Page. 8
When the Tablet is connected to the Wi-Fi, it must be indicated with the Wi-Fi icon on the top
right corner of the tablet:
In the event of failure connecting to the network, check the following points:
a) Make sure the router is on and the boot sequence has finished. The LEDs 1, 2, 4 of the
router should be on. If there’s also an internet connection, LED 3 should be on.
b) If LED 4 does not light, connect the ethernet cable between the router and the
computer as indicated on section 1 of this manual.
c) WIFI connections on the tablet must be enabled.
d) Make sure the password is correct.
e) To avoid possible failures, delete all the Wi-Fi networks stored on the tablet, by
entering each network and clicking on "Forget Network" button.
5. After selecting SHX_WIFI it will
be necessary to introduce the
password. By default, the
password is TEmporal123456.
If the connection has been
established correctly, it will
appear as connected:
