BKT Elektronik BPS2000v2 Manuale utente

Operang Instrucons - BPS2000v2 Monitoring Power Distribuon Unit

a

Instrucons

S2000v2 Mo

Operang Instrucons

BPS2000v2 Monitoring Power Distribuon

Ver.01.22

Operang Instrucons - BPS2000v2 Monitoring Power Distribuon Unit

Table of contents

1. Safety precauons

......................................................................................................................................3

2. Foreword

.....................................................................................................................................................3

3. Package contents

….....................................................................................................................................3

4. Applicaon of BPS2000 unit

.......................................................................................................................3

5. Installaon of BPS2000 unit

……………….......................................................................................................4

6. Unit BPS2000 general characteriscs ……….………….……..............................................................................5

6.1 View of the control module, including a descripon of the connectors ………................................6

6.2 LCD display interface for 250V single phase version ….…................................................................7

6.3 LCD display interface for 400V three phase version ….…................................................................8

7. Managing the BPS2000 unit .

…………………………..………………………………………………………………………….....….10

7.1 Access through web browser …...…….............................................................................................10

8. Seng the unit BPS2000 to the factory conﬁguraon

…………..................................................................17

9. Access via Telnet protocol

………………........................................................................................................18

10. Access via SNMP protocol

……………..…………............................................................................................24

10.1 OID table..……...............................................................................................................................25

11. Access via ModBus TCP protocol

……………...….........................................................................................32

12. Access via ModBus RTU protocol..

..........................................................................................................33

12.1 Modbus RTU/TCP memory map...................................................................................................35

13. Technical parameters of BPS2000 unit

………………………………………………….………………………………..……….40

13.1 Control module speciﬁcaon …..…….…………………..……………………………………………………...…………41

13.2 Addional accessories ……….…………….…………………………………...…………………………………...…………41

14. Warranty .

……………………………….………………………………………………………………….………………………….………..42

15. BPS2000 unit soware update

……………………..…………………………………………………….……….…….…......…....46

Operang Instrucons - BPS2000v2 Monitoring Power Distribuon Unit

1. Safety precauons

• The unit must only be installed by qualiﬁed personnel in accordance with the following installaon and

operang instrucons.

• The manufacturer is not liable for incorrect use of the device, in parcular use of the device that could

lead to health injury or material damage.

• The device should not be opened or disassembled when it is live.

• The device may only be connected to a 230V AC power outlet (50Hz or 60Hz) for the single-phase ver-

sion and 380-400V (50Hz/60Hz) for the three-phase version in star arrangement.

• Power cords, plugs and sockets should be in good technical condion. The device should always be con-

nected to a properly earthed socket.

• The device is intended for indoor use only. Do not install the device in locaons where excessive mois-

ture or high temperatures may occur.

• For safety and oﬃcial approval reasons, do not modify the device without prior authorizaon.

• Also, refer to the instrucons for use and safety instrucons for the connected devices.

• If aer reading the manual, you have any quesons regarding the installaon, operaon or use of the

device, please contact the customer service department.

2. Foreword

The BPS2000 monitoring power distribuon unit allows for power distribuon and monitoring of power

supply voltage, total current load, total acve, reacve and apparent power consumpon. In addion,

the unit has integrated power consumpon meters and enables measurement of power factor (cosφ).

The units are equipped with a new generaon replaceable control and measurement module with a built

-in LCD display working in “hot swappable” technology, which displays informaon about power supply

voltage, current load, acve power consumpon and energy consumpon.

Thanks to the applicaon of SNMP and ModBus RTU protocols, it is possible to fully integrate the

BPS2000 unit with external management soware.

3. Package contents

x BPS2000 series PDU

• Supply cord: 2M (RJ45/RJ45)

• Quick start instrucons

x Mounng brackets (111SA200014.3 )

4. Applicaon of BPS2000

The BPS2000 units are used in IT, ICT, Data Center and power distribuon environments. In addion, they

allow monitoring of electrical parameters at the power input of the PDU along with monitoring of environ-

mental condions in the server rack.

Operang Instrucons - BPS2000v2 Monitoring Power Distribuon Unit

5. Installaon of BPS2000 unit

The BPS2000 units are designed for vercal installaon as shown in the ﬁgure below.

As a standard, the units can be mounted with ﬁxed brackets or brackets dedicated for 4DC and SRS/SSRS rack

cabinets.

