Black Box FX800A Manuale utente

CUSTOMER

SUPPORT

INFORMATION

Order toll-free in the U.S. 24 hours, 7 A.M. Monday to midnight Friday: 877-877-BBOX

FREE technical support, 24 hours a day, 7 days a week: Call 724-746-5500 or fax 724-746-0746

Mail order: Black Box Corporation, 1000 Park Drive, Lawrence, PA 15055-1018

Web site: www.blackbox.com • E-mail: [email protected]

SEPTEMBER 1996

FX800A

FX800AE

FX801A

FX802A

FX810A

FX810AE

Campus Pager

TRANSMIT

CANCEL

ALL

A/C

123

456

789

MESSAGE CODES

FCC STATEMENT

FEDERAL COMMUNICATIONS COMMISSION

and INDUSTRY CANADA

RADIO FREQUENCY INTERFERENCE STATEMENT

Class B Digital Device. This equipment has been tested and found to comply with the

limits for a Class B computing device pursuant to Part 15 of the FCC Rules. These

limits are designed to provide reasonable protection against harmful interference in a

residential installation. However, there is no guarantee that interference will not occur

in a particular installation. This equipment generates, uses, and can radiate radio

frequency energy, and, if not installed and used in accordance with the instructions,

may cause harmful interference to radio communications. If this equipment does

cause harmful interference to radio or telephone reception, which can be determined

by turning the equipment off and on, the user is encouraged to try to correct the

interference by one of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which

the receiver is connected.

• Consult an experienced radio/TV technician for help.

Caution:

Changes or modifications not expressly approved by the party

responsible for compliance could void the user’s authority to operate the

equipment.

To meet FCC requirements, shielded cables and power cords are required to connect

this device to a personal computer or other Class B certified device.

This digital apparatus does not exceed the Class B limits for radio noise emission from

digital apparatus set out in the Radio Interference Regulation of Industry Canada .

Le présent appareil numérique n’émet pas de bruits radioélectriques dépassant les limites

applicables aux appareils numériques de classe B prescrites dans le Règlement sur le brouillage

radioélectrique publié par Industrie Canada.

CAMPUS PAGER

NORMAS OFICIALES MEXICANAS (NOM)

ELECTRICAL SAFETY STATEMENT

INSTRUCCIONES DE SEGURIDAD

1. Todas las instrucciones de seguridad y operación deberán ser leídas antes

de que el aparato eléctrico sea operado.

2. Las instrucciones de seguridad y operación deberán ser guardadas para

referencia futura.

3. Todas las advertencias en el aparato eléctrico y en sus instrucciones de

operación deben ser respetadas.

4. Todas las instrucciones de operación y uso deben ser seguidas.

5. El aparato eléctrico no deberá ser usado cerca del agua—por ejemplo,

cerca de la tina de baño, lavabo, sótano mojado o cerca de una alberca,

etc..

6. El aparato eléctrico debe ser usado únicamente con carritos o pedestales

que sean recomendados por el fabricante.

7. El aparato eléctrico debe ser montado a la pared o al techo sólo como

sea recomendado por el fabricante.

8. Servicio—El usuario no debe intentar dar servicio al equipo eléctrico más

allá a lo descrito en las instrucciones de operación. Todo otro servicio

deberá ser referido a personal de servicio calificado.

9. El aparato eléctrico debe ser situado de tal manera que su posición no

interfiera su uso. La colocación del aparato eléctrico sobre una cama,

sofá, alfombra o superficie similar puede bloquea la ventilación, no se

debe colocar en libreros o gabinetes que impidan el flujo de aire por los

orificios de ventilación.

10. El equipo eléctrico deber ser situado fuera del alcance de fuentes de

calor como radiadores, registros de calor, estufas u otros aparatos

(incluyendo amplificadores) que producen calor.

NOM STATEMENT

11. El aparato eléctrico deberá ser connectado a una fuente de poder sólo

del tipo descrito en el instructivo de operación, o como se indique en el

aparato.

12. Precaución debe ser tomada de tal manera que la tierra fisica y la

polarización del equipo no sea eliminada.

13. Los cables de la fuente de poder deben ser guiados de tal manera que no

sean pisados ni pellizcados por objetos colocados sobre o contra ellos,

poniendo particular atención a los contactos y receptáculos donde salen

del aparato.

14. El equipo eléctrico debe ser limpiado únicamente de acuerdo a las

recomendaciones del fabricante.

15. En caso de existir, una antena externa deberá ser localizada lejos de las

lineas de energia.

16. El cable de corriente deberá ser desconectado del cuando el equipo no

sea usado por un largo periodo de tiempo.

17. Cuidado debe ser tomado de tal manera que objectos liquidos no sean

derramados sobre la cubierta u orificios de ventilación.

18. Servicio por personal calificado deberá ser provisto cuando:

A: El cable de poder o el contacto ha sido dañado; u

B: Objectos han caído o líquido ha sido derramado dentro del

aparato; o

C: El aparato ha sido expuesto a la lluvia; o

D: El aparato parece no operar normalmente o muestra un cambio en

su desempeño; o

E: El aparato ha sido tirado o su cubierta ha sido dañada.

CAMPUS PAGER

TRADEMARKS

All applied-for and registered trademarks are the property of their respective

owners.

