Positive Lock
Pin (M)
Net Hook (I)
Figure 1
Please use the instructions provided with VB23-CV Floor Plates (C) and VB23 or VB235 Floor Sockets (D)
for new court installation
