Black Box Remote Power Manager 16 Manuale utente
1000 Park Drive • Lawrence, PA 15055-1018 • 724-746-5500 • Fax 724-746-0746
© Copyright 2005. Black Box Corporation. All rights reserved.
CUSTOMER
SUPPORT
INFORMATION
Order toll-free in the U.S.: Call 877-877-BBOX (outside U.S. call 724-746-5500)
FREE technical support 24 hours a day, 7 days a week: Call 724-746-5500 or fax 724-746-0746
Mailing address: Black Box Corporation, 1000 Park Drive, Lawrence, PA 15055-1018
DECEMBER 2005
PS565A
PS565AE
PS567A
PS584A
Remote Power Manager
Remote Power Manager 16
Quick Start Guide
1
REMOTE POWER MANAGER QUICK START GUIDE
FEDERAL COMMUNICATIONS COMMISSION
AND
INDUSTRY CANADA
RADIO FREQUENCY INTERFERENCE STATEMENTS
This equipment generates, uses, and can radiate radio-frequency energy, and if not
installed and used properly, that is, in strict accordance with the manufacturer’s
instructions, may cause interference to radio communication. It has been tested
and found to comply with the limits for a Class A computing device in accordance
with the specifications in Subpart B of Part 15 of FCC rules, which are designed to
provide reasonable protection against such interference when the equipment is
operated in a commercial environment. Operation of this equipment in a
residential area is likely to cause interference, in which case the user at his own
expense will be required to take whatever measures may be necessary to correct
the interference.
Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
This digital apparatus does not exceed the Class A limits for radio noise emission from
digital apparatus set out in the Radio Interference Regulation of Industry Canada.
Le présent appareil numérique n’émet pas de bruits radioélectriques dépassant les limites
applicables aux appareils numériques de la classe A prescrites dans le Règlement sur le
brouillage radioélectrique publié par Industrie Canada.
EUROPEAN UNION DECLARATION OF CONFORMITY
This equipment complies with the requirements of the European EMC Directive
89/336/EEC.
2
REMOTE POWER MANAGER QUICK START GUIDE
NORMAS OFICIALES MEXICANAS (NOM)
ELECTRICAL SAFETY STATEMENT
INSTRUCCIONES DE SEGURIDAD
1. Todas las instrucciones de seguridad y operación deberán ser leídas antes de
que el aparato eléctrico sea operado.
2. Las instrucciones de seguridad y operación deberán ser guardadas para
referencia futura.
3. Todas las advertencias en el aparato eléctrico y en sus instrucciones de
operación deben ser respetadas.
4. Todas las instrucciones de operación y uso deben ser seguidas.
5. El aparato eléctrico no deberá ser usado cerca del agua—por ejemplo, cerca
de la tina de baño, lavabo, sótano mojado o cerca de una alberca, etc..
6. El aparato eléctrico debe ser usado únicamente con carritos o pedestales que
sean recomendados por el fabricante.
7. El aparato eléctrico debe ser montado a la pared o al techo sólo como sea
recomendado por el fabricante.
8. Servicio—El usuario no debe intentar dar servicio al equipo eléctrico más allá
a lo descrito en las instrucciones de operación. Todo otro servicio deberá ser
referido a personal de servicio calificado.
9. El aparato eléctrico debe ser situado de tal manera que su posición no
interfiera su uso. La colocación del aparato eléctrico sobre una cama, sofá,
alfombra o superficie similar puede bloquea la ventilación, no se debe colocar
en libreros o gabinetes que impidan el flujo de aire por los orificios de
ventilación.
10. El equipo eléctrico deber ser situado fuera del alcance de fuentes de calor
como radiadores, registros de calor, estufas u otros aparatos (incluyendo
amplificadores) que producen calor.
11. El aparato eléctrico deberá ser connectado a una fuente de poder sólo del
tipo descrito en el instructivo de operación, o como se indique en el aparato.
3
REMOTE POWER MANAGER QUICK START GUIDE
12. Precaución debe ser tomada de tal manera que la tierra fisica y la polarización
del equipo no sea eliminada.
13. Los cables de la fuente de poder deben ser guiados de tal manera que no
sean pisados ni pellizcados por objetos colocados sobre o contra ellos,
poniendo particular atención a los contactos y receptáculos donde salen del
aparato.
14. El equipo eléctrico debe ser limpiado únicamente de acuerdo a las
recomendaciones del fabricante.
15. En caso de existir, una antena externa deberá ser localizada lejos de las lineas
de energia.
16. El cable de corriente deberá ser desconectado del cuando el equipo no sea
usado por un largo periodo de tiempo.
17. Cuidado debe ser tomado de tal manera que objectos liquidos no sean
derramados sobre la cubierta u orificios de ventilación.
18. Servicio por personal calificado deberá ser provisto cuando:
A: El cable de poder o el contacto ha sido dañado; u
B: Objectos han caído o líquido ha sido derramado dentro del aparato; o
C: El aparato ha sido expuesto a la lluvia; o
D: El aparato parece no operar normalmente o muestra un cambio en su
desempeño; o
E: El aparato ha sido tirado o su cubierta ha sido dañada.
4
REMOTE POWER MANAGER QUICK START GUIDE
TRADEMARKS USED IN THIS MANUAL
BLACK BOX and the Double Diamond logo are registered trademarks of BB
Technologies, Inc.
