Black Box JPM806A-HD Manuale utente

BL A C K B OX®

Provide patching without punching down the

wires to the ports.

Meet CAT5e specifications.

Install in relay racks or communications cabinets.

Category 5e High-Density Feed-Through Patch Panels

Order toll-free in the U.S.: Call 877-877-BBOX (outside U.S. call 724-746-5500) •

FREE technical support 24 hours a day, 7 days a week: Call 724-746-5500 or fax 724-746-0746 •

Mailing address: Black Box Corporation, 1000 Park Drive, Lawrence, PA 15055-1018 •

Web site: www.blackbox.com • E-mail: info@blackbox.com

Customer

Support

Information

April 2010

JPM806A-HD

JPM810A-HD

724-746-5500 | blackbox.com

Page 2

Category 5e High-Density Feed-Through Patch Panels

Trademarks Used in this Manual

Black Box and the Double Diamond logo are registered trademarks of BB Technologies, Inc.

Any other trademarks mentioned in this manual are acknowledged to be the property of the trademark owners.

1. Specifications

Standards: TIA/EIA 568B.2, Category 5e

Connectors: JPM806A-HD: (48) shielded RJ-45 on front; (48) shielded RJ-45 on back;

JPM810A-HD: (48) unshielded RJ-45 on front; (48) unshielded RJ-45 on back

Size: Panel including cable management: 1.75"H (1U) x 19"W x 6"D (4.4 x 48.3 x 15.3 cm)

Weight: JPM806A-HD: 3.8 lb. (1.7 kg);

JPM810A-HD: 3.3 lb. (1.5 kg)

2. Overview

The Category 5e High-Density Feed-Through Patch Panels meet Category 5e performance requirements and provide patching

without punching down the wires to the ports. These sturdy panels install in relay racks or communications cabinets.

Your package should include the following items. If anything is missing or damaged, please contact Black Box at 724-746-5500.

• (1) Category 5e High-Density Feed-Through Patch Panel

• (4) 10-32 cuphead screws

• (4) 12-24 cuphead screws

• (8) cable ties

• (4) drain wires (with shielded panel [JPM806A-HD] only)

• (8) station ID labels

3. Installation

Use the High-Density Feed-Through Patch Panels in relay racks. They neatly organize and support the data cables you’ve installed

in the rear of the patch panel.

Follow these steps to install the patch panel in a relay rack or communications cabinet:

1. Find an empty rack space.

2. Install the panel with the supplied 10-32 or 12-24 cuphead screws.

3. Install the RJ-45 patch cables on the front and rear connectors. Make sure the rear patch cables are resting on the cable

management bar.

724-746-5500 | blackbox.com

Page 3

Category 5e High-Density Feed-Through Patch Panels

We‘re here to help! If you have any questions about your application

or our products, contact Black Box Tech Support at 724-746-5500

or go to blackbox.com and click on “Talk to Black Box.”

You’ll be live with one of our technical experts in less than 20 seconds.

4. When using the shielded High-Density Feed-Through Patch Panels, make sure to attach the necessary drain wires. Use one

drain wire for each shielded module on the patch panel. Attach the drain wire in either of the two places as shown in Figure

3-1. Connect the other end of the drain wire to proper ground.

Figure 3-1. Drain wire installation options for shielded models.

5. Use cable ties to secure the cables to the cable management bar. See Figure 3-2.

Figure 3-2. Completed installation.

Lower right view

Top left view

724-746-5500 | blackbox.com

About Black Box

Black Box Network Services is your source for more than 118,000 networking and infrastructure products. You’ll find everything

from cabinets and racks and power and surge protection products to media converters and Ethernet switches all supported by

free, live 24/7 Tech support available in 20 seconds or less.

BLACK BOX®

Black Box Tech Support: FREE! Live. 24/7.

Tech support the

way it should be.

Great tech support is just 20 seconds away at 724-746-5500 or blackbox.com.

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali Black Box Hardware di rete

Black Box

Black Box ACR2004A Manuale utente

Black Box

Black Box ServSwitch KV754A Manuale utente

Black Box

Black Box V.35 FOLD-ST Series Manuale utente

Black Box

Black Box 5000 series Manuale utente

Black Box

Black Box SW549A Manuale utente

Black Box

Black Box MT619A-ST-R2 Manuale utente

Black Box

Black Box LD485A-MP Manuale utente

Black Box

Black Box IC457A-F Manuale utente

Black Box

Black Box AC431A Manuale utente

Black Box

Black Box LT2060A Manuale utente

Black Box

Black Box FOM Line Driver-ST Manuale utente

Black Box

Black Box COMPACT T1 Manuale utente

Black Box

Black Box Veri-NAC Manuale

Black Box

Black Box JPM5E24A-HU Manuale utente

Black Box

Black Box ACR2005A Manuale utente

Black Box

Black Box LB0010A-A24-R2 Manuale utente

Black Box

Black Box EME1DC16 Manuale utente

Black Box

Black Box 38891 Manuale utente

Black Box

Black Box TS580A-R4 Manuale utente

Black Box

Black Box JPM260 Manuale utente

Black Box

Black Box MX325A-HS Manuale utente

Black Box

Black Box Time-Division Multiplexor Manuale utente

Black Box

Black Box RADIAN 1000 Series Manuale utente

Black Box

Black Box RM425A-R3 Manuale utente

Manuali Hardware di rete popolari di altre marche

Matrix Switch Corporation

Matrix Switch Corporation MSC-HD161DEL Manuale utente

B&B Electronics

B&B Electronics ZXT9-IO-222R2 Manuale utente

Yudor

Yudor YDS-16 Manuale utente

D-Link

D-Link ShareCenter DNS-320L Manuale utente

Samsung

Samsung ES1642dc Istruzioni per l’uso

Honeywell Home

Honeywell Home LTEM-PV Istruzioni per il montaggio

evertz

evertz 7700 Series Manuale utente

D-Link

D-Link ShareCenter DNS-343 Manuale utente

Asante

Asante AsanteBridge 1012 Manuale utente

FireBrick

FireBrick FB2700 Manuale utente

Audiovox Electronics

Audiovox Electronics ARWH2T Manuale utente

ADC

ADC DSX-1 Manuale

NetComm

NetComm NF2 Manuale utente

Alcatel-Lucent

Alcatel-Lucent 5620 Manuale utente

Dell EMC

Dell EMC XC6420 Series Manuale utente

Lanner

Lanner NCA-1020A Manuale utente

Allied Telesis

Allied Telesis AT-TN121-A Manuale utente

Arista

Arista CCA-ETM-Q12 Manuale utente