BLACK DECKER BDT20WTB Manuale utente

INSTRUCTION MANUAL

PORTABLE DEHUMIDIFIER

Thank you for choosing BLACK+DECKER!

PLEASE READ BEFORE RETURNING THIS PRODUCT FOR

ANY REASON.

If you have a question or experience a problem with your BLACK+DECKER

purchase, go to www.blackanddecker.com/instantanswers

If you can’t find the answer or do not have access to the Internet, call

844-299-0879 from 10:30 a.m. to 6:30 p.m. EST Mon. - Fri. to speak with an

agent. Please have the catalog number available when you call.

SAVE THIS MANUAL FOR FUTURE REFERENCE.

CATALOG NUMBER

BDT20WTB

BDT30WTB

BDT40WTB

BDT50WTB

BDT50PWTB

Page 2

Thank you for purchasing our

BLACK+DECKER product. This

easy-to-use manual will guide you

in getting the best use of your

portable dehumidier.

Remember to record the model

and serial numbers. They are on a

label on the rear.

Staple your receipt to your manual.

You will need it to obtain warranty service.

Model number

Serial number

Date of purchase

PRODUCT REGISTRATION

CONTENTS

SAFETY INFORMATION

Important Safety Instructions..........................................................................................................................................3-4

Grounding Instructions.........................................................................................................................................................4

Safety Guidelines ....................................................................................................................................................4

Power Cord Operation..........................................................................................................................................4

SET UP & USE

Parts & Features ....................................................................................................................................................................... 5

Control Panel............................................................................................................................................................6

Installation Guide .................................................................................................................................................... 7

Before First Operation.......................................................................................................................................... 8

Operation Instructions.................................................................................................................................... 9-14

Specications ..........................................................................................................................................................15

CLEANING & CARE..............................................................................................................................................16

TROUBLE SHOOTING & WARRANTY

Before You Call For Service...............................................................................................................................17

Customer Service...................................................................................................................................................17

Troubleshooting ...............................................................................................................................................18-19

Limited Warranty.................................................................................................................................................................. 20

Page 3

SAFETY INFORMATION

IMPORTANT SAFETY INSTRUCTIONS

1. Always place the unit on a level surface strong enough to support

the unit with a full bucket of water

2. Never use or store gasoline or other ammable vapor or liquid near

this unit

3. Minimum installation clearance: 11.8 inches around the unit and 17.7

inches above the unit. Do not block or cover air inlet or outlet grills.

4. The unit must be connected to a correctly grounded power supply.

5. Do not start or stop the unit by inserting or pulling out the power

plug.

6. Do not use an adapter plug or extension cord.

7. Do not use the unit in the immediate surroundings of a bath, a

shower, swimming pool or clothes dryer.

8. Do not insert anything into the air outlet.

9. If the supply cord is damaged, it must be replaced by the

manufacturer, its service agent or similar qualied person in order to

avoid a hazard.

10. When cleaning the unit, always turn the unit off and unplug the

power cord.

11. Do not use outdoors. Intended for indoor use only.

12. Place the dehumidier in an area where the temperature will not fall

below 41˚ Fahrenheit. The coils can become covered with frost if the

room temperature is too low, which may reduce performance.

13. The appliance shall be installed in accordance with national wiring

regulations.

14. The appliance is not intended for use by persons (including children)

with reduced physical, sensory or mental capabilities, or lack of

experience and knowledge, unless they have been given supervision

or instruction concerning use of the appliance by a person

responsible for their safety.

SAVE THESE INSTRUCTIONS

HOUSEHOLD USE ONLY

WARNING

WARNING - Hazards or unsafe

practices which COULD result in

severe personal injury or death

DANGER

DANGER - Immediate hazards

which WILL result in severe

personal injury or death

CAUTION

CAUTION - Hazards or unsafe

practices which COULD result in

minor personal injury

WARNING

When using electrical appliances, basic safety precautions

should be followed, including the following

Page 4

SAFETY INFORMATION

GROUNDING INSTRUCTIONS

ELECTRICAL REQUIREMENTS

The electrical requirements are a 115 volt 60 Hz, dehumidier only, 15 amp. It is

recommended that a separate circuit serving only the product be provided. The

product is equipped with a 3-wire cord having a 3-prong grounding plug. It must

be plugged into a wall receptacle that is properly installed and grounded.

This appliance must be grounded. In the event of an electrical short circuit,

grounding reduces risk of electric shock by providing an escape wire for the

electric current. The cord provided with this appliance is equipped with a

grounding wire and a grounding plug. The plug must be plugged into an outlet

that is properly installed and grounded.

Avoid the use of three prong adapters or cutting off the third grounding prong

in order to accommodate a two prong outlet. This is a dangerous practice since

it provides no effective grounding for the air conditioner and may result in shock

hazard.

