Black Widow Security BW 690-C Manuale utente

Congratulations on your purchase of the Factory Keyless

Upgrade security system. Your Factory Keyless Upgrade is man-

ufactured in the U.S.A. and designed by leading security experts

using the latest state of the art technology.

Items supplied with the Factory Keyless Upgrade

• Receiver and control module

• Valet/override switch

• Wiring harness, fuseholder & fuse

• LED status indicator

• Siren (optional)

• Shock sensor (optional)

OWNER’S MANUAL

FACTORY KEYLESS UPGRADE

The Factory Keyless Upgrade is designed to interface with your

existing factory keyless system and will not interfere with its

operation.The system comes with an L.E.D. and override switch.

This system may also come with dual zone shock sensor and

multi tone siren.

Arming Operation: Simply press the lock button on your

factory remote and you will hear one chirp from your

horn/siren, your parking lights will flash one time (optional).

Your doors will lock, the L.E.D.will turn on solid for 10 seconds

then it will start flashing slowly. Once the LED starts slowly

flashing your system will be fully armed.

Disarming Operation: Press the unlock button on your

factory remote, the siren/horn will chirp twice, your parking

lights will flash twice (optional).The L.E.D. will stop flashing, the

doors will unlock and your system is disarmed. (See Security

Modes)

Passive Arming: If your installing dealer installed the system

to passive arm, the system will arm 30 seconds after the last

door has been closed. It will not lock the doors. To disarm the

system simply follow the disarming operation above. When the

system is in the pre-arm mode the led will flash rapidly to let

you know that it ready to arm the system in 30 seconds.

Valet Mode: Valet mode will keep your alarm system from

passive arming (if programmed to be passive arming), if you need

to have your vehicle serviced, or run it through a car wash etc.

To put your vehicle in Valet Mode, turn the ignition key on and

press and hold your valet/override switch in for approximately 5

seconds, the L.E.D. will turn on solid.You vehicle’s system is in

Valet Mode. Deactivate Valet Mode:It will stay in Valet until you

repeat the procedure and the L.E.D. will turn off.

Security Modes: Your system can be programmed 2 differ-

ent ways depending on the vehicle and the additional security

components that are added to it.

Security level 1:The alarm system will simply turn off when you

press unlock button on the remote or by unlocking your car doors.

Security level 2:The alarm system can only be turned off when

the unlock button of the remote control is pressed.

LED Status Modes:

Valet= Solid

Pre Arm Active=Solid for 10 seconds

Armed=Slow flash

Disarmed=Off

Pre Arm Passive= Rapid flash

System triggered while away=Slow double flash

Operating Override/Valet Switch

Valet=Ignition switch on, press override/valet switch for

5 seconds.

Disengage Valet=repeat above process.

Manual Override System=Ignition On press switch

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali Black Widow Security Sistema di sicurezza

Black Widow Security

Black Widow Security BW-1600 Manuale utente

Black Widow Security

Black Widow Security BW 690 Manuale utente

Black Widow Security

Black Widow Security BW 700 Manuale utente

Black Widow Security

Black Widow Security BW 752 Manuale utente

Black Widow Security

Black Widow Security BW FM 6150 Manuale utente

Black Widow Security

Black Widow Security BW 690 Manuale utente

Black Widow Security

Black Widow Security BW RAS 120 Manuale utente

Black Widow Security

Black Widow Security BW FM 100 Manuale utente

Black Widow Security

Black Widow Security BW RAS 130 Manuale utente

Manuali Sistema di sicurezza popolari di altre marche

Inner Range

Inner Range Concept 2000 Manuale utente

Climax

Climax Mobile Lite R32 Istruzioni per il montaggio

CADDX

CADDX NX-6 Manuale utente

FBII

FBII XL-31 Series Manuale utente

Johnson Controls

Johnson Controls PENN Connected PC10 Manuale utente

Aeotec

Aeotec Siren Gen5 Manuale utente

Blaupunkt

Blaupunkt SA 2700 Manuale utente

IDEAL

IDEAL Accenta Manuale del proprietario

AJAX

AJAX DoubleButton Manuale utente

Swann

Swann SW-P-MC2 Manuale utente

Ecolink

Ecolink Siren+Chime Manuale utente

Digital Monitoring Products

Digital Monitoring Products XR150 Manuale utente

EDM

EDM Solution 6+6 Wireless-AE Manuale utente

Highway Safety Group

Highway Safety Group EA401 Manuale utente

Siren

Siren LED GSM Manuale utente

Detection Systems

Detection Systems 7090i Istruzioni per il montaggio

Se-Kure Controls

Se-Kure Controls MicroMini SK-4841 Manuale utente

Siemens

Siemens FDM273 Manuale utente