AT is a registered trademark of International Business Machines Corporation.
JavaScript is a registered trademark of Sun Microsystems, Inc.
Telnet is a trademark of Telnet Communications, Inc.
Any other trademarks mentioned in this manual are acknowledged to be the property of the
trademark owners.
5
REMOTE POWER MANAGER QUICK START GUIDE
WARNINGS AND CAUTIONS
Secure Racking
If secure racked units are installed in a closed or multi-unit rack
assembly, they may require further evaluation by certification agencies.
Consider the following items:
1. The ambient temperature within the rack may be greater than the
room ambient temperature. Installation should be such that the
amount of airflow required for safe operation is not compromised.
The maximum temperature for the equipment in this environment is
122°F (50°C).
2. Install the unit so that it doesn’t become unstable from uneven
loading.
Input Supply
Check nameplate ratings to ensure that there is no overloading of
supply circuits that could have an effect on overcurrent protection and
supply wiring.
Grounding
Maintain reliable grounding of this equipment. Give particular attention
to supply connections when connecting to power strips, rather than
direct connections to the branch circuit.
Shock Hazard
Do not attempt to repair or service this device yourself. Internal
components must be serviced by authorized personnel only.
Disconnect Power
If any of the following events occurs, immediately disconnect the unit
from the outlet and contact Black Box at 724-746-5500.
1. The power cord is frayed or damaged.
2. Liquid has been spilled into the device or the device has been
exposed to rain or water.
Disconnect the Power Supply Cable(s)
The PS565A and PS565AE include one power supply cable. The PS567A
and PS584A include two separate power circuits with a power supply
cable for each circuit. Before attempting to service or remove this unit,
make certain that the power cable (for PS565A or PS565AE) or both
power cables (for PS567A or PS584A) are disconnected.
6
REMOTE POWER MANAGER QUICK START GUIDE
Quick Start Guide
To take full advantage of the complete range of features that the Remote Power
Manager offers, we recommend that you read the user’s manual (it’s in PDF
format on the included CD-ROM) after performing this quick start procedure.
Hardware Description
Four models are available. The PS565A Remote Power Manager features a
115-VAC power inlet and five 115-VAC NEMA 5-15R outlets. The second version
(PS565AE) has a 105- to 240-VAC power inlet and five 230-VAC IEC 320-C13
outlets. The PS567A Remote Power Manager 16 uses two 115-VAC power inlets and
16 115-VAC NEMA 5-15R outlets. The PS584A Remote Power Manager 16 uses two
105- to 240-VAC power inlets and 16 230-VAC IEC 320-C13 outlets.
Figures 1 (for PS565A) or 2 (for PS567A) correspond to the Remote Power
Manager’s or Remote Power Manager 16’s components. The numbers in the
illustrations correspond to the descriptions that follow.
Figure 1. The Remote Power Manager’s components (PS565A shown).
➀
➁
➂
➃
➄
➅
➆
➇
➈
7
REMOTE POWER MANAGER QUICK START GUIDE
➀Manual switch button: A control button for the Remote Power Manager’s
switched plugs. To manually switch the plugs “On” or “Off,” press and hold
the button for one second.
NOTE
Section 5.3.1 in the user’s manual describes how to disable the manual
switch button.
➁Ready indicator: This LED flashes when the Remote Power Manager is ready
to receive commands.
➂Activity indicator: This LED flashes to indicate activity at the network port.
➃Network port: Use this RJ-45 Ethernet port to connect to your TCP/IP
network. The default IP address is 192.168.168.168. For more information,
please refer to Section 5.3.4 in the user’s manual.
➄COM/RS-232 port: This DB9 COM/RS-232 serial port (DTE) is used for
connecting to a local terminal or external modem, as described in Section 4.3
in the user’s manual.
➅Switched plugs and plug indicators: Five 3-prong 115-VAC NEMA 5-15R
outlets (for the PS565A) switch a total of up to 15 amps. Five 230-VAC
IEC 320-C13 outlets (for the PS565AE) switch a total of up to 10 amps.
➆Master power switch: This switch must be “On” for the Remote Power
Manager to function. You cannot use this switch to set the switched outlets’
on/off status.
➇Power inlet: This IEC-320, 115-VAC inlet (PS565A) or 105- to 240-VAC inlet
(PS565AE) supplies power for the Remote Power Manager’s command
functions and the switched plug. It includes a cable keeper (not shown).
➈Circuit breaker: 115 VAC, 15 amps (PS565A) or 240 VAC, 10 amps
(PS565AE).
➉Rackmounting brackets (not shown): These brackets are used for mounting
the Remote Power Manager in your equipment rack.
Questo manuale è adatto per i seguenti modelli
5
Indice
Altri manuali Black Box Unità di distribuzione dell'energia
Black Box
Black Box APC Switched Rack PDU Manuale utente
Black Box
Black Box Power View PS570A Manuale utente
Black Box
Black Box ACR1000-CPH8R Manuale utente
Black Box
Black Box PSE505 Series Manuale utente
Black Box
Black Box Power View PS570A Manuale utente
Black Box
Black Box ACR1000-CPH8R-R2 Manuale utente
Black Box
Black Box PDUMH14-S15-120V Manuale utente
Black Box
Black Box Remote Power Manager Manuale utente
Black Box
Black Box CARTTIMER1 Manuale utente
Black Box
Black Box PSE544-DE-R2 Manuale utente