PDU brackets for BKT 4DC racks of width 600/800 mm (set)

Index: 111SA200014.3

PDU brackets for BKT SRS/SSRS racks (ordered separately)

Index: 111SA200018.3

Example of mounng the unit in 4DC rack cabinet, mounng to the 19" proﬁle front and side view

Operang Instrucons - BPS2000v2 Monitoring Power Distribuon Unit

6. BPS2000 general characteriscs

The BPS2000 monitoring device is a power distribuon device that allows monitoring electrical parame-

ters at the unit's input. It is equipped with a management module that allows supervision and control of

electrical parameters with access via a web browser. Units are available in single-phase and three-phase

designs with a load of 16A to 32A for each phase.

Units can be equipped with IEC320 C13, IEC 320 C19, NF C61-314 (st.PL/FR) or

DIN49440 (Schuko), also available with a disconnect lock for C13/C19 sockets.

Funconality:

Monitoring of electrical parameters at the PDU input:

• Unit power supply voltage [V]

• Total current load of the unit [A]

• Acve Power, Apparent Power, Reacve Power [kW, kVA, kVAR]

• Energy consumpon/counter of acve energy, apparent energy [kWh, kVAh]

• Power factor [PF] (cosɸ)

• Frequency [Hz]

Monitor environmental condions with dedicated sensors:

• temperature and humidity

• door opening, ﬂooding, smoke

The unit is equipped with an interchangeable management module made with technology

"Hot Swappable." Replacement of the module does not cause interrupon of power supply to the re-

ceivers. The web interface is available from any web browser in Polish and English.

Communicaon is carried out using built-in network and communicaon protocols:

• SNMPv1/v2c/v3, Modbus RTU, Modbus TCP/IP

• HTTP, SMTP, Telnet

• IPv4/IPv6

Operang Instrucons - BPS2000v2 Monitoring Power Distribuon Unit

6.1. View of the control module with descripƟon of the connectors

x DescripƟon of connectors, controls and LED lights

1. Led lights:

RUN

: operang status of the control module

indicates correct status of the device - ﬂashing green LED (1:1)

kWh

: energy count pulse signaling

ALM

: alarm status

Normal state - LED oﬀ

Fault - LED blinking red (1:1)

2. Menu - main menu of control module

3. Up - moves to the next LCD screen

4. Down - returns to the previous LCD screen

5. Reset - control module restart

6. T/H - port for connecng temperature/humidity sensor

7. NET(RJ45) - Network port

Descripon of LED lights:

yellow/status - ON: port is connected, OFF: port is disconnected, blinking: data is transmied

green/rate - ON: 100Mbps, OFF: 10Mbps

8. SB - Sensor Box environmental condions module connecon port

9. OUT - serial communicaon output port RS485 (Modbus RTU/SNMP)

10. IN - serial communicaon input port RS485 (Modbus RTU/SNMP)

11. LCD screen

Operang Instrucons - BPS2000v2 Monitoring Power Distribuon Unit

6.2 LCD display interface for 250V single phase version

Screen 1

Read: Phase(L1) / Load(0.0A) / Voltage(237.6V) / Acve power (0.0kW) / Energy(0.0kWh)

Screen 2

Read: Phase(L1) / Load(0.0A) / Voltage(237.6V) /Acve power (0.0kW)/Power factor (0.00)

Screen 3

Read: the IP address of the BPS2000

Screen 4

Read/Write*: Master/Slave conﬁguraon for SNMP or ModBus RTU

Address: 00 indicates that the unit is in master mode

Address: 01 ÷04 indicates that the unit is working in Slave mode from 1 to 4

Screen 5

Read/Write*: Seng of threshold values, maximum for the following parameters

Load(32A)/ Voltage(250.0V)/ Temperature(44°C)/ Humidity(99%).

