Fan header
ARGB header (3Pin 5V)
Connect fans on controller
SATA
Connect SATA cable on the controller
Press ON on remote to turn on the light
Short press to turn on the light.
Long press to switch to remote
control.
Press this key to enter the auto
play mode when it is on.
Press to turn off the light.
Accelerate the fan speed.
Slow down the fan speed.
select the mode up.
select the mode down.
Brightness +
Brightness –
Long Press to switch to motherboard
control.
Press the buttons of different colors
and the corresponding light colors
will appear.
SE Remote
Rated voltage DC12V/DC5V
With 7 of ARGB 3Pin 5V sockets, 6 of 12-volt fan
sockets.
A single ARGB sockets can bear up to 36 LEDs
Fan sockets support up to 8 of 12V DC fans
A total of 39 lighting illumination modes
The light can be controlled by the remote control
compatible with Asus AURA SYNC, MSI Mystic
Light, Gigabyte RGB Fusion 2.0, Asrock Po
loychrome SYNC and Biostar VIVID LED DJ.
ARGB header (3Pin 5V)
SATA Power Header
SE Controller
Quick Installation Guide
Operating Voltage
Starting Voltage
Max. Current
Speed
Air Flow(CFM)
Air Pressure(H²O)
Noise dB(A)
Bearing Type
Accessories
Dimensions
Fan: 12Vdc ± 5%
LED: 5Vdc ± 5%
5Vdc
0.35A
1200r.p.m±10%
42 CFM±10%
0.67 mm H²O
22 dB(A)
Rifle Bearing (RFB)
Fan Screw x 4
120 x 120 x 25mm
Spectre ARGB Fan
