BIXOLON SRP-382II Istruzioni per l'installazione
SRP-380/382II
Command Manual
Ver. 1.00
http://www.bixolon.com
SRP-380/382II
Ver. 1.00 BIXOLON
- 2 -
■ Contents
1. Notice ....................................................................................................................................................................................................... 3
2. Control Commands List in Alphanumeric Order ................................................................................................................................... 4
2-1 Command Description Items ...................................................................................................................................................................... 6
2-2 Details of Control Commands ..................................................................................................................................................................... 7
SRP-380/382II
Ver. 1.00 BIXOLON
- 3 -
1. Notice
This document contains proprietary information of BIXOLON Corporation and its affiliates. You may utilize the information solely
for the purpose of facilitating authorized sales and service of, or developing software and similar products for authorized use with,
BIXOLON products, provided that such proprietary information may not be used, reproduced, or disclosed to any other parties for
any other purpose without the prior written permission of BIXOLON Corporation. BIXOLON has no liability for loss or damage
arising from or relating to your use of or reliance on the information in the document.
We at BIXOLON maintain ongoing efforts to enhance and upgrade the functions and quality of all our products. In following,
product specifications and/or user manual content may be changed without prior notice.
SRP-380/382II
Ver. 1.00 BIXOLON
- 4 -
2. Control Commands List in Alphanumeric Order
No.
Command Function
No.
Command Function
1 HT Horizontal tab
26 ESC R Specify an international character set
2 LF Print and line feed
27 ESC S Select standard mode
3 FF Form feed (in page mode)
28 ESC T Select print direction in page mode
4 CR Print and carriage return
29 ESC V Turn 90° clockwise rotation mode on/off
5 CAN Cancel the print data in page mode
30 ESC W Set print area in page mode
6 DLE EOT Transmit real-time status
31 ESC \ Set relative print position
7 DLE DC4 Generate pulse at real-time
32 ESC a Set position alignment
8 ESC SP Set the character right space
33 ESC d Print and feed n lines
9 ESC ! Set print mode
34 ESC i Partial cut
10 ESC $ Set absolute print position
35 ESC m Partial cut
11 ESC % Select/cancel user-defined character set
36 ESC p Generate pulse
12 ESC & Define user-defined character set
37 ESC t Select character code table
13 ESC * Specify bit image mode
38 ESC v Transmit paper sensor status
14 ESC - Turn underline mode on/off
39 ESC { Turn upside-down print mode on/off
15 ESC 2 Select default line spacing
40 FS p Print NV bit image
16 ESC 3 Set line spacing
41 FS q Define NV bit image
17 ESC = Select peripheral device
42 GS ! Select character size
18 ESC ? Cancel user-defined characters
43 GS $ Set absolute vertical print position in
page mode
19
ESC @
Initialize printer
44
GS ( A
Execute test print
20 ESC D Set horizontal tab positions
45
GS ( L
GS 8 L Select graphics data
21 ESC E Turn emphasized mode on/off
46 GS ( k Specify and print the symbol
22 ESC G Turn double-strike mode on/off
47 GS * Define downloaded bit image
23 ESC J Print and feed paper
48 GS / Print downloaded bit image
24 ESC L Select page mode
49 GS : Start/end macro definition
25 ESC M Select character font
50 GS B Turn white/black reverse print mode on/off
SRP-380/382II
Ver. 1.00 BIXOLON
- 5 -
No.
