Blaupunkt VIO-DP20 Manuale utente
Home Security IP Camera
Enjoy it.
Quick Start Guide
IP Camera VIO-DP20
EN Quick Start Guide
IP Camera VIO-DP20
4
DE Schnellstart-Anleitung
IP Kamera VIO-DP20
10
FR Mode d’emploi
Caméra IP VIO-DP20
16
FI Käyttöopas
Sisäinen IP-kamera VIO-DP20
34
ES Manual de usuario
Cámara IP para interiores VIO-DP20
28
IT Manuale utente
Telecamera IP VIO-DP20
22
4
English
1. Kit Content
VIO-DP20 IP Camera
English | Manual
Antenna
Power Supply EU type
3 wall screws / 3 plastic anchors Mounting map sticker
Quick Start Guide
NOTE:
•This manual is for reference only. Slight dierence may be found in the user
interface. All the designs and software here are subject to change without prior
written notice.
•All trademarks and registered trademarks mentioned are the properties of their
respective owners.
5
English
1
23
4
5
78 9
6
2. Product Description
1. Dome cover
2. Dome housing
3. Camera Power connector
4. Ethernet Network port
Indicator LED status: Camera status:
Orange light on Camera is connected with via LAN with Router
Green light on Camera has power and is in operating mode
Green light ashes once Reset is conrmed
5. Micro SD card slot
6. Wireless antenna
7. Indicator light 1
8. Indicator light 2
9. Reset button
NOTE:
This quickstart guide explains the installation and registration of the VIO camera. If
you want to learn more about the camera or the Cam4Home Plus app please check
chapter 6.
6
English
Download and install the“Cam4Home Plus”APP to
your smartphone from the App Stores.
3. Learn in a Camera
Connect your smartphone to your Wi-Fi network.
Step 1:
Step 2:
NOTE: If you are using a dual-band router, make sure that your smartphone is
connected to a 2.4 GHz WiFi Network and not to a 5GHz Wi Network. To learn
more about this please check your router manual.
Open the“Cam4Home Plus”APP. Create a user account by pressing the
“sign up”button located at the bottom left hand side.
To add a new camera tap the“+”button at the top right of the screen and
scan the QR code of the camera (refer to chapter 2 product description). Then follow the
insturctions on the App to complete the camera registation
Step 3:
Step 4:
NOTE: If you encounter any problem during the registration, check Chapter 5
Camera settings:
To access the camera settings go to the camera dasboard and tap the settings icon
at the top right.
4. Cam4Home Plus Management
Camera dashboard:
Tap on your camera under the main“device”menu.This will bring you to the camera
dashboard, where you can see the camera live stream video.
Push notications
On the device menu tap the 3 dot icon and select“Alarm Notications” .
Tap the“Alarm Notication”button to activate / deactivate the push notications.
NOTE: To receive push notications“Motion detection”must be enabled.
Important: Ensure that you have given permision to show pop up notications on your
smartphone permision settings.
Motion detection
To enable / disable motion detection go to: Camera dashboard --> Settings icon --> Arm
settings --> Motion detection. Note: Motion detection is enabled by default.
Video Storage
To storage video recordings the camera needs to have a Micro-SD card installed (see
chapter 5.1) or a Cloud Storage Plan activated.
7
English
5. Installation
Step 1:
5.1. Micro SD installation (optional)
•Locate the Micro SD-Card compartment of the DP20. (refer to chapter 2 point )
•Slide the Micro-SD card slot to the OPEN position as displayed on the Micro-SD
card slot. After the Micro-SD card slot is in the open position open it and place the
Micro-SD card inside. Close the Micro-SD card slot and move it to the LOCK position
as displayed on the Micro-SD card slot.
5
NOTE: The Micro SD-Card is mandatory for local recording. Please make sure the
Micro SD-Card is CLASS10 rated. Supported are Micro SD-Cards from 8GB to 128GB.
Use the included hex wrench to open the dome cover by unfastening three
inner hex screws.
Step 2:
Take out the mounting map sticker and stick it on the ceiling or the wall.
Step 3:
•Check your WiFi signal strength and make sure that the WiFi signal is strong at
the location of your camera. For best performance, the smartphone needs to be
connected to a Wi-Fi network.
•Note: We recommend taking a picture of the label at the back of the camera. In case you
need to check the serial number, MAC address or QR-Code at a later stage.
5.2. Installation without mounting bracket
Find the desired installation location for the camera. Position the camera
where a power socket is in sucient proximity. Turn the camera ON and use the live
view image from the app to position the camera where everything to monitor is well in
view.
