Black Box NL600 Manuale utente
NL600
————User Manual
浏
览
器
【Notice】
Thank you for purchasing Black Box.
In order to easily use this device, please read the manual before using.
The product version may upgrade in ceaseless, this document is used only as a
guide. All of representations, informations and advices within this document,
does not constitute any express or implied warranty. If there is any information of
this user manual are subject to change without notice, and don't take any
responsibility that manual errors generated or omissions caused.
【Precautions】
● In order to assure the safety, please select the power adapter appointed or
provided by our factory
● In the boot state, please do not directly pulled out power adapter in order to
avoid suddenly power off caused damage.
● Please do not move the device when it is running.
● Keep far away from high temperature or low temperature environment, try to
keep moisture proof and ventilated working environment.
● Please do not hurl, knock or shake the device, the non-professional workers do
not unpack the device without any guides. improper operating will cause damage
for device.
● Do not clean the device with harsh chemical or corrosive cleaner.
Catalogue
1 Component.............................................................................................................................4
2 Connection .............................................................................................................................6
2.1 Connect with Monitor ..........................................................................................................................6
2.2 Connect with Lan Cable .......................................................................................................................8
2.3 Connect with Mouse&Keyboard..........................................................................................................8
2.4 Connect with Mic&Speaker .................................................................................................................8
2.5 Connect with Power .............................................................................................................................8
3 Operating Instruction...........................................................................................................9
3.1 Remote Connection Settings ................................................................................................................9
3.1.1 Find A Host .................................................................................................................................9
3.1.2 Configuration & Shortcut..........................................................................................................10
3.1.3 Shutdown & IP address .............................................................................................................11
3.2 Control Panel......................................................................................................................................12
3.2.1 Network.....................................................................................................................................13
3.2.2 Display & Sound..................................................................................................................... 14
3.2.3 Peripherals & Start ....................................................................................................................15
3.2.4 Date & Time..............................................................................................................................16
3.2.5 Password ...................................................................................................................................17
3.2.6 Upgrade & Reset .......................................................................................................................18
3.2.7 Language Selection ...................................................................................................................19
3.2.8 Software & Hareware
Information.....................................................................................20
3.3 Video Display .....................................................................................................................................20
3.3.1 Setup of
player....................................................................................................................20
3.3.2 Usage of
player .................................................................................................................20
3.3.3
Button................................................................................................................................. 21
4 FAQ ......................................................................................................................................24
1
Component
Front Panel
A B C
A：TF card port
B：Nonopaque Bar
C：On/Off button
Back Panel
D E GF H I J
D：RJ45Lan port
E：Audio Output SPK Port
F：Audio Input MIC Port
G：USB Port 1; USB Port 2
H:：HDMI Port
I：VGA Port
J：5V/2A Power Port
Side Panel
K L
K: USB Port 3
L：WIFI port
2
Connection
2.1 Connect with Monitor
Pls connect LCD singal wire with VGA port of cloud computer.
Pls connect HDMI singal wire with HDMI port of cloud computer if HD display
is requested,such as HDTV.Cloud computer NL600 can support dual-screen
display.
2.2 Connect with Lan Cable
Pls connect lan cable (10～100M ) with lan port of cloud computer,and connect
opposite end with switch or router.
2.3 Connect with mouse & keyboard
Connect mouse & keyboard with cloud computer by USB 2.0 port.
2.4 Connect with Mic & Speaker
1. Connect Earphone with SPK port
2. Connect Mic with MIC port
Note: Earphone port is in green color,and Mic port is in red color.
2.5 Connect with Power
1) Plug power adapter in,the power indicator light will be green color.
3. Operating
Instruction
Cloud Computer NL600 is built-in RDP7.1 protocol,it supports 32 bit color and
1080P full screen hd video (local display). NL600 is compatible with 99% of
Windows platform application,brings users a rich windows experience.
3.1 Remote connection Settings
Plug power adapter in, the device enter boots interface.
置
Note: Pls set the resolution in control panel before remote connection,and
choose the network settings according to actual network condition.Other
functions setup according to personal requirements.
3.1.1 Find A Host
It will automatically search all HOST which has installed Shineplayer , (Pls
note that shineplayer was developed by our company must installed in the server
first.)then choose the host record by double-clicking or clicking "connect" in the
right side,to enter into the login interface.With user name,password,domain and
port info,then enter the remote system.
Note: It may show the host that are not eligible due to network delay,pls click
"refresh" in the right side or reboot the device.
3.1.2 Configuration & Shortcut
To set the related shortcut of HOST login.
Configuration：For example,HOST 1,once user input and save IP address,Host
name,Password,Port & Domain info under Configuration,it can access to the
HOST 1 by the shortcut with info above.
Auto：It will automatically enter into the HOST you choose after rebooting.
If user want to cancel or revise this AUTO function,pls disconnect remote system
then enter the “configuration” for settings.
Note: It needn’t to input domain if there is not domain in the server.
Port Info is 3389 by default. User can input the new number only when port info
is revised in the server, or it is no need.
Indice
Altri manuali Black Box Scrivania
