BlackSys CH-200 Manuale utente

Blackbox

CAMMSYS

※ BlackSys Application may vary in function depending on mobile product and OS version.

USER MANUAL

BLACKSYS CH-200

Thank you for choosing BlackSys.

This manual is based on the CH-200 model.

The latest firmware & manual can be found at our website

www.blacksys.co.kr/en

■ Please read carefully before using this product.

※ This manual should be reviewed and retained for future reference.

※ CAMMSYS Corp. reserves all rights to this manual in accordance with the copyright law.

※ Content of this manual is subject to change without notice to ensure quality control.

※ Product functionality may differ depending on firmware.

※ This product is designed as an accessory for safe driving. In the event of an accident, all responsibility is borne

by the vehicle operator. Please use this product responsibly.

■ Scope of guarantee and responsibility

※ This product is a vehicle-accessory for recording video image and sound for the simulation of an accident

and recorded data may be used as evidence and reference purposes. We cannot guarantee this product to capture

all accident related video image and sound. Quality may differ due to weather condition(s).

※ We will not be held responsible for any damages and/or data corruptions or loss caused by a malfunction of this product.

※ In general, the memory card lifespan for this product is ~ 6 months and may be subject to data corruption or loss due to static

electricity and/or external voltage. For this reason, we highly recommend the user to copy and save important data to external

media (hard disc, CD, portable memory, etc.).

USER MANUAL

※ Although this product was applied format free, Image defects (video recording missing, seamless, frame change or missing, other

image saving defect, etc.) can occur due to general speed reduction of the memory card and other defects.

CAMMSY is NOT responsible for any problems and/or damages that may occur from not using genuine SD card. It is strongly

recommended that CAMMSYS memory cards are used to minimize memory card error, and the SD card should be

formatted every month to maximize the lifetime of the memory card.

※ Please note that CAMMSYS will not be held responsible for traffic accident, any damages caused by ADAS error.

The functions of the ADAS have limitations: Always stay on course using the steering wheel and drive with care. The system is not

designed to compensate for a driver’s lack of caution and if you rely too much on the ADAS it could lead to an accident. The driver

is responsible for assuring lane changes and other maneuvers. Always pay attention to the direction in which the vehicle is

traveling and the vehicle’s surroundings.

※ The data accuracy of ADAS can vary depending on the user’s environment. It is recommended that you use the data only for

reference purposes only.

CONTENTS

Contents

01 Product Precaution

1-1. Caution …………………… 05

1-2. Installation caution …………………… 08

1-3. GPS caution …………………… 07

1-4. Memory Card …………………… 09

1-5. ADAS caution …………………… 10

02 Features …………………… 11

03 Package & Part Names

3-1. Package Guide …………………… 14

3-2. Front & Rear …………………… 15

3-3. Left & Right …………………… 16

04 Installation

4-1. Front Camera (Main product) ……………… 17

4-2. Rear Camera …………………… 19

4-3. Memory Card Usage …………………… 20

05 Product Usage

5-1. Standard Operation Guide ………………… 21

5-2. LED indicator and Voice Guide …………… 25

5-3. Using BlackSys App …………………… 28

5-4. Connecting the BlackSys App ……… 29

5-5. BlackSys Viewer …………………… 33

06 Firmware Update

6-1. Firmware Update …………………… 37

6-2. Download (Firmware & PC viewer) ……… 37

07 How to format SD card

7-1. PC format …………………… 38

7-2. Format on product …………………… 38

08 Technical Specification …………………… 39

09 Customer Service …………………… 40

10 Quality Assurances …………………… 41

11 Product Warranty …………………… 42

USER MANUAL

01 Product Precaution

1-1 Caution

1. Do not expose product to direct sunlight or cold weather for extended periods of time.

Product exposure to direct sunlight and extreme temperatures may cause damage to the product.

2. Do not dismantle or alter the product.

Do not disassemble, modify, or attempt to repair the product. Any alterations to the product can void the manufacturer’s warranty.

Please contact your local dealer or the C/S Centre for more information.

3. Do not dismantle or alter the product accessories.

Do not disassemble, modify, or attempt to repair any accessories for this product (Cigar Jack Cable, Mount, etc.). This may cause damage

to the vehicle and/or product. Any resulting damage shall be the responsibility of the user and is not covered under the manufacturer’s

warranty.