1. Installation Surface
2. Mounting Map Sticker
3. Antenna
4. Enclosure
5. Inner Hex Wrench
6. Plastic Anchors
7. Dome Pedestal
8. Pan Rotation Direction
9. Tilt Rotation Direction
10. Installation Screw
1
2
3
4
5
6
7
8
9
10
8
English
Use the mounting map sticker, to mark the position of the drilling points.
There are three holes for the screws and a big hole for the ethernet network port and
the camera power connector.
Step 4:
Drill through the 3 small marked points and install the plastic anchors on
the 3 small holes. Then choose one of the option bellow:
Step 5:
Adjust the dome camera according to the mounting map sticker and line
up the three screw holes in the dome pedestal to the three plastic anchors holes. Fix the
three screws in the three plastic anchors rmly.
Step 6:
Use three Inner hex wrench screws to x the Dome housing on the pedestal.
Step 7:
Connect the Camera Power connector to the included power supply cable.
Then connect the power supply cable to the power line socket. Optional: If you want
to install your camera via Ethernet cable, connect your camera to the router using an
Ethernet cable.
Step 8:
5.3. Installation with mounting bracket (optional)
•The VIO-DMB1 mounting bracket is an optional accessory purchased separately
from the camera. If you desire to install the camera with the mounting bracket
please refer to the manual inside the mounting bracket box.
NOTE:
If due to special circumstances, such as a reinforced concrete wall, it’s not possible
to drill a hole of 20mm diameter, you have the option to cut o the thick Ethernet
Network port - see“Chapter 2. Product Appearance”, and seal it with a proper sealing
tape. With this option only a 12mm diameter drill is needed.
Alert: If you decide to cut o the Ethernet Port, you will lose the possibility to connect
the camera by Ethernet cable to a router or NVR. Additionally, you lose your right of
return.
•If the ethernet network port and camera power connector need to exit from the
back of the camera through the installation surface, drill a hole according to the
size of the bigger hole on the mounting map sticker. (For the big hole ideally use a
SDS-max 20mm drill)
•If the Ethernet Network port and Camera Power connector need to exit from the
side of the camera, the cable must go through the U-shape side exit on dome
pedestal.
9
English
6.5 Factory Reset
Plug in the camera and wait 1 minute until it boots up.
Step 1:
6. Help
If you experience any issue or have questions go to the FAQ in the app at:
“Me”menu -> Settings --> FAQ
For additional help, contact our technical support. To nd
your country customer support service, visit:
http://security.blaupunkt-service.com
6.1 FAQ
6.2 Cam4Home Manual
6.3 How to Videos
If you want to learn more details of the Cam4Home Plus APP, download the Main APP
manual, with the following steps:
Visit: https://www.blaupunkt.com/service
1. On the 1st dropdown menu select your language
2. On the 2nd dropdown menu select“VIO-Series”
3. On the 3rd dropdown menu select “Manual”
4. Click“Submit”
5. Locate and click on“VIO-- Cam4Home Plus - Manual”
6.4 Customer Support and Returns
For“How-to-Videos”on the installation and registra-
tion please visit our youtube channel by scanning
the QR code. And then select your language from the
playlist.
Press the reset button for 10 seconds until the green light ashes once.
Wait for the camera to nish the rotation.
Now the camera is reverted to default settings.
Step 2:
Step 3:
Step 4:
1 2
3
4
Returns: If you wish to return your camera, we strongly advise that you rst delete
any camera paired to your account before sending the camera back.
10
Deutsch
1. Lieferumfang
VIO-DP20 IP Kamera
Deutsch | Schnellstart-Anleitung
Antenne
Netzteil EU-Typ
3 Wandschrauben /
3 Kunststodübel
Montage-Schablone
Schnellstart-Anleitung
HINWEIS:
•Diese Schnellstart-Anleitung ist nur eine Ansatz. Es kann Abweichungen im
Vergleich zur tatsächlichen Benutzeroberäche geben. Alle Designs und die
Software können ohne Vorankündigung jederzeit geändert werden.
•Alle vorkommenden Markenzeichen und registrierten Marken sind Eigentum der
entsprechenden Eigentümer.
Altri manuali per VIO-DP20
2
Indice
Lingue:
Altri manuali Blaupunkt Telecamera di sicurezza
Blaupunkt
Blaupunkt VIO-B10 Manuale utente
Blaupunkt
Blaupunkt VIO-B40 Manuale utente
Blaupunkt
Blaupunkt IRC-S2 Manuale utente
Blaupunkt
Blaupunkt VIO-D40 Manuale utente
Blaupunkt
Blaupunkt VIO-DP20 Manuale utente
Blaupunkt
Blaupunkt HOS-X20 Manuale utente
Blaupunkt
Blaupunkt VIO-HS20 Manuale utente
Blaupunkt
Blaupunkt VIO-DP20 Manuale utente
