Black & Decker BX250 Manuale utente

BX250 Blender

BX250

Please read through this booklet for safe and efficient use of the appliance.

We urge you to read the "Do's & Don'ts" section and also follow all detailed

instructions even if you are familiar with a similar appliance.

Keep this guide handy for future reference.

First Use Safety Recommendation

While using electrical appliances, in order to reduce the risk of fire, electric shock,

and / or injury to persons, basic safety precautions should be followed, including the

following:

• Read all instructions carefully, even if you are familiar with the appliance.

• To protect against the risk of electric shock, DO NOT IMMERSE the appliance,

cord set or plug in water or other liquids.

• To clean, wipe the exterior with a damp cloth.

• Close supervision is necessary when any appliance is used near children. Do not

allow children or any person unfamiliar with these instructions use this appliance.

Never leave an appliance unattended when in use.

• Switch off and remove the plug from the power outlet when not in use, before

assembling or disassembling parts, cleaning or carrying out any maintenance of

the appliance. Never pull the cord while unplugging out from power outlet.

• Do not operate any appliance with a damaged cord or plug, or after the appliance

malfunctions, or is dropped or damaged in any manner. Return the complete

appliance to your nearest authorized service facility for examination, electrical

repair, mechanical repair or adjustment to avoid any hazard.

• The use of attachments or accessories not recommended or sold by this

appliance manufacturer may result in fire, electric shock or personal injury.

• Do not let the cord hang over the edge of a table, counter, or touch hot surfaces.

• Avoid touching hot surfaces, use handles and knobs.

• Do not operate or place any part of this appliance on or near any hot surfaces

(such as gas or electric burner or in a heated oven).

• Do not abuse the cord. Never carry the appliance by the cord or yank it to

disconnect it from the outlet; instead, grasp the plug and pull to disconnect.

• When using an extension cord with your appliance, make sure the extension cord

is correctly wired, and rated for its use.

• This product is intended for household use only.

• Do not attempt to repair the appliance yourself; instead, take it to your Black &

Decker-owned or Authorized Service Centre for repair.

• Care should be taken when handling slicing discs & blade, especially when

removing them from the holders and during cleaning.

• Keep children and animals away from the appliance and cord set.

IMPORTANT SAFEGUARDS

SAVE THESE INSTRUCTIONS

Parts Identification

1. Motor Unit

2. Speed Switch

3. Power Cord

4. Blade Assembly

5. Blending Jar

6. Jar Lid

7. Measuring cup

8. Grinder jar - 2 nos.

9. Grinder blade assembly

10. Cheese blade assembly

Product Features

350W of motor power to take care of toughest grinding needs

Cord storage to reduce clutter

Non slip rubber feet for a firmer grip of product on standing platform.

1.5 lt transparent jar for meeting your daily requirements

70 gms Dry Grinder & Cheese Grater unit for meeting all your small dry grinding & cheese grating

requirements.

How to use your Blender :-

Your blender is designed for indoor household blending and grinding operations only.

• Remove all the packaging from the product.

• Wash the jar, lid, measuring cup and blade assembly in warm sudsy water and dry it thoroughly.

• Ensure that the rated voltage on your appliance is the same as the line voltage in the socket you

will be using to operate your blender.

• Your blade assembly has a sealing ring, which can be removed while cleaning and

should be replaced immediately to prevent damage and loss. (figure A)

• Now take the blade assembly with the sealing ring in place and rotate it

anticlockwise lock it in place at the bottom of the blender jar. (figure B)

• Place the assembled jar on the main unit with the handle positioned on the

right side of the unit as shown in the figure C.

• Put your ingredients into the jar before plugging it into the power supply.

• Place the lid on the jar and rotate it clockwise to lock it in position. The lid

will also operate the safety switch which will make the unit operational.

NOTE: Unless the lid is in the locked position the unit will not work.

• Select the desired speed to mix and blend the ingredients in the jar.

• Turn the Knob to "0" position and wait until blades have stopped before removing the jar.

NOTE : Never run the blender continuously for more than 2 minutes in a stretch. Turn off as soon

as the right consistency is reached. If you want to continue operating the blender, allow a rest of

not less than 1 minute between operating cycles.