Consult a qualied electrician or serviceman if:

1) The grounding instructions are not completely understood.

2) You are unsure that the appliance is properly grounded.

3) You have any questions about the grounding or electrical instructions.

POWER SUPPLY CORD

1. Avoid the use of an extension cord because of potential safety hazards under

certain conditions. Have a qualied electrician or serviceman to install an

outlet near the appliance.

2. If it is absolutely necessary to use longer cord sets or an extension cord,

extreme care must be exercised.

a) Use only a grounding type 3-wire extension cord that has a 3-blade

grounding plug and a 3-slot receptacle that will accept the plug on the

appliance.

b) The marked electrical rating of the cord set or extension cord must equal

to or greater than the electrical rating of the appliance. The longer cord

should be arranged so that it will not drape over the counter top or table

top where it can be pulled on by children or tripped over unintentionally.

NOTE: Neither BLACK+DECKER nor the dealer can accept any liability for damage to the

product or personal injury resulting from failure to observe the electrical connection

procedures.

WARNING

Improper use of the grounding plug can result in a risk

of electric shock.

Page 5

PARTS & FEATURES

Control Panel & Digital Display

Air Outlet

Water Collection Bucket

Water Level Indicator

Castors (4)

Handle

SET UP & USE

Drain Plug

Filter

Continuous Drain Kit

Additional Pump Drain Kit

(Model BDT50PWTB Only)

Drain Hose

Pump Drain Hose (16.4 ft)

Drain Adapter & Gasket

Pump Adapter & Gasket

Page 6

CONTROL PANEL

Clean Filter

LED Indicator

Timer ON

LED Indicator

Pump LED

Indicator (Model

BDT50PWTB)

SET UP & USE

High Fan Speed

LED Indicator

Continuous

Drain LED

Indicator

Digital

Humidistat

Display

Filter

Button

Fan

Speed

Button

Pump Button

(Model

BDT50PWTB)

Timer Button

Increase Room

Humidity Level Decrease Room

Humidity Level

Power Button

ERROR CODES: (Will appear in the digital humidistat display)

E1: The temperature sensor on the discharge pipe may be faulty and may need to

be changed.

E2: The temperature sensor on the heat exchanger may be faulty and may need

to be changed.

E3: If the E3 error code is shown on the digital display, check to make sure the

room temperature is below 90˚F. If the room temperature is too high, place

the dehumidier in a location where the room temperature is below 90˚F for at

least 2 hours before operating again. If the E3 code appears again, contact the

customer service department.

EH: The humidity sensor may be faulty and may need to be changed.

P1 (Model BDT50PWTB): Bucket is not in the proper position. Make sure the

bucket is in place and securely seated for the dehumidier to operate. If error

code reappears after adjusting the bucket, please contact the customer service

department.

E5 (Model BDT50PWTB): The pump drainage kit may not be installed before

start pump function or users use non-standard drainage pipes. (Manufacturer's

original pipe), or the drain cover is not tightened, or the rubber washer is

missing, or poor connection between drain pipe and drain cover.

If any of these error codes appear and remain in the display, please contact the

customer service department as listed on page 18 of the user manual.

Timer OFF

LED Indicator

Bucket Full

LED Indicator

Page 7

INSTALLATION GUIDE

When you open the box, you should have received:

Portable dehumidier

User Guide

Castors (4)

Continuous Drain Kit

If you purchased a model with a pump (BDT50PWTB) there will be an additional

pump drain kit

To Install Castors:

1. For the 20 pint model (BDT20WTB) and the 30 pint model (BDT30WTB)

gently lift the lid of the bucket (see g 1).

For the 40 pint model (BDT40WTB) and the 50 pint models (BDT50WTB,

BDT50PWTB) gently lift off the lid of the bucket (see g 2). Do not pull on handle.

2. Tilt the dehumidier no more than

45 degrees and push to insert the castors

into the base of the unit. Make sure the ring

around the castor is ush against the

bottom of the dehumidier. (see g. 3).

SET UP & USE

Fig. 2

Fig. 3

Fig. 1

Bucket

lid

Hole

Buckle lid

Float

1.Using two hands gently remove lid

from the top of the bucket.

2.Remove casters

from bucket

3.Re-install the lid and be

sure that it is securely

clipped into the bucket

Important Note: Verify the plastic float

system on the top of the bucket is still

securely installed and swinging properly

before placing bucket back in the

dehumidifier

Cast or s and

other accessories

DE T

Cast or s and

other accessories

Page 8

BEFORE FIRST OPERATION

1. Grip each side of the bucket and pull to remove the bucket from the

dehumidier (Fig. 4).

