Blaze King CL4416 Manuale utente
180-0403 v1.00 April 23, 2021
Pour la version française de nos manuels . vous référez à notre site web: www.blazeking.com
S.0403 Rear Black Glass - CL4416
ONLY THE GLASS SUPPLIED BY THE MANUFACTURER MAY BE USED WITH THIS
APPLIANCE. THE GLASS MUST BE INSTALLED AS DESCRIBED IN THIS MANUAL.
IF GLASS IS BROKEN, SEE DEALER FOR OEM REPLACEMENT.
Manufactured By
Valley Comfort Systems Inc., 1290 Commercial Way, Penticton, BC, V2A 3H5, Canada
Phone: 250-493-7444 Fax: 250-493-5833 www.blazeking.com info@blazeking.com
CALIFORNIA PROPOSITION 65
WARNING: This part is to be used in a heating appliance that can expose
you to chemicals including benzene, which is known to the State of California to
cause cancer and birth defects or other reproductive harm. For more information:
www.P65Warnings.ca.gov
180-0403 v1.00 April 23, 2021
Page 2 S.0403 REAR GLASS - CL4416
Fig. 3
REAR GLASS
INSTALLATION
NOTE: Must be installed
before side glass.
1. If applicable; turn offthe
appliance and electrical
power. Allow the
appliance to cool down
completely. Remove
the safety screen and
glass door. (See owners
manual for instructions.)
Remove any log pieces
and set aside, note log
positions, refer to log
installation manual for
clarification.
2. Back offthe two screws
holding the rear glass
clips, slide the clips out
of the key hole and set
aside. (Fig. 1)
3. Handle the rear glass
by the edges to prevent
smudging, wear clean
vinyl gloves if possible.
Position the glass into the
firebox. Rest the glass
on the rear ledge behind
the floor glass support
brackets. (Fig. 2 & 3)
4. Push the panel back
against the rear wall of
the firebox, centering
it left to right. While
holding the glass in
position re-insert the rear
glass clips from STEP 2,
push them firmly against
the glass and tighten the
screws. (Fig. 3)
Fig. 1
Fig. 2
FLOOR GLASS
SUPPORT
BRACKETS
Indice
Altri manuali Blaze King Accessori per caminetti
