Black Box JPM624A Manuale utente

1000 Park Drive • Lawrence, PA 15055-1018 • 724-746-5500 • Fax 724-746-0746

Figure 3. Terminating the wire conductors.

NOTE: For best performance, keep the untwisted part of the wire less than 0.5 inches (1.3 cm)

long.

Using a punchdown tool, terminate each wire. Push the 110 punchdown tool to the edge

of the 110 connector to trim the conductors. See Figure 3.

4. Optional: Place the stuffer caps on the terminated 110 blocks for added strain relief.

5. Finally, connect the patch cord. Plug the patch cord into the patch panel, then connect it

to the network equipment.

Installation is complete.

TRADEMARKS USED IN THIS MANUAL

Black Box and the Double Diamond logo are registered trademarks of BB Technologies,

Inc.

UL is a registered trademark of Underwriters Laboratories, Inc.

All other trademarks mentioned in this manual are acknowledged to be the property of the

trademark owners.

CUSTOMER

SUPPORT

INFORMATION

Order toll-free in the U.S.: Call 877-877-BBOX (outside U.S. call 724-746-5500)

FREE technical support 24 hours a day, 7 days a week: Call 724-746-5500 or fax 724-746-0746

Mailing address: Black Box Corporation, 1000 Park Drive, Lawrence, PA 15055-1018

Web site: www.blackbox.com • E-mail: [email protected]

NOVEMBER 2008

JPM624A

JPM648A

CAT6 Patch Panels

Introduction

Use our CAT6 Patch Panels to consolidate cabling in wiring closets. These sturdy

panels meet Category 6 performance requirements, and their universal wiring

enables you to terminate each cable to either T568A or T568B wiring schemes.

Simply follow the color-coded guides on the panel; they identify the sequence of

cable pair terminations.

You should have received the following items:

• (1) CAT6 Patch Panel

• (8) or (16) cable ties

• (4) 10-32 cuphead screws

• (4) 12-24 cuphead screws

• (1) bag of stuffer caps

• This user's manual

If anything is missing or damaged, please contact Black Box at 724-746-5500.

You will also need a punchdown tool to terminate the horizontal cable to the patch

panel. The punchdown tool is not included with your patch panel.

Specifications

Standards: T568A and T568B

Connectors: JPM624A: (24) RJ-45, (24) 4-pair 110 punchdown;

JPM648A: (48) RJ-45, (48) 4-pair 110 punchdown

Electrical: Insulation Resistance: 500 MΩ;

Dielectric Withstanding Voltage: 1000V;

DC Current Rating: 1.5 Amps;

DC Resistance: 0.1 Ω;

Contact Resistance: 20 mΩ

CAT6 Patch Panels

Material: High-impact UL®94V-2 resin;

Spring wire: Phosphor bronze 5100W temper wire,

50-microinch gold over 100-microinch nickel undercoat;

IDC plastic: High-impact UL®94V-2 resin;

IDC contact: Phosphor bronze tin over 60-microinch nickel

undercoat

Physical Characteristics: Insertion life: 750 mating cycles with FCC-

compliant RJ-45 plug;

IDC durability: 200 termination cycles;

Contact compatibility: Accommodates 22-24 AWG solid;

Operating temperature range: +14 to +140˚F (-10 to +60˚C)

Storage temperature range: -40 to +154˚F (-40 to 68˚C)

Humidity: 10% – 90%, relative

Size: JPM624A: 1.75"H (1U) x 19"W x 1.4"D (4.4 x 48.3 x 3.6 cm);

JPM648A: 3.5"H (2U) x 19"W x 1.4"D (8.9 x 48.3 x 3.6 cm)

Weight: JPM624A: 1.4 lb. (0.6 kg);

JPM628A: 2.5 lb. (1.1 kg)

Installation

1. Use the correct set of supplied screws on each of the four corners of the patch panel

and tighten them securely. If necessary, use a screwdriver to tighten each screw.

2. Prepare the cable by stripping about 2 inches (5.1 cm) of the cable jacket. Be careful

not to damage the twisted wire!

3. Next, punch down the cable. Place each wire pair next to the appropriate wiring color/

label. Refer to Figures 1 and 2 for T568A and T568B color codes.

Figure 1. Color codes on

the T568A side of the

wiring label.

Figure 2. Color codes on

the T568B side of the

wiring label

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali Black Box Hardware di rete

Black Box

Black Box JPM083A Manuale utente

Black Box

Black Box 39625 Manuale utente

Black Box

Black Box ServSwitch KV1081A Manuale utente

Black Box

Black Box MT910A Manuale utente

Black Box

Black Box LT2060A Manuale utente

Black Box

Black Box SW551A Manuale utente

Black Box

Black Box InvisaPC DTX1000-T Manuale utente

Black Box

Black Box 525056 Manuale di istruzioni

Black Box

Black Box Lineshare Pro AC FX150A Manuale utente

Black Box

Black Box TS580A-R4 Manuale utente

Black Box

Black Box TL482A-R3 Manuale utente

Black Box

Black Box IC111C Manuale utente

Black Box

Black Box AC504A Manuale utente

Black Box

Black Box JPM440A Manuale utente

Black Box

Black Box COE-8I Manuale utente

Black Box

Black Box Veri-NAC Manuale

Black Box

Black Box LT0009A Manuale utente

Black Box

Black Box LWS100AE Manuale utente

Black Box

Black Box EME149A-20 Manuale utente

Black Box

Black Box CSU/DSU Manuale utente

Black Box

Black Box MT619A-ST-R2 Manuale utente

Black Box

Black Box MT1500A Manuale utente

Black Box

Black Box LB410A Manuale utente

Black Box

Black Box LT0009A Manuale utente

Manuali Hardware di rete popolari di altre marche

Matrix Switch Corporation

Matrix Switch Corporation MSC-HD161DEL Manuale utente

B&B Electronics

B&B Electronics ZXT9-IO-222R2 Manuale utente

Yudor

Yudor YDS-16 Manuale utente

D-Link

D-Link ShareCenter DNS-320L Manuale utente

Samsung

Samsung ES1642dc Istruzioni per l’uso

Honeywell Home

Honeywell Home LTEM-PV Istruzioni per il montaggio

evertz

evertz 7700 Series Manuale utente

D-Link

D-Link ShareCenter DNS-343 Manuale utente

Asante

Asante AsanteBridge 1012 Manuale utente

FireBrick

FireBrick FB2700 Manuale utente

Audiovox Electronics

Audiovox Electronics ARWH2T Manuale utente

ADC

ADC DSX-1 Manuale

NetComm

NetComm NF2 Manuale utente

Alcatel-Lucent

Alcatel-Lucent 5620 Manuale utente

Dell EMC

Dell EMC XC6420 Series Manuale utente

Lanner

Lanner NCA-1020A Manuale utente

Allied Telesis

Allied Telesis AT-TN121-A Manuale utente

Arista

Arista CCA-ETM-Q12 Manuale utente