BLADEZ BF-6.5E Manuale utente

Revised: 9/07/2004

ELLIPTICAL BF-6.5E

OWNER’S MANUAL

BLADEZ Corporation

20155 Ellipse

Foothill Ranch, CA 92610

Phone: 949-206-0330

Fax: 949-206-0350

Email: [email protected]

MANUFACTURER’S LIMTED WARRANTY

WHAT DOES THE WARRANTY COVER?

This warranty covers your fitness product against defects in material and workmanship

when used for the purpose intended, under normal conditions provided it receives

proper care. The warranty is extended only to the original owner and is not transferable.

HOW LONG DOES THE COVERAGE LAST?

•LIFETIME FRAME

•2 YEARS ALL OTHER PARTS

•1 YEAR LABOR

WHAT DOES THIS WARRANTY NOT COVER?

This product is designed for home use. This warranty does not cover fitness products

which are (1) used in a commercial environment; or (2) subject to misuse, neglect,

accident, or unauthorized repairs and alterations; or (3) running belt and drive

adjustments; and (4) normal maintenance functions. Some states do not allow the

exclusion or limitation of incidental or consequential damages, so the above limitation or

exclusion may not apply to you.

REPAIR PARTS AND SERVICE

All of the parts for this elliptical can be ordered from your local

dealer. Dealers also have trained service personnel who can

assist you with any service questions you may have.

OVERVIEW DRAWING

PRE-ASSEMBLY CHECK LIST BF 6.5E

Item Description Qty Item Description Qty

A Lower Frame Assembly 1 N Spacer 2

B Upright Tube Cover 1 O Left Handrail 1

C Left Upper Cover 1 P Right Handrail 1

D Bolt 5x20 2 Q Bolt M8x20 (5/16"x20) 2

E Right Upper Cover 1 R Plastic Cap 2

F Adapter 1 S Console 1

G Front Foot 2 T Wrench 1

H Roller Cap 2 U Bolt M8x20 (5/16"x20) 4

I Bolt M6x15 (1/4"x15 2 V Spring Washer M8 (5/16") 4

J Left Handrail Cover 1 W Bolt M5x12 4

K Right Handrail Cover 1 X Upright Tube 1

L Bolt with Nut M5x32 2 Y Water Bottle 1

M Bolt M8x10 4 Z Water Bottle Holder 1

Z1 Bolt M4x12 2

ASSEMBLY INSTRUCTIONS

1.1

Attach the wires together from the

upright tube to the main assembly.

Assemble the upright tube (X) to the

lower frame assembly (A) using 4 bolts

(U) and 4 spring washers (V). Attach the

water bottle holder to the frame using 2

bolts (Z1).

1.2

Attach the wires together from the

console (S) and the upright tube and

assemble the console to the upright

tube using 4 machine screws that are

already attached to the back of the

computer console.

Attach left (C) and right (E) upper

covers, along with the upright tube cover

(B) to the frame with 2 screws (D).

These must be attached from the left

side to the right side.

ASSEMBLY INSTRUCTIONS

Using a bolt (Q) and a plastic cap (R),

assemble the left and right handrail to

the upright tube.

4.1

Slide the axle into the front bearing

assembly of the connector post. Attach

to the handrail using 2 machine screws

(M). Note: Screws must be secured

tightly on both sides to prevent the axle

from spinning inside of the bearing

housing. Repeat for opposite side.

4.2

Assemble the left and right handrail

covers to each handrail using 1 bolt and

nut for each side (L).

ASSEMBLY INSTRUCTIONS

Insert the front foot (G) into the frame

(A) and insert and tighten 2 bolts (I) per

side. Then slide the roller caps on (H).

OPERATION GUIDE BF 6.5E

Explanation of Keys

+ - Keys: Increases the values of the program and increases the resistance while using

the machine.

ENTER/SELECT – Enters and selects values during programming. While exercising,

this key also changes the rpm value to speed (mph or kph).

START/STOP/RESET – Press once to start the clock: press during the workout to stop

the clock: press and hold for two seconds to reset all values.

OPERATION GUIDE BF 6.5E

Operation of the BF 6.5E

1. Plug the electrical cord into the base of the unit and into a grounded outlet.

2. Quick Start – Press START and you may begin exercising in the manual mode.

The time will count up from 00:00 and you may adjust the resistance using the + -

keys.

3. Programs

Program 1 – Manual

Program 2 – Rolling Hills

Program 3 – Valley

Program 4 – Fat Burn

Program 5 – Ramp

Program 6 – Fitness Test

Program 7 – Random

Program 8 – Plateau

Program 9 – Intervals

Program 10 – Mountain

Program 11 – User 1

Program 12 – User 2

4. Using the + - keys, select the program you wish to use and press ENTER. You

may then start to exercise with time counting from 00:00 by pressing START.

Note: If no time value is set, each of the 10 program segments will be two

minutes in length.

OPERATION GUIDE BF 6.5E

5. If desired, you can preset a time goal for your workout. After entering the

program you want to use, TIME will be blinking. After using the + - keys to get to

your desired goal, press ENTER. Then press START to begin the workout. Note:

Each segment will be 1/10 of the time goal, so if a time goal of 30 minutes is set,

each segment will be 3 minutes. If a time goal of 10 minutes is set, each segment

will be 1 minute.

6. It is also possible to set a wattage level, or resistance level, for the first segment.

After you have set the time, and before you press enter, you can adjust the

wattage for the first segment, using the + - keys, and press ENTER. Then press

START to begin the workout. It is also possible to adjust the resistance during

the workout by pressing the + - keys. This will change the resistance of all of the

segments when this is done.

7. User Programs – The user programs can be set while exercising on the BF 6.5E,

or before using the BF 6.5E. After selecting any of the user programs, use the + -

keys to select the time, and press ENTER. Then, using the + - keys, select your

age and press ENTER. You may then press START and begin exercising and

the BF 6.5E will remember the resistance level at the end of each segment. Or,

before pressing START, adjust the resistance level for segment 1 and press

ENTER to store the resistance level. You then adjust for segment 2 and press

ENTER to store. This can be done for any or all 10 segments, press START and

begin exercising. The resistance level remains in memory until changed.

Indice

Manuali Ellittica popolari di altre marche

Weslo

Weslo Momentum 4.0 Elliptical Manuale operativo e di manutenzione

Progear Fitness

Progear Fitness Air elliptical pro 1307 Manuale utente

Torque Fitness

Torque Fitness XPLLP Manuale utente

Octane Fitness

Octane Fitness PRO3700C Manuale utente

Xterra

Xterra FS5.8e Manuale utente

Bodyguard

Bodyguard E-40 Manuale utente

Bonn Germany

Bonn Germany Concept 2.2 Manuale utente

Precor

Precor Resolute RSL 620 Manuale utente

NordicTrack

NordicTrack E 9.2 Elliptical Manuale utente

Vision Fitness

Vision Fitness X6600iNetTV Manuale utente

Matrix

Matrix MX-A5x Manuale utente

SportsArt Fitness

SportsArt Fitness ECO-NATURAL Elite E874 Manuale utente

Sears

Sears FREE SPIRIT C249 30737 0 Manuale utente

True

True FS-64 Manuale utente

Sport-thieme

Sport-thieme ST 310 Manuale utente

VIRTUFIT

VIRTUFIT CTR 1.1 Manuale utente

Kettler

Kettler GIRO C 1 Manuale utente

CIRCLE FITNESS

CIRCLE FITNESS E7 Manuale utente