HD11CTRL USER MANUAL
09contact support@blustream.co.uk |support@blustream.com.au
RS-232 COMMAND DESCRIPTION
EDIDSAVE xx
Load the custom external EDID from USB, then save it into slot xx
xx = 22: User EDID 1
xx = 23: User EDID 2
RELAY1 xxx Set The Relay 1 Delay Time To xxx (Default 10s, Range From 3s To 180s, 00=Fixed Open)
RELAY2 xxx Set The Relay 2 Delay Time To xxx (Default 10s, Range From 3s To 180s)
IRLEARN x Learn IR Command Into Slot x
x = 1 Learn IR Display On
x = 2 Learn IR Display Input Select
x = 3 Learn IR Display O
x = 4 Learn IR User Command 1
x = 5 Learn IR User Command 2
IRDEL x Delete IR Command In Slot x
x = 1 Delete IR Display On
x = 2 Delete IR Display Input Select
x = 3 Delete IR Display O
x = 4 Delete IR User Command 1
x = 5 Delete IR User Command 2
IRSEND x Send IR Command In Slot x
x = 1 Send IR Display On
x = 2 Send IR Display Input Select
x = 3 Send IR Display O
x = 4 Send IR User Command 1
x = 5 Send IR User Command 2
IRDLY xxx Set Sending Interval Time To xxx Second(s) Between IR Commands (Default 3s, Range From 1s To 180s)
IROFFRPT x Set x Number Of Times IR O Command Is Repeated (Default 1 Time, Range 1 To 2 Times)
IROFFRPTDLY xx Set Sending Interval Time To xx Second(s) Between IR O Commands
AUTOONCECINPUT yy Enable CEC input select for Auto ON Macro to input yy
yy = 00: O
yy = [01-04]: Input Select
OUT CEC ENABLE Enable CEC
OUT CEC DISABLE Disable CEC
OUT CEC INPUT yy Send Output CEC Input yy Command
OUT CEC PON Send Output CEC Power On Command
OUT CEC POFF Send Output CEC Power O Command
OUT CEC VOLUP Send Output CEC Vol Up Command
OUT CEC VOLDOWN Send Output CEC Vol Down Command
OUT CEC MUTE Send Output CEC Mute Command
RS232BAUD z Set RS232 Baud Rate To xx
z = 1 2400, 2 4800, 3 9600, 4 19200, 5 38400, 6 57600 (Default), 7 115200
RS232ON x:y:z:a Send y Type Of Command a Stored In Slot x Whose Baud Rate Is z - Note: will disable other RS232 feedback
x = 1 Send RS232 Display On
x = 2 Send RS232 Display Input Select
x = 3 Send RS232 User Command 1
x = 4 Send RS232 User Command 2
y = a ASCII, h HEX
z = 1 2400, 2 4800, 3 9600, 4 19200, 5 38400, 6 57600 (Default), 7 115200
a = RS232 Command - Note: to insert a carriage return in a command use \r
RS232ON DISABLE Disable Auto RS232 Commands When Detecting A Signal
RS232OFF y:z:a Set RS232 O Command a Of y Type Whose Baud Rate Is z - Note: will disable other RS232 feedback
y = a ASCII, h HEX
z = 1 2400, 2 4800, 3 9600, 4 19200, 5 38400, 6 57600 (deDault), 7 115200
a = RS232 command - Note: to insert a carriage return in a command use \r
RS232OFF DISABLE Disable Auto RS232 Commands When Not Detecting A Signal
RS232DLY xxx Set Sending Interval Time In xxx Seconds Between RS232 Commands
RS232RPT x Set x Number Of Times RS232 OFF Command Is Repeated
RS232RPTDLY xx Set Sending Interval Time In xx Second(s) Between RS232 OFF Commands (Default 2s, Range From 1s To 10s)