CAMPUS PAGER

CONTENTS

1. Specifications .................................................................................6

2. Important Notes.............................................................................7

3. Introduction...................................................................................8

3.1 Overview ................................................................................8

3.1.1 Unpacking the Campus Pager (Base Unit and

Two Pagers)................................................................8

3.1.2 Unpacking the Campus Pager (FX810A) .................8

3.2 Tone Pager (FX801A) ........................................................10

Unpacking the FX801A......................................................10

3.3 Vibrating/Tone Pager (FX802A) ......................................11

Unpacking the FX802A......................................................11

4. Installation ...................................................................................12

4.1 Positioning the Campus Pager...........................................12

4.2 Positioning the Antenna Ground Wire .............................14

4.3 Connecting Power to the Campus Pager ..........................14

4.4 Installing/Replacing Pager Batteries.................................15

5. Using the Campus Pager.............................................................17

5.1 Overview ..............................................................................17

5.2 Storing the System Code ....................................................17

5.3 Storing the Pager Code ......................................................19

5.4 Transmitting a Message Code to a Single Pager...............20

5.5 Transmitting a Message Code to All System Pagers .........21

5.6 Receiving a Message Code with the Tone Pager...............22

5.7 Receiving a Message Code with the Vibrating/Tone

Pager....................................................................................22

5.8 Reviewing Stored Message Codes ......................................22

6. Service Information.....................................................................23

CAMPUS PAGER

1. Specifications

Operating Voltage — 120 VAC, 60 Hz

Transmitting Frequency — 27.255 MHz

System Codes — 1000 combinations

Transmitting Range — Up to 2 miles (3.2 km)

Pagers Supported — 100

RF Transmitting Power — 7 watts

Message Code Numbers — 10 (0-9)

Antenna Connection — UHF/RF connector

Power — FX810A: 120 VAC, 60 Hz;

FX810AE: 230 VAC, 50 Hz;

FX801A, FX802A: 2 AAA batteries (not included)

Size — FX810A: 3”H x 10”W x 8.5”D (7.6 x 25.4 x 21.6 cm);

FX801A, FX802A: 3.5”H x 2.5”W x 1”D (8.9 x 6.4 x 2.5 cm)

Weight — FX810A: 5.5 lb. (2.5 kg);

FX801A, FX802A: <0.1 lb. (<0.1 kg)

CAMPUS PAGER

2. Important Notes

We recommend that you use a surge protector with all electronic devices. Use

a surge suppressor on the input power supply of the Campus Pager.

WARNING

BEWARE OF ELECTRIC SHOCK!!!

You might be shocked if you remove the cover or back of the Campus

Pager. THERE ARE NO USER-SERVICEABLE PARTS INSIDE! If you have

problems with your Campus Pager, call for technical support.

WARNING

You might cause a fire if you expose the Campus Pager to rain or

moisture! Keep the unit in a clean, dry environment.

To reduce the risk of fire, do not set the Campus Pager on any heating or

cooking appliance.

CAMPUS PAGER

3. Introduction

3.1 Campus Pager

The Campus Pager is a wireless, in-house paging system that alerts you to

important messages through its individual system pagers. One model

(FX800A) is available with included pagers (FX801A), and another model

(FX810A) works with pagers that you order separately (FX801A, FX802A).

3.1.1 U

NPACKING THE

AMPUS

AGER

ASE

NIT AND

AGERS

)

The Campus Pager package (FX800A) includes the following items:

The Campus Pager package includes the following items:

• (1) Campus Pager base unit

• (1) antenna

• (2) wall-mount brackets

• (2) screws

• (2) Tone Pagers (FX801A)

• This User’s Manual

3.1.2 U

NPACKING THE

AMPUS

AGER

(FX810A)

The Campus Pager (FX810A) includes the following items:

• (1) Campus Pager

• (1) Base Unit

• This User’s Manual

You must order the pagers separately to work with the FX810A. Choose

from either the Tone Pager (FX801A) or the Vibrating/Tone Pager

(FX802A). See Sections 3.2 and 3.3 for more information about these pagers.

CAMPUS PAGER

Figure 3-1. Campus Pager.

You can use the Campus Pager in a variety of applications, in any

environment in which you need unlimited/direct paging. The Pager has a

transmission range of up to 2 miles (3.2 km).

• restaurants

• hospitals

• factories

• hotels

• apartment complexes

• construction sites

• offices

• retail outlets

• residential properties

• campgrounds

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali Black Box Cercapersone

Black Box

Black Box FX810A-R2 Manuale utente

Manuali Cercapersone popolari di altre marche

Alpha

Alpha Elite Manuale utente

LRS

LRS RX-E467 Manuale utente

Bellman & Symfon

Bellman & Symfon Visit BE1470 Manuale utente

unication

unication E3 Manuale utente

Infostream

Infostream X5 Istruzioni per il montaggio

Motorola

Motorola BR850 Manuale utente

ACE TELECOM

ACE TELECOM ACE-2040 Manuale utente

Intek

Intek Allure Manuale utente

Pocsag

Pocsag PG-2092P Manuale utente

Motorola

Motorola Bravo classic Manuale utente

Motorola

Motorola LS750 Manuale utente

Alert Systems

Alert Systems HyperGuard MP10D Manuale utente

Motorola

Motorola Talkabout T900 Manuale utente

Motorola

Motorola Advisor Graphix CP1250 Manuale utente

Radio Shack

Radio Shack 17-7040 Manuale utente

PageOne

PageOne Advisor Graphix Manuale utente

Syscall

Syscall Nttworks GP-210RT Manuale utente

unication

unication G4 Manuale utente