Blu Stream DA11AU Manuale utente

DA11AU QUICK REFERENCE GUIDE

01contact support@blustream.co.uk / support@blustream.com.au

Our DA11AU has been designed to convert unbalanced or balanced 2ch analogue

audio to Dante® digital signal. The DA11AU allows any non-Dante® audio source

such as mixing consoles, amplifiers, computers and Blustream Matrix products or

distribution products to be connected as a source within a Dante® network. The

DA11AU is a plug & play device that is powered using PoE (Power Over Ethernet)

from any PoE network switch and supports AES67 RTP audio transport.

Introduction

• Analogue audio inputs support both balanced and unbalanced audio signals

• Supports 44.1, 48 & 96 KHz sample rates @ 24 Bit

• Configurable Dante® device latency (supports 1, 2 or 5ms configurable using Dante® Controller)

• Supports AES67 RTP audio transport

• Features Class 1 802.3af PoE for powering of product from any PoE switch

DA11AU

Quick Reference Guide

FEATURES:

Connections:

1Dante® Audio Output - RJ45 socket connets to your Dante® network.

2Audio Input - Phoenix Connector accepts balanced or unbalanced 2 channel audio input.

Front Panel

Rear Panel

DA11AU QUICK REFERENCE GUIDE

02 www.blustream.co.uk

Dante Controller

Dante Controller soware is required in order to setup and configure the DA11AU as well as control your Dante

network. Audinate provide extensive training videos and documentation on their website. This can be found here:

http://www.audinate.com/products/soware/dante-controller

Upon connecting your DA11AU to a compatible network, the Dante Controller soware should automatically

discover the device. The DA11AU will appear in the Dante Controller with a name denoted with “BLS”. On the

“Routing” screen you can create audio routing between Dante transmitters and receivers in your system.

By default the DA11AU is shipped with its network settings set to obtain an IP Address automatically. This means

that if a DHCP server is present on your network, it will provide the DA11AU with an IP Address. If no DHCP server is

present then the DA11AU will receive a default IP Address in the 169.254.xxx.xxx range. To change the IP Address of

the DA11AU, you must enter the “Network Config” menu in the “Device Info” screen of the Dante Controller soware.

DA11AU QUICK REFERENCE GUIDE

03contact support@blustream.co.uk / support@blustream.com.au

RevA0_QRG_HD12DB_190606_Web Layout

Advanced Dante Settings

It is also possible to change the settings of the DA11AU under the “Device Info” screen in the Dante Controller

soware. To do so, select the “Device Config” menu.

Here we can adjust the sample rate of the DA11AU. Please note that Dante products can only transmit or receive

audio from other Dante products that are set up with the same sample rate. A mismatch in sample rate may stop

audio from transmitting.

Under the “Device Config” screen we can also adjust the latency of the DA11AU from 1, 2 or 5 milliseconds.

Depending on your audio input device, it may be necessary to adjust the Input Sensitivity of the DA11AU.

Under the “Controls” screen we can adjust the input sensitivity of each channel from the default of +24dBu to

-10dBV.

DA11AU QUICK REFERENCE GUIDE

04 www.blustream.co.uk

Specifications

Audio Input Connectors: 6-PIN Phoenix connector (2ch balanced/un-balanced analogue audio)

Audio Output Connectors: 1 x RJ45, female (100 Mbps Dante® network)

Casing Dimensions (W x H x D): 120mm x 23mm x 34mm

Shipping Weight: 0.2 Kg

Operating Temperature: 32°F to 104°F (0°C to 40°C)

Storage Temperature: - 4°F to 140°F (- 20°C to 60°C)

Power Supply: Class 1 IEEE 802.3af POE PD

Package Contents

• 1 x DA11AU

• 1 x Quick Reference Guide

Acknowledgements

Dante® is a registered trademark of Audinate Pty Ltd.

Example Schematic

Indice

Altri manuali Blu Stream Convertitore multimediale

Blu Stream

Blu Stream DA11AEN Manuale utente

Blu Stream

Blu Stream SC11HD-V2 Manuale utente

Blu Stream

Blu Stream HEX11WP-TX Manuale utente

Blu Stream

Blu Stream IP100UHD-TX Manuale utente

Blu Stream

Blu Stream MX44VW Manuale utente

Blu Stream

Blu Stream SP14CS Manuale utente

Blu Stream

Blu Stream DAC13DB Manuale utente

Blu Stream

Blu Stream Dante DA44AU Manuale utente

Blu Stream

Blu Stream HD12DB Manuale utente

Blu Stream

Blu Stream DA22XLR-WP Manuale utente

Blu Stream

Blu Stream DA22XLR-WP-US Manuale utente

Blu Stream

Blu Stream DAC11AU Manuale utente

Blu Stream

Blu Stream Dante DA11D Manuale utente

Blu Stream

Blu Stream HDCP11AB Manuale utente

Blu Stream

Blu Stream SP12CS Manuale utente

Blu Stream

Blu Stream SP12AB-V2 Manuale utente

Blu Stream

Blu Stream SP14AB-V2 Manuale utente

Blu Stream

Blu Stream BluStream HD11AU Manuale utente

Blu Stream

Blu Stream HMXL44CS-KIT Manuale utente

Blu Stream

Blu Stream HMXL42ARC Manuale utente

Blu Stream

Blu Stream DAC12A U Manuale utente

Blu Stream

Blu Stream Multicast ACM200 Manuale utente

Blu Stream

Blu Stream HEX70HDU-KIT Manuale utente

Blu Stream

Blu Stream DIG11AU Manuale utente

Manuali Convertitore multimediale popolari di altre marche

SoundTraxx

SoundTraxx Blunami BLU-2200 Manuale utente

SPROLINK

SPROLINK VA1 Manuale utente

Acclaim Lighting

Acclaim Lighting DDC-1-AC Manuale utente

Nikon

Nikon AF-S TC-20E III Manuale utente

Axis

Axis AXIS Q7406 Manuale utente

Omega

Omega TAC80B-J Manuale utente

Zoom

Zoom Thunderbolt TAC-2R Manuale utente

OST

OST iConverter 10/100M Manuale utente

Vertiv

Vertiv Netsure Manuale utente

birddog

birddog MINI Manuale utente

Roland

Roland GI-10 Manuale utente

Wallenstein

Wallenstein WX310 Manuale utente

Pace

Pace MSS 200-1 Manuale utente

Solar Converters

Solar Converters EQ 12/24-50 Manuale utente

CYP

CYP EL-7400V Manuale utente

TIE

TIE MIDI 1i1o Manuale utente

DCS

DCS Vivaldi Upsampler Manuale utente

Westermo

Westermo MCW-211 SERIES Manuale utente