Command Function
51 GS H Select print position of HRI characters
52 GS I Transmit printer ID
53 GS L Set left margin
54 GS V Select cut mode and executes a partial cut
55 GS W Set print area width
56 GS ^ Execute macro
57 GS a Enable/Disable Automatic Status Back (ASB)
58 GS f Select font for HRI characters
59 GS h Set bar code height
60 GS k Print bar code
61 GS r Transmit status
62 GS v 0 Print raster bit image
63 GS w Set bar code width
64 BS M Select device font type
65 BS V Select cut mode and executes a partial/full
cut
66 BS ^ P Set power saving mode
SRP-380/382II
Ver. 1.00 BIXOLON
- 6 -
2-1 Command Description Items
Command
Function: Command function outline
Code: Command format expressed in ASCII, hexadecimal, and decimal codes
Range: Argument value (Setting range) for the command
Default: Initial argument value for the command
Description: Detailed command function description
Remarks: Additional information about using the command
Differences: Variations depending on the printer model
SRP-380/382II
Ver. 1.00 BIXOLON
- 7 -
2-2 Details of Control Commands
HT
Function: Horizontal tab
Code: ASCII HT
Hex 09
Decimal
9
Range: None
Default: None
Description: This command moves the print position to the next
horizontal tab position. If the next horizontal tab position is
not specified, this command will be void.
Remarks: ■ The horizontal tab position is set by <ESC> D.
■ With the underline mode turned on, the underline printing is not applied to the tab space created by this
command.
Differences: None
SRP-380/382II
Ver. 1.00 BIXOLON
- 8 -
LF
Function: Print and line feed
Code: ASCII LF
Hex 0A
Decimal
10
Range: None
Default: None
Description: This command prints the data in the print
buffer and feeds one line based on the current set line spacing in
standard mode.
Remarks: ■ In page mode, the printer does not perform actual printing, but moving only the print position to the next
line.
Differences: None
SRP-380/382II
Ver. 1.00 BIXOLON
- 9 -
FF
Function: Form feed (in page mode)
Code: ASCII FF
Hex 0C
Decimal
12
Range: None
Default: None
Description: This commands prints all data collected in the printer buffer In page mode. A
fter completion of printing, the
printer is returned to standard mode.
Remarks: ■ The printer is returned to standard mode after completion of printing.
■ This command works in page mode enabled by ESC L.
■ If the paper is positioned at the print starting position, this command is ignored, not performing actual paper
feeding operation.
Differences: None
SRP-380/382II
Ver. 1.00 BIXOLON
- 10 -
CR
Function: Print and carriage return
Code: ASCII CR
Hex 0D
Decimal
13
Range: None
Default: None
Description:
This command prints the data. With auto line feed enabled, it performs printing and one line feeding same as
LF.
Differences: None
Altri manuali per SRP-382II
1
Questo manuale è adatto per i seguenti modelli
1
Indice
Altri manuali BIXOLON Etichettatrice
BIXOLON
BIXOLON SRP-E770III Series Manuale utente
BIXOLON
BIXOLON SLP-TX400R Manuale del proprietario
BIXOLON
BIXOLON SRP-770II Manuale utente
BIXOLON
BIXOLON SLP-T400 Manuale utente
BIXOLON
BIXOLON SLP-TX400 Manuale utente
BIXOLON
BIXOLON SLP-TX223B Manuale utente
BIXOLON
BIXOLON XT5-40 Series Istruzioni per l'installazione
BIXOLON
BIXOLON SLP-DL410KV Manuale utente
BIXOLON
BIXOLON SLP-DX223B Manuale utente
BIXOLON
BIXOLON XL5-40CT Series Manuale utente
BIXOLON
BIXOLON XT5-40 Series Manuale utente
BIXOLON
BIXOLON XQ-840 Series Manuale utente
BIXOLON
BIXOLON XD Series Manuale utente
BIXOLON
BIXOLON XD5-40tR Series Manuale utente
BIXOLON
BIXOLON XM7-40 Manuale utente
BIXOLON
BIXOLON SRP-770/UPS Manuale utente
BIXOLON
BIXOLON XT2-40 Series Manuale utente
BIXOLON
BIXOLON SLP-TX400 Manuale utente
BIXOLON
BIXOLON XL5-40CT Series Manuale utente
BIXOLON
BIXOLON SLP-DL413 Manuale utente