Fig. A

Fig. B

Fig. C

How to use your Dry Grinding / Cheese Grating Mill

• Make sure that the switch is in the off position.

• Place the ingredients in the grinder Jar (figure D)

• Tighten the grinder blade / cheese blade assembly

(ensure that the sealing ring is in place) onto the grinder jar by

rotating it anticlockwise. (figure E)

• Assemble the mill assembly onto the main unit by locking

it in position by rotating it anticlockwise. (figure F)

• Use the pulse operation 2~3 times initially to mix the ingredients.

• Now select the speed till the desired consistency is achieved.

• When the grinding / grating is finished turn the speed knob to "0" position and wait till the

blade comes to complete stop.

• Remove the mill assembly from the main unit by rotating it clockwise.

• Hold the mill assembly as shown in figure D, rotate the blade assembly clockwise & lift it

from the jar. You can then pour the contents out.

NOTE:

- Never use the mill assembly for more than 30seconds without interruption. Allow the

grinder to cool down for at least one minute between two consecutive operating cycles.

- Never forget to place the sealing ring in the grinder blade assembly

(figure G). If it is not present or damaged, it will cause leakage

of ingredients during usage.

- Your mill is meant for grinding small quantities of dry ingredients.

- Never use the grinder to grind very hard ingredients such as nutmeg, turmeric etc.

- The Grinding mill cover will get discoloured when the grinder is used to process

ingredients such as cloves, anise etc.

Control Panel

1. Position "0" - the unit does not operate, and it is in OFF position.

2. Position "P"- the unit will operate at high speed as long as

the knob is held in this position. (figure H)

3. Position "1" - the blender works at low speed.

4. Position "2" - the blender works at high speed.

To Crush Ice

• Liquid must be used to crush ice.

• To make frozen drinks, fill the jar with liquid upto desired level ( max half the jar capacity)

and then put in ice cubes ( the max size of diced ice cubes should be not more than 2cms).

• Blend / crush the content till desired consistency is achieved, then turn the knob to the

"0"position.

NOTE : Do not crush ice without liquid.

Fig. D

Fig. E

Fig. F

Fig. G

Fig. H

How to care for your Blender

Wash the blender jar and its associated parts in warm sudsy water after each use. Dry all parts

thoroughly before storing. These parts are not dishwasher safe. Powdered cleanser and abrasive

pads will damage the surface of the parts. Remove stubborn stains by soaking and wiping with

soft cloths and mild liquids. Wipe the motor unit with a damp cloth only.

NOTE : Never immerse the motor unit in liquids.

To clean the base, wipe clean with a damp cloth. Allow to dry thoroughly before re-using or

storing.

To prolong the life of the blender, always :-

1. Use it on a flat dry surface.

2. Switch off before you scrape food down the inside of the jar with a long handle spatula.

3. Make sure that there is something in the jar each time you switch on. The cutter bearing may

get damaged if run dry.

4. Cut cooked meats into one centimeter cubes before adding into the jar.

5. Remember that a blender cannot process raw meat.

6. Ensure that the food being blended is not too thick or heavy for the motor to handle. If it

seems to be having difficulty, either add a little liquid through the lid or switch off, remove the lid

and scrape the mixture down towards the blade with a spatula.

7. Please DO NOT use the jar for storing foods or beverages.

Some Do's and Don'ts

• Never allow items of jewellery, clothing, long hair etc. to come in contact with moving parts.

• Special care should be taken when handling the cutting blades, especially when handling the

blade, emptying the jars, and during cleaning.

• Always allow the motor to stop turning before removing any cover or accessory.

• Do not touch any moving part until it has stopped turning.

Speed Function Ingredients Time (Maximum quality)

0 OFF

1 Stirring & Mixing All liquids, fruits & warm soups 40-60 seconds (max 1.25 lt)

1 & 2 Puree/Smoothie Vegetables, baby food, yogurt 60-120 seconds

drink and deserts ( Max 1.25 lt)

P & 2 Grinding Dry grinding 30 seconds ( max 50 gms)

P & 2 Ice Crushing Ice cubes (max 200 gms) & 30-45 seconds

liquid (max 500 ml)

P & 1 Cheese Grating Cheese 10-15 seconds (max 50 gms)

P 2-5 seconds

Speed Guide:-

• Always allow the rotating parts to come to a full stop before removing any accessory.

