IP500UHD-TZ QUICKREFERENCE GUIDE
03Contact: support@blustream.com.au|support@blustream-us.com|support@blustream.co.uk
IP500UHD-TZTransmitter/ReceiverModeConfiguration
AllIP500UHD-TZ Transceiversareconfiguredby defaultintoTransmitter/Encodermode.Totogglebetween
Transmitter/Encoderand Receiver/ Decodermode,pressand hold the MODE buttononthefrontpaneloftheunit
for10 seconds.Aer the unit reboots,the OLED display will then show the producthas switchedtoReceiver / Decoder
mode.Themodecanalso be configuredvia the ACM500.Pleasesee the ACM500UserManual,downloadablefromthe
Blustreamwebsite,formoreinformationon how tocomplete this.
TheIP500UHD-TZ OLED display will show dierentinformation,ormenusystem, depending on whatmodeisselected.
Thedisplaywillturnoaer30 secondsof inactivity.The tablebelow outlines all of the configuration settings:
Transmitter / Encoder Mode Receiver / Decoder Mode
Front Display:
1stlineshowsTXname(doesnotscroll),eg:
•TX:Transmitter001
2ndlinescrollsthroughTXIPandTXIDevery5 seconds,eg:
•TX:IP169.254.3.1 •TX:ID001
Front Display:
1stlinescrollsthroughRXName,RXID, and RXIPevery 5
seconds,eg:
•RX:Receiver001 •RX:ID 001 • RX:IP169.254.6.1
2ndlinescrollsthroughtheTXinformationbeingviewed: TX
Name,TXID,andTXIPevery5 seconds,eg:
•TX:Transmitter001 •TX:ID001 •TX:IP169.254.3.1
PressandholdUP and DOWNbuttons for5secondstoentertheLocal Configmenu
Local Config:
•TransmitterID
Thiswillsetthe Transmitter ID aswell as itsrelated IP addresses
eg:ifIDis setto004, newIPandSSIPaddresseswillbe
169.254.3.4and169.254.103.4 respectively.
Local Config:
•ReceiverID
ThiswillsettheReceiverIDaswellasitsrelatedIPaddresseseg:
ifIDis set to003, newIP andSSIPaddresseswillbe169.254.6.3
and169.254.106.3respectively.
PressandholdUP and DOWNbuttons for5secondstoconfirm thenew ID
PressandholdUP buttonfor5secondstoentertheTXorRXConfigsubmenu
TX Sub Menu Config:
•Audio •F/W Info • SFP Info
•IPInfo •EDID
RX Sub Menu Config:
•Scaler •F/W Info •SFPInfo
•IPInfo •ViewingMode •MaxChannel
UseUpand DOWN buttonstohighlighttheitemtobeselected
PressandholdUP and DOWNbuttons for5secondstoenterthesubmenu
F/W Info:
•SDVoE:1.2.0.2 •GUI:1.10.04
•MCU:1.10.20 •Back
F/W Info:
•SDVoE:1.2.0.2 •GUI:1.10.04
•MCU:1.10.20 •Back
SFP Info:
•MAC:6CDFFB000203 •Gateway:169.254.100.1
•Subnet: 255.255.0.0 •169.254.103.1
•Back
SFP Info:
•MAC:6CDFFB000203 •Gateway:169.254.100.1
•Subnet: 255.255.0.0 •169.254.106.1
•Back
IP Info:
•MAC:6CDFFB000202 •Gateway:169.254.100.1
•Subnet: 255.255.0.0 •IP:169.254.3.1
•Back
IP Info:
•MAC:6CDFFB000202 •Gateway:169.254.100.1
•Subnet: 255.255.0.0 •IP:169.254.3.1
•Back
EDID:
•00:1080p 2ch • 01:1080p5.1ch
•02:1080p 7.1ch • 03:1080i2ch
•04:1080i 5.1ch • 05:1080i7.1ch
•06:1080p 3D 2ch •07:1080p 3D5.1ch
•08:1080p 3D 7.1ch •09:4k30 4442ch
•10:4k30 444 5.1ch •11:4k30 4447.1ch
•12:4k60 420 2ch •13:4k30 420.1ch
•14:4k30 420 7.1ch •15:4k60 4442ch
•16:4k60 444 5.1ch •17:4k60 4447.1ch
•18:4k60 444 2chHDR •19: 4k604445.1ch HDR
•20:4k60 444 7.1chHDR •Back
Scaler:
•00:Passthrough •01:720x480@604:3
•02:720x480@60 16:9 • 03:720x576@504:3
•04:720x576@50 16:9 • 05:1280x720@24
•06:1280x720@25 • 07: 1280x720@30
•08:1280x720@50 • 09: 1280x720@60
•10:1920x1080@24 • 11: 1920x1080@25
•12:1920x1080@30 • 13: 1920x1080@50
•14:1920x1080@60 • 15: 3840x2160@24
•16:3840x2160@25 • 17: 3840x2160@30
•18:3840x2160@50 • 19: 3840x2160@60
•20:4096x2160@24 • 21: 4096x2160@25
•22:4096x2160@30 • 23: 4096x2160@50
•24:4096x2160@60 • Back
Audio:
•AutoAudio •HDMIAudio
•AnalogueAudio. •Back
Max Channel:
•MAX TX:000-x(wherexis the maxchannelsthatan Rx can
scrollthrough,and000isthe ablitytoview all channels/TX's)
•Back
Viewing Mode
•'MATRIX'or'VIDEOWALL'or'MULTIVIEW'
•Back
Settings menuwilltime out andreturntomaindisplayaer20secondsofinactivity
