blackloud Buzzi Sprinkler Manuale utente
Quick Guide - 1
Quick Guide - 2
Package Contents
Quick Guide
Smart sprinkler controller
BUZZI Sprinkler This quick guide
2 x mounting screws Power adapter & cable
Quick Guide - 3
Setting Up BUZZI Sprinkler
No. Item Description
1Ethernet LED Displays current Ethernet connection status.
See the “LED Indicators” section below.
2WiFi LED Displays device and wireless connection status.
See the “LED Indicators” section below.
3Power LED Displays current power status. See the “LED
Indicators” section below.
4Wireless
Switch
Toggles wireless access point (AP), mode
between On and Auto. The default mode is On
and should not be changed.
5USB Port For connecting BUZZI Sprinkler with future
products (not for powering BUZZI Sprinkler).
123
4 5
Quick Guide - 4
Setting Up BUZZI Sprinkler
No. Item Description
6Reset Button Resets BUZZI Sprinkler to default factory
settings. Press and hold until device resets (red
WiFi LED blinks).
7DC power in For supplying power to BUZZI Sprinkler via the
supplied power adapter.
8Zone Wire
Connectors
For connecting BUZZI Sprinkler to a total of
eight sprinklers.
9Ethernet port For connecting BUZZI Sprinkler to an Ethernet
network.
Caution: Only use the supplied power adapter; do not use other power adapters with BUZZI
Sprinkler.
6789
Quick Guide - 5
Setting Up BUZZI Sprinkler
The front of BUZZI Sprinkler features three LED indicators that notify
you of the Sprinkler’s status when it is powered on.
The following tables describe the various statuses.
Power LED Status (Blue)
On BUZZI Sprinkler is on.
Off BUZZI Sprinkler is off.
Blinking Firmware upgrade in process or your mobile device is
connected to BUZZI Sprinkler via the Internet.
Ethernet LED Status (Blue)
On BUZZI Sprinkler is connected to an Ethernet network.
Off BUZZI Sprinkler is not connected to an Ethernet
network.
Blinking Firmware upgrade in process.
Quick Guide - 6
WiFi LED Status (Amber/Blue)
Amber LED
blinking
BUZZI Sprinkler is resetting or connecting to a WiFi
network.
Blue LED
blinking
BUZZI Sprinkler is either waiting for connection or
connected (check app for current connection status).
Off BUZZI Sprinkler is off.
Setting Up BUZZI Sprinkler
Quick Guide - 7
Setting Up BUZZI Sprinkler
Hardware Setup
1. PreparingBUZZISprinklerforuse
a (Optional) Mount BUZZI Sprinkler on a wall, using the screw
holes on the bottom of the device. The screw holes are four
inches apart.
4”
4”
Quick Guide - 8
Setting Up BUZZI Sprinkler
b Insert the common wires, and the control wires for up to eight
individual sprinklers, to the zone wire connectors at the front
of BUZZI Sprinkler. Secure each wire by tightening the screw at
the top of its wire connector.
1 2 3 4 5 6 7 8 common
1 2 3 4 5 6 7 8 common
1 2 3 4 5 6 7 8 common
c Connect the common wires, and the control wires for up to
eight individual sprinklers, to your sprinkler system, as shown in
the following image.
1 2 3 4 5 6 7 8 common
Quick Guide - 9
Setting Up BUZZI Sprinkler
2. PoweringonBUZZISprinkler
Plug BUZZI Sprinkler into a power socket using the supplied
power adapter. See the LED status table in the previous section, to
understand LED activity.
3. ConnectingBUZZISprinklertotheInternet
aFor Wifi connection: Have an internet-enabled WiFi router
available. This router will be the wireless communication bridge
between your mobile device and your BUZZI Sprinkler.
Note: Alternatively, you can use your mobile device to create a WiFi hotspot. See
“Connecting to BUZZI Sprinkler” later in this guide, for connection instructions.
bFor LAN connection: Have an internet-enabled Local Area
Network (LAN), available. Plug a LAN connected Ethernet
cable into the Ethernet port at the rear of your BUZZI Sprinkler.
Quick Guide - 10
Setting Up BUZZI Sprinkler
Setting Up The BUZZI Sprinkler App
1. InstallingandlaunchingtheBUZZISprinklerapp
a On your mobile device, download and install the BUZZI
Sprinkler app from either the Google Play Store or the iOS App
Store.
b Make sure that WiFi is enabled on your mobile device, then
launch the BUZZI Sprinkler app. BUZZI Sprinkler will try to
sign in.
c If no account settings can be found, the message Sign in fail
will appear. You will now have the option to sign in with a
BLACKCLOUD account, or create an account.
Indice
Altri manuali blackloud Controllori