4. Do not allow liquid to come into contact with product.

Please note this product is not waterproof and exposure to liquid and foreign substances may cause a product malfunction, short circuit,

and/or fire. Use caution when cleaning the product and clean with a soft and dry cloth.

5. Do not expose the product to heavy impacts.

Excessive impacts to this product can cause a malfunction. Handle the product with care.

6. Only use manufacturer’s approved power cable and accessories.

Any damages or loss to product/vehicle as a result of accessory incompatibility will not be covered under the manufacturer’s warranty.

7. Any accessory or peripheral which manufacturer doesn’t supply will not be covered by warranty.

We will not provide warrant for any accessory or peripheral if these are not authorized by us. User will be responsible for the damage

caused by using unauthorized accessory or peripheral.

8. Do not operate the product for extended periods of time while the vehicle is not running.

Excessive use of the product while vehicle is off can cause drainage to the vehicle’s battery

06 CAMMSYS BLACKBOX

9. Video quality may vary depending on extreme lighting conditions.

Quality is subject to alterations in extreme dark/light areas and conditions. Most notability when entering/exiting a tunnel or parking garage.

10. Data may not be recorded if accident impact is lower than a predetermined threshold.

In extreme cases the product may not record data during an accident due to low impact forces. In addition, during a high force impact

accident power may be cut off to the product and data may be lost.

11. Do not disconnect the power source while the product is turned-on.

Disconnecting the power source may cause the product to malfunction. Please use only the recommended voltage for power connection.

12. Some PCs may not support BlackSys Viewer or there may be some disconnections in voice/image depending

on the PC’s specifications.

13. AE operations at night may vary depending on vehicle (black, red) low light reflection.

14. There may be frame omissions due to rapid AE operational changes in low light areas.

Please reset the installation angle of the product if AE operation malfunctions.

15. There may be noise in the video when recording in poor lighting environments.

16. In the event of a sudden frame change or switching between parking & driving modes, there may be a loss of data.

17. Motion detectors may malfunction in the event of an extreme increase/decrease to the surrounding lighting

conditions of the vehicle.

18. The motion detection function may not operate properly in environments with poor lighting conditions

due to noise and vehicle security LED(s).

*AE : Automatic Exposure

USER MANUAL

19. The left/right side image quality of this product may vary due to characteristics of the wide-angle lens.

21. Please ensure all accessories are connected to product(s) to avoid data loss.

22. The interworking draft using Wi-Fi between smartphone and product cannot be connected simultaneously,

also when it is connected with product you cannot access internet.

23. Playing video or any other functions may not operate properly on specific kind of smart phone.

24. Using internet is restricted on the status of connecting product.

25. Do not continue to use this product if a malfunction is apparent. Please contact our C/S center

or your local distributor with any questions and/or concerns about this product.

08 CAMMSYS BLACKBOX

1-2 Installation caution

1. Keep product clear of clutter.

Please ensure the surrounding area is clutter free to avoid reflections/vibrations that may reduce the image/audio quality.

2. Ensure camera lens is clean at all times.

Allowing the camera lens to collect dust/oils will reduce the quality of the image.

3. Do not attempt to operate or install the product while driving.

For your safety, do not attempt to operate or install the product while driving to avoid a traffic accident.

4. Please keep the product securely fixed to mount.

Please check that the product is secured before operating the vehicle. This will ensure the best image quality and avoid distractions

to the driver while in motion.

5. Please avoid excessive window tints, as this may distort image quality.

6. Install this product at the point furthest away from the antenna or receiver as possible.

The electromagnetic waves produced by the product may distort receiving sensitivity.

7. Installing camera on the tinted window is not recommended and be careful on damage of tinted window while

uninstalling camera for service or other reason. We don’t take any responsibility for the damage and so please

be careful while uninstalling camera.

1-3 GPS caution

1. There is an error range of over 15m in a normal commercial GPS. There may be situation where the GPS signals

cannot be received depending on the environment such as buildings, underground, and tress. This can make the

error range bigger.

2. A combination of factors including weather can delay the time to receive the first GPS signal after power is

connected to the product.