32A

250 V

44 °C 99 %

Add

192

168 000

163

Press UPPress

Screen 1 Screen 2

Screen 5

Press

Screen 3 Screen 4

L1 0.00A

237.6V 0.0kW

000012.5kWh

L1 0.00A

237.6V 0.0kW

PF-0.00

Operang Instrucons - BPS2000v2 Monitoring Power Distribuon Unit

6.3 LCD display interface for 400V three phase version

Screen 1

Read: Phase(L1) / Load(0.0A) / Voltage(237.6V) / Acve power(0.0kW)/ Energy(000000.kWh)

Screen 2

Read: Phase(L1) / Load(0.0A) / Voltage(237.6V) / Acve power(0.0kW)/ Power factor(0.00)

Screen 3

Read: Phase(L2) / Load(0.0A) / Voltage(235.5V) / Acve power(0.0kW)/ Energy(000000.0kWh)

Screen 4

Read: Phase(L2) / Load(0.0A) / Voltage(235.4V) / Acve power(0.0kW)/ Power factor(0.00)

Screen 5

Read: Phase(L3) / Load(0.0A) / Voltage(234.9V) / Acve power(0.0kW)/ Energy(000000.0kWh)

Screen 6

Read: Phase(L3) / Load(0.0A) / Voltage(235.0V) / Acve power(0.0kW)/ Power factor(0.00)

Screen 7

Read: the IP address of the BPS2000

Screen 8

Read/write*: Master/Slave conﬁguraon

Address: 00 indicates that the unit is in master mode

Address: 01-04 indicates that the unit is working in Slave mode from 1 to 4

Screen 9

Read/write*: Seng of threshold values, maximum

Phase(L1) / Load(16A) / Voltage(276.0V) / Temperature(40°C) / Humidity(99%)

Screen 10

Read/write*: Seng of threshold values, maximum

Phase(L2) / Load(16A) / Voltage(276.0V) / Temperature(40°C) / Humidity(99%)

Screen 11

Read/write*: Seng of threshold values, maximum

Phase(L3) / Load(16A) / Voltage(276.0V) / Temperature(40°C) / Humidity(99%)

Operang Instrucons - BPS2000v2 Monitoring Power Distribuon Unit

6.3 LCD display interface for 400V three phase version

Press

Screen 1

L1 0.00A

237.6V 0.0kW

000012.5kWh

Screen 7

L3 0.00A

234.9V 0.0kW

000019.1kWh

Screen 6

Screen 2

L1 0.00A

237.6V 0.0kW

PF-0.00

Press

Screen 3

L2 0.00A

235.5V 0.0kW

000020.4kWh

Press

L3 0.00A

235.0V 0.0kW

PF-0.00

Screen 5

Press

192

168 0

163

Screen 4

Press

L2 0.00A

235.4V

0.0kW

PF-0.00

Screen 8

Add

Screen 9

16A

276

40°C 99%

Screen 10

16A

276

40°C 99%

Press

Screen 11

16A

276

40°C 99%

Press

Operang Instrucons - BPS2000v2 Monitoring Power Distribuon Unit

7. BPS2000 unit management

BPS2000 unit has a built-in web server for communicaon over the Ethernet. No addional soware is

required to communicate with the unit. The soware allows to manage the unit, conﬁgure alarms, ne-

twork sengs and remotely restart the device. The web interface has been wrien in Polish and

English.

7.1 Access through a web browser

1. The unit has a factory-set ﬁxed IP address: 192.168.0.163

2.Enter the IP address of unit BPS2000 into the browser and press Enter, the login

window will appear. T

The default username is admin with the password admin

3. Aer logging in, the web interface is available in two language versions (Polish and English).

Indice

Altri manuali BKT Elektronik Controllori di accesso IP

BKT Elektronik

BKT Elektronik ACBS Manuale

Manuali Controllori di accesso IP popolari di altre marche

ZKTeco

ZKTeco SpeedFace-V5L Manuale utente

Jantar

Jantar REX A-1-9 Manuale utente

2N Access Unit Foglio di istruzioni

Kedacom

Kedacom KSCA120 Series Manuale utente

H3C

H3C WX2880X Manuale utente

G4S

G4S S870-EX Guida

PRASTEL

PRASTEL M2000PE Manuale utente

Allegion

Allegion interflex IF-281 Cylinder Manuale utente

TECOM

TECOM TS1067E Manuale utente

Fermax

Fermax Memokey 100C Guida utente

Fermax

Fermax CITYLINE MEMOKEY Manuale di istruzioni

Software House

Software House iSTAR Pro 2U RM Manuale di istruzioni

AKCP

AKCP SP+ Manuale utente

Bpt

Bpt HNA/102 Manuale utente

Civintec

Civintec CV9601T-T-1F Manuale utente

BioMax

BioMax N-X90W Manuale utente

ZKTeco

ZKTeco OP-200 Manuale utente

FingerTec

FingerTec s-Kadex Manuale utente