Click on the CGMINER button in the top right corner on the main page. In the cgminer
configuration, input the pool address, username and password. he user has the choice to
change the overclock selection as well. here are four options: 800Hz/s, 1000Hz/s,
1100Hz/s and 1200Hz/s. After choosing the configuration, click SAVE button in the top
right corner to save, the cgminer will restart.
User can Insert Pool Information as stated in the pool general information stratum+tcp://
(POOLADDRESS) : (POR )
his information can be copied from the pool’s web page, or “How to/FAQ” section.
Note: User can setup up 3 different pool addresses. Once the setup is completed the pool address
will be switched automatically if any of them is unreachable.
CANCEL – situated in the top LEF corner, this button cancels the changes and brings the user to
the main screen.
SA E – clicking this button, will save any changes and will restart the miner.
NO E: User should allow some time for miner to restart and if it does not happen, user should
wait for few minutes longer. If miner is still not running plug out the power cord, wait for
minimum 15 seconds, then plug it back in.
O ER CLOCKING: User can use this option to overclock or under-clock the chip. Please
note that a stable performance is not guaranteed at any other frequency above the
default 1000Hz. User can select a frequency from the drop down menu. To save the
change, the SA E button should be clicked on.
IMPORTANT:
•Please note that any custom overclocking, disassembling the device, replacing default
parts with custom ones can damage or prevent the device from working.
•Do not remove power supply from miner when power is on. Make sure that device is shut
down completely before removing power supply.
•Do not apply excessive force when inserting power supply in to device.
•Please avoid water from entering any part of the device. If water has been spilled on the
device, turn it off immediately and dry it well with hair drier, let it dry for a few days
before attempting to power the device on.
•Please do not insert any items in the airflow openings on the case, doing so may cause
device to stop working and a short circuit which will disable the device and void the
warranty.
•Avoid touching working miner, or any of the parts such as power supply, without proper
anti-static protection, Gloves/bracelet.
•Note that mechanical damage, disassembling the device, any customization or
modifications will void the device’s warranty.
•Network security: If your running on an untrusted Local Area Network (e.g public places,
shared accommodation, unsecured network, open WiFi, etc.), your Prospero as default, is
not secure. Steps are need to be taken, such as changing root passwords, and software
settings to lock it down. Check the online help, or contact support for help. Note, that the
web interface is secure by design, and you can open it up to outside access on port 443.
9 | P a g e