USER MANUAL

1-4 Memory Card

1. Do not remove the SD card by force while the product is in recording mode.

Please turn off the product before removing the memory card(s). Removing the memory card(s) while the product is turned on may damage

the video file or cause an internal operational error.

2. Be sure to periodically reformat the memory cards using the BlackSys Viewer or the product itself.

Repetitive data creation and deletion by the product can cause damage to the SD card(s) and its file. SD card should be

formatted once a month. The warranty period of a memory card is 6 months, and we are not held responsible for any recording errors due

to prolonged use of a memory card after the 6 month period.

3. After reformatting a memory card, it can be used without configuration files such as firmware.

The latest set value is contained within the product, and will be automatically applied to the SD card(s).

4. Please use Authorized memory cards to ensure the best quality.

5. The memory card(s) operate at high temperatures, and we recommend you use caution when inserting and removing.

6. Please backup your recorded videos using an external storage product (PC, HDD, etc.).

7. Be sure to insert the SD card into the product.

Without the SD card, the camera does not start recording.

9. The device has Format-Free function. With this function, malfunctions may occur if unsupported files are copied to,

moved or deleted from the SD card.

3. External electronic products and window tinting may affect the GPS reception.

4. Vehicle speed accuracy may vary between 1-30km/h depending on the reception area when stopping the car.

5. GPS may be operated when switching off the product.

6. In case of using anti-ultraviolet glass window, GPS reception won’t be working properly.

7. Without GPS, time on the product may not be accurate.

10 CAMMSYS BLACKBOX

1-5 ADAS caution

1. Only usable with GPS installed.

2. To use the ADAS Auto-calibration function, please install the product in accordance with the product

installation guide. (see P.17)

3. The system(LDWS) may not operate adequately according to the actual driving conditions, resulting in an accident.

- Driving on roads with tight curves.

- Driving under bad weather conditions (rain, fog, and snow).

4. If the dash cam position or angle adjustment are adjusted after completed Auto-calibration, ADAS may

malfunction.

5. After adjusting the dash cam position or angle adjustment in the ADAS operation, be sure to reboot after power

off and perform auto-calibration.

6. Auto calibration condition

- Dash cam power ON

- GPS Data Received

- Vehicle speed higher than 30 km/h and drive for more than 3 minutes

7. Press the Wifi button in the dash cam for more than 3 seconds to re-calibrate.

8. In a poor sensitivity GPS or shadow areas, the ADAS function may not work or malfunction.

9. The functions of the ADAS have limitations: Always stay on course using the steering wheel and drive with care.

The system is not designed to compensate for a driver’s lack of caution and if you rely too much on the ADAS it

could lead to an accident. The driver is responsible for assuring lane changes and other maneuvers. Always pay

attention to the direction in which the vehicle is traveling and the vehicle’s surroundings.

Indice

Altri manuali BlackSys Videocamera

BlackSys

BlackSys CAMMSYS CH-100B Manuale utente

Manuali Videocamera popolari di altre marche

Toshiba

Toshiba CAMILEO Z100 Manuale utente

Panasonic

Panasonic NV-VS40B Manuale utente

Canon

Canon RC 260 Manuale utente

Sony

Sony Handycam DCR-DVD7E Manuale utente

Brinno

Brinno TimeLapse TLC200 Manuale utente

JVC

JVC GR-SXM68AC Guida rapida

Panasonic

Panasonic AG-HMC152EN Manuale utente

Insignia

Insignia NS-DCC5HB09 - Camcorder - 720p Manuale utente

MYDLINK

MYDLINK DCS-6100LH Manuale utente

Sony

Sony video Hi8 Handycam CCD-TR555 Manuale utente

SECURECOM

SECURECOM V-5014B Manuale utente

Panasonic

Panasonic HDC-SD100 Manuale utente

Sharper Image

Sharper Image U-VIDEO Manuale utente

JVC

JVC AA-V15EG Manuale utente

Canon

Canon LEGRIA HV40 Manuale utente

Sony

Sony Handycam DCR-VX2000 Manuale utente

RCA

RCA CC616 Manuale utente

Panasonic

Panasonic NVM40 Manuale utente