2. Check inside the bucket to make sure the oat system is in the correct

position. If not, place the oat in the correct position (Fig. 5).

3. Re-insert the bucket once you have determined the oat system is in the

correct position (Fig. 6)

The oat in the bucket is essential to the “bucket full” system working properly.

Do not remove the oat and make sure the oat can rotate freely.

SET UP & USE

Fig. 4

Fig. 5

Fig. 6

OPERATION INSTRUCTIONS

NOTE: Unit may shut off automatically during 24 hour period if collection bucket

is full (see below). If continuous drainage mode is utilized, and drain hose

is connected, the unit will operate continuously (see page 12).

1. Press the POWER button once to turn the unit on. Press POWER button again

when you’re ready to turn it off.

2. Press the or buttons under the display to select the desired relative

humidity in the room. Each press will change the room humidity by 5%. The

room humidity is selectable from 35-80% or continuous. The unit will cycle on

and off to maintain the humidity level chosen on the digital display. After few

seconds, it will display the ambient humidity. When the ambient humidity is

lower than the set humidity, the compressor will stop running, and after few

minutes the fan will stop running.

3. If you want the dehumidier to operate continuously regardless of the room

humidity, press button until you see “CO” on the display. This will enable

continuous operation and the indicator will light up on the control panel.

4. Press the FAN SPEED button to select between High and Low Speeds. If HIGH

speed is selected the indicator will light up.

TIMER FUNCTION

To program the unit to automatically turn ON, press the TIMER button when

the unit is OFF. Press the or to increase the timer in 30 minute increments

up to 10 hours. After 10 hours, each press of the will increase the timer in 1

hour increments up to 24 hours. Once the desired time is reached, the unit will

automatically turn ON.

To program the unit to automatically turn OFF, press the TIMER button when

the unit is ON. Each press of the or buttons will change the timer setting

in 30 minute increments up to 10 hours. After 10 hours, each press of the or

buttons will increase or decrease the timer in 1 hour increments up to 24 hours.

Once the desired time is over, the unit will automatically power OFF.

FULL WATER COLLECTION BUCKET

When the water collection bucket is full, the unit will shut off automatically, make

a beeping noise and the BUCKET FULL indicator will light. The dehumidier will

not run again until the bucket is emptied and properly placed back inside the

unit.

SET UP & USE

Page 9

Page 10

NOTE: When the bucket is full or removed from the unit, the compressor will turn

off but the fan will continue to run for a few minutes. This is completely

normal. The dehumidier will not be removing moisture from the air at

this time.

Over time, the dehumidier will create a more stable humidity in the area it is

located.

The more moisture the dehumidier removes from the air, the more often you

may have to empty the bucket unless you choose to use the continuous drain

option. The number of times the bucket will need to be emptied daily will depend

on the dehumidier model.

CAUTION: Do not place the water collection bucket on the oor when it is full as

it is uneven on the bottom and may spill.

SET UP & USE

BDT20WTB 20 pints of moisture

removed every 24 hours

empty maximum of 3 times

per day

BDT30WTB 30 pints of moisture

removed every 24 hours

empty maximum of 4 times

per day

BDT40WTB 40 pints of moisture

removed every 24 hours

empty maximum of 3 times

per day

BDT50PWTB/

BDT50WTB

50 pints of moisture

removed every 24 hours

empty maximum of 4 times

per day

Questo manuale è adatto per i seguenti modelli

Indice

Lingue:

Altri manuali BLACK DECKER Deumidificatore

BLACK DECKER

BLACK DECKER BD22MWSA Manuale utente

Manuali Deumidificatore popolari di altre marche

Daitsu

Daitsu CD031IU-DFA Manuale utente

Fehom

Fehom PDGT701BE Manuale utente

Hitachi

Hitachi RD-190GX Manuale utente

Westpoint

Westpoint MDF1-30AE Manuale utente

SOLIS

SOLIS easy dry compact Manuale utente

ENVIROBOSS

ENVIROBOSS EB240 Manuale utente

Sinclair

Sinclair R-9112 Manuale utente

Kenmore

Kenmore 580.54701 Manuale utente

Demargo

Demargo DM828NF Manuale utente

Altrad Lescha

Altrad Lescha LDH 600 Manuale utente

BOMANN

BOMANN LE 1150 CB Manuale utente

SPT

SPT SD-46 Manuale utente

REMKO

REMKO SLN 40 Manuale utente

Haier

Haier HD458 Manuale utente

Logik

Logik L20DHW12 Manuale utente

Frigidaire

Frigidaire FDR30S1 - 30 Pint Capacity Dehumidifier Guida rapida

Blitz

Blitz HHD Series Manuale utente

Prem-I-Air

Prem-I-Air PD14DEN Manuale utente