Blastrac 1-15DS Manuale utente
Operating Instructions
1-15DS
MAN-1-15DS-EN
Technical data
Safety instructions
General
Transport
Initial operation
Operation
Maintenance
Electrical systems
Fault diagnosis
Spare parts
Design and specifications are subject to
change without notice - Augustus 2000
Blastrac
Utrechthaven 12
3433 PN Nieuwegein
THE NETHERLANDS
T +31(0)30 - 601 88 66
F +31(0)30 - 601 83 33
I www.blastrac.com
Nieuwegein
1-15DS Operating Instructions
Technical data
Contents Chapter 1
1.1 Rating
1.2 Unit specifications
1.3 Operative range and correct usage
1.4 Stand-by power supply (generator)
1.5 Machine type designation
1.6 Advice for operators of blast cleaning machines
1
Operating Instructions 1-15DS
Technical data
1.1 Rating
Unit / designation : Blastrac blast cleaning machine
Machine type : 1-15 DS MK II
Manufacturer : Blastrac
Utrechthaven 12
NL-3433PN Nieuwegein
THE NETHERLANDS
1.2 Unit specifications
Dimensions:
1-15DS
Length 1800 mm
Width 570 mm
Height 1200 mm
Weight 500 kg
Connected loads (electrical system):
The indicated input current values correspond to the nominal current
values of the motors working under full load. These values are not
achieved under normal operating conditions.
1-15DS Power
consumption
Input
current
Blast wheel drive 15,0 kW max. 30 A
Drive motor 1,1 kW max. 2,8 A
Dust collector 5,55 kW max. 12 A
Electrical connection required : 400 V, 50 Hz, 63 A, CEE plug
2
1-15DS Operating Instructions
Technical data
Blast wheel size : 200 mm Ø
Working width : 380 mm
Drive speed : 0,5 - 29 m/min
Blast cleaning output on concrete : up to 240 m²/h
Dust hose connection : 150 mm Ø
Recommended abrasive : Media No. 2 - No. 5
Abrasive consumption : 100 g/m²
Contact Blastrac for a suitable Blastrac filter unit
1.3 Operative range and correct usage
The 1-15DS is exclusively designed to clean dry,
frost-free horizontal surfaces. The machine may not
be used for other purposes. The manufacturer will
not be liable for damage resulting from such
incorrect usage. In these cases the user assumes all
risks.
1.4 Stand-by power supply (generator)
If the 1-15DS blast cleaning machine is operated
using a generator, this generator must be operated
in accordance with the current VDE directives (this
applies to the protective earth conductor in
particular) in order to ensure that all safety devices
are functioning and to eliminate possible damage to
electrical components.
3
Operating Instructions 1-15DS
Technical data
1.5 Machine type designation
number of blast wheel
s
blast cleaning widt
h
product cod
e
1 - 15 DS
1.6 Advise for operators of blast cleaning machines
In accordance with the accident prevention regulations for blast
cleaning work (VBG 48) the operator must provide operating
instructions for blast cleaning work in a form and language that is
understandable.
The blast cleaning machine Operating Instructions are only part of
these operating instructions. Please consult the current accident
prevention regulations for the precise content.
During operation the acceptable noise level of the 1-15DS blast
cleaning machine could exceed 85 dB(A). This noise level
depends on the local circumstances. When the noise level is 85
dB(A) or more, the machine operator and persons working near
the machine must wear sound-insulating equipment.
Before operation, please make inquiries after the surfaces to be
treated in view of health hazard or carcinogenic materials. When a
different filter material is needed for the filter unit, please contact our
local Blastrac customer service department.
4
1-15DS Operating Instructions
Safety instructions
Contents Chapter 2
2.0 Warnings and symbols
2.1 Organisational measures
2.2 Personnel selection and qualification
2.3 Safety precautions applicable to different operating conditions
2.4 Special work within the scope of use of the equipment and
maintenance activities as well as repairs during operation
2.5 Definition of the Safety off position
2.6 Particular dangerous aspects of the equipment
2.7 Electrical engineering regulations
1
Operating Instructions 1-15DS
Safety instructions
2.0 Warnings and symbols
The following denominations and symbols are used in the Operating
Instructions to highlight areas of particular importance:
Symbol of operational safety.
In these Operating Instructions this symbol will be
shown next to all safety precautions that are to be
taken in order to ensure prevention to life and injury.
Follow these instructions and take special care in
these circumstances. In addition to these
instructions, the general safety precautions and
accident prevention guidelines are also to be
followed.
Particular details regarding the economical use of
the equipment.
Information, instructions and restrictions with regard
to possible risks to persons or to extensive material
damages.
2
1-15DS Operating Instructions
Safety instructions
Warning against dangerous voltages.
Indications relating to protective devices in electrical
appliances.
Indications where consultation with the
manufacturer is required.
Instructions relating to periodical checks.
Reference to important instructions contained in the
Operating Instructions.
2.1 Organisational measures
The Operating Instructions are to be kept near the location
where the machine is located and must be within reach at all
times!
In addition to the Operating Instructions general and legal regulations
regarding accident prevention and environmental protection must be
complied with and indicated!
Such duties may for example relate to the handling of hazardous
substances or to the provision and wearing of personal protection
equipment as well as compliance with traffic regulations.
3
Altri manuali per 1-15DS
1
Indice
Altri manuali Blastrac Altro
