Blackbird 43395 Manuale utente
4K 6x2 HDMI® Matrix with Audio
P/N 43395
User's Manual
2
SAFETY WARNINGS AND GUIDELINES
Please read this entire manual before using this device, paying extra
attention to these safety warnings and guidelines. Please keep this
manual in a safe place for future reference.
•This device is intended for indoor use only.
•Do not expose this device to water or moisture of any kind.
Do not place drinks or other containers with moisture on or
near the device. If moisture does get in or on the device,
immediately remove it from its power source and allow it to
fully dry before reapplying power.
•Do not touch the device, the power cord, or any other
connected cables with wet hands.
•Do not expose this device to excessive vibration, extreme
force, shock, or fluctuations in temperature or humidity.
•Do not expose this device to excessively high temperatures.
Do not place it in, on, or near a heat source, such as a
fireplace, stove, radiator, etc. Do not leave it in direct sunlight.
•Clean using a soft, dry cloth only. Do not use chemical
cleaners, solvents, or detergents. For stubborn deposits,
moisten the cloth with warm water.
•This device has no user serviceable parts. Do not attempt to
open, service, or modify this device.
3
INTRODUCTION
This 4K 6x2 HDMI® Matrix allows you to independently distribute any
of six HDMI inputs to two HDMI outputs. It supports video resolutions
up to 4K@30Hz, including 1080p@60Hz and 3D video . The audio
associated with either output can be extracted and sent to an
external amplifier or powered speakers using the analog 3.5mm,
digital coaxial, or digital optical (Toslink®) audio outputs. Output A
supports the Audio Return Channel (ARC) HDMI feature, which allows
audio originating from the connected television to be distributed to
the audio outputs. It supports a Picture-in-Picture (PiP) mode when
the output resolution is 4K@30Hz and includes an IR remote control.
4
FEATURES
•Independently distributes up to six HDMI® inputs to two
HDMI outputs
•Supports video resolutions up to 4K@30Hz, including
1080p@60Hz and 3D video
•9.0 Gbps video bandwidth
•Supports up to 36-bit Deep Color
•Supports HDCP™ 1.4
•Includes analog 3.5mm stereo, digital coaxial, and digital
optical (Toslink®) audio outputs
•Output A supports the Audio Return Channel (ARC) HDMI
feature
•Supports the Consumer Electronics Control (CEC) HDMI
feature
•Supports 2.0, 5.1, and 7.1 channel audio, including Dolby
TrueHD™ and DTS-HD Master Audio™
•Supports a Picture-in-Picture (PiP) mode when the output
resolution is 4K@30Hz
•Includes an IR remote control
5
CUSTOMER SERVICE
The Monoprice Customer Service department is dedicated to
ensuring that your ordering, purchasing, and delivery experience is
second to none. If you have any problem with your order, please give
us an opportunity to make it right. You can contact a Monoprice
Customer Service representative through the Live Chat link on our
website www.monoprice.com or via email at
support@monoprice.com. Check the website for support times and
links.
PACKAGE CONTENTS
Please take an inventory of the package contents to ensure you have
all the items listed below. If anything is missing or damaged, please
contact Monoprice Customer Service for a replacement.
1x 6x2 HDMI® Matrix
1x IR Remote Control
1x AC Power Adapter
1x User's Manual
6
PRODUCT OVERVIEW
Remote Control
1. Power Button: Press the Power
Button to turn the matrix on or
to put it into standby mode.
2. Audio Button: Press the Audio
Button to cycle through the
available audio output modes.
The cycle order is 2.0, 5.1, and 7.1.
3. ARC Button: Press the ARC
Button to turn the Audio Return
Channel (ARC) feature on or off.
Only Output A supports ARC and
the connected television must support ARC.
4. PiP Section: Press the PiP Button to turn the Picture-in-Picture
(PiP) mode on or off. PiP is supported only when the output
resolution is 4K@30Hz. Press the Select Button to cycle
through the inputs for the PiP window. Once the desired
input for the PiP window is displayed, press the Enter Button
to confirm the selection.
5. OUT A Section: Press one of the numbered buttons to directly
select one of the six inputs to distribute to Output A.
6. OUT B Section: Press one of the numbered buttons to directly
select one of the six inputs to distribute to Output B.
7
7. Audio Section: Press the OUT A Button to extract the audio
from Output A to the audio outputs. Press the OUT B Button
to extract the audio from Output B to the audio outputs.
Press the A↔B Button to swap the Output from which audio
is extracted.
Matrix
8. INPUT 5/INPUT 6: Two HDMI® ports for connecting HDMI
video source devices.
9. INPUT INDICATORS: Two rows of six LEDs each, labeled Aand
B. One of the LEDs on each row illuminates to indicate the
selected input for each output.
10. AUDIO INDICATORS: Four LEDs indicate whether ARC is on or
off, and the selected audio mode (2.0, 5.1, 7.1). When the ARC
LED is on, the audio from the television connected to output
A is being sent to the STEREO, COAXIAL, and TOSLINK®
8
outputs. The 2.0,5.1, or 7.1 LED illuminates to indicate the
selected audio mode.
11. IR: IR "eye" for receiving signals from the included IR remote
control.
12. OUTPUT A: Press the button to cycle through the available
inputs for Output A.
13. OUTPUT B: Press the button to cycle through the available
inputs for Output B.
14. ARC: Press the button to turn ARC on or off. When ARC is on,
the ARC LED in the AUDIO INDICATORS section illuminates.
15. AUDIO: Press the button to cycle through the three audio
modes (2.0, 5.1, 7.1). The corresponding LED in the AUDIO
INDICATORS section illuminates to indicate the selected audio
mode.
16. RESET: Press the button to reset the matrix to its factory
default settings.
17. POWER: The LED illuminates when the matrix is powered on.
18. DC/5V: DC barrel connector for connecting the included AC
power adapter.
19. HDMI 1/HDMI 2/HDMI 3/HDMI 4: Four HDMI® ports for
connecting HDMI video source devices.
20. OUTPUT B: HDMI port for connection an HDMI display.
9
21. OUTPUT A: HDMI port for connecting an HDMI display.
OUTPUT A supports the ARC feature.
22. STEREO: 3.5mm 2-channel analog audio output jack for
connecting an external amplifier or powered speakers. When
the audio mode is set to 5.1 or 7.1, there will be no sound on
this output.
23. COAXIAL: Digital coaxial audio output for connecting an
external amplifier. If the amplifier does not support the
selected audio format (e.g., Dolby TrueHD™, DTS-HD Master
Audio™, etc.), there will be no sound on this output.
24. TOSLINK: Digital optical audio output for connecting an
external amplifier. If the amplifier does not support the
selected audio format (e.g., Dolby TrueHD™, DTS-HD Master
Audio™, etc.), there will be no sound on this output.
10
SAMPLE CONNECTION DIAGRAM
CONNECTION
Perform the following steps to connect the matrix to your system.
1. Ensure that all devices to be connected are powered off and
disconnected from their power sources.
Indice
Altri manuali Blackbird Commutatore a matrice