• Always use a long spatula to scrape / mix the ingredients inbetween blending process. Never

use your bare hands to scrape the inside of the jar.

• Never leave the appliance unattended while in use.

Protecting the environment

Separate collection. This product must not be disposed of with normal household waste.

Should you find one day that your Black & Decker product needs replacement, or if it is of no

further use to you, do not dispose it off with other household waste. Make this product available for

separate collection.

Separate collection of used products and packaging allows materials to be recycled and

used again. Use of recycled materials helps prevent environmental pollution and reduces the

demand for raw materials.

Local regulations may provide for separate collection of electrical products from the household, at

municipal waste sites or by the retailer when you purchase a new product.

Black & Decker provides a facility for the collection and recycling of Black & Decker products once

they have reached the end of their working life. To take advantage of this service please return your

product to any authorised repair agent who will collect them on our behalf. You can check the

location of your nearest authorised repair agent by contacting your local Black & Decker office at

the address indicated in this manual.

Indice

Altri manuali Black & Decker Miscelatore

Black & Decker

Black & Decker ProBlend BL5001 Istruzioni per l'installazione

Black & Decker

Black & Decker BL0876 Series Manuale utente

Black & Decker

Black & Decker PartyMate DM100 Series Istruzioni per l'installazione

Black & Decker

Black & Decker FusionBlade PB2004G Manuale utente

Black & Decker

Black & Decker BLC12650HBC Istruzioni per l'installazione

Black & Decker

Black & Decker BXJB800E Manuale utente

Black & Decker

Black & Decker BL300 Manuale utente

Black & Decker

Black & Decker BLC18750DM Manuale utente

Black & Decker

Black & Decker BS600 Manuale utente

Black & Decker

Black & Decker Crush Master BL14451G Istruzioni per l'installazione

Black & Decker

Black & Decker POWERCRUSH BL1300DG-T Manuale utente

Black & Decker

Black & Decker BlP6601M Istruzioni per l'installazione

Black & Decker

Black & Decker BL1900R Istruzioni per l'installazione

Black & Decker

Black & Decker PB1002 Manuale utente

Black & Decker

Black & Decker HB24710-CL Istruzioni per l'installazione

Black & Decker

Black & Decker BLM14600DG Istruzioni per l'installazione

Black & Decker

Black & Decker BL2010BGC Manuale utente

Black & Decker

Black & Decker BL2020R Manuale utente

Black & Decker

Black & Decker IceCrush BL2208GB Manuale utente

Black & Decker

Black & Decker BL2010BPA Manuale utente

Black & Decker

Black & Decker FusionBlade PBJ2000 Manuale utente

Black & Decker

Black & Decker BX560 Manuale utente

Black & Decker

Black & Decker Crush Master BLM10350MB Istruzioni per l'installazione

Black & Decker

Black & Decker BL1200 Series Manuale utente

Manuali Miscelatore popolari di altre marche

ROTOR

ROTOR 1125.201 Manuale utente

Braun

Braun Multiquick 5 Vario series Manuale utente

ARENDO

ARENDO MIRA 305424 Manuale utente

CHEF-BUILT

CHEF-BUILT CCB-3500 Manuale utente

Viconte

Viconte VC-4406 Manuale utente

Oster

Oster BLSTAB-CB0 Manuale utente

HOFFEN

HOFFEN MC-3005 Manuale utente

Sunbeam

Sunbeam 4182 Manuale utente

Bialetti

Bialetti FMX35 Manuale utente

Duronic

Duronic BL530 Manuale utente

Exquisit

Exquisit MS 3002 wes Manuale utente

Lumme

Lumme LU-KP1891A Manuale utente

Binatone

Binatone HB-735 Manuale utente

Moulinex

Moulinex LM936E10 Manuale utente

Oster

Oster VERSA Manuale di installazione e funzionamento

Ninja

Ninja NN210Q Manuale utente

Vigan Mammoth

Vigan Mammoth TM4V1 Manuale utente

Braun

Braun MR 4050 BC Manuale utente