Blue Seal E91 Manuale utente
Manuals and Documents
Brought to you by
Wechillit.com Ltd
WCI Group House
18 Pride Hill
Shrewsbury SY1 1DQ
Tel: 01743 289418
Fax: 01743 289416
Web: www.wechillit.com
©Moffat Ltd, January 2007
Revision 1/
Blue Seal Evolution Series Electric Salamander
Electric Salamanders
E91
Service Manual
©Moffat Ltd, January 2007
Revision 1/
Blue Seal Evolution Series Electric Salamander
ALL INSTALLATION AND SERVICE REPAIR WORK MUST BE CARRIED OUT BY
QUALIFIED PERSONS ONLY.
WARNING:
MAKING ALTERATIONS MAY VOID WARRANTIES AND APPROVALS.
IMPORTANT:
©Moffat Ltd, January 2007
Revision 1/
Blue Seal Evolution Series Electric Salamander
This manual is designed to take a more in depth look at the E91 Salamander for the purpose of
making the units more understandable to service people.
There are settings explained in this manual that should never require to be adjusted, but for completeness
and those special cases where these settings are required to change, this manual gives a full explanation
as to how, and what effects will result.
Section Page Number
1. Specifications ............................................................................................ 1
2. Installation ................................................................................................ 3
3. Operation ................................................................................................... 6
3.1 Description of Controls
3.2 Racking
4. Cleaning / Maintenance ............................................................................ 7
5. Trouble-shooting Guide............................................................................. 8
6. Service Procedures .................................................................................... 9
6.1 Access
6.2 Replacement
7. Accessories .............................................................................................. 12
8. Exploded Parts Diagrams ........................................................................ 13
9. Circuit Schematic..................................................................................... 15
10. Wiring Diagram........................................................................................ 16
11. Service Contacts ...................................................................................... 17
Appendix A. Mounting Hole Locations ........................................................... 19
Contents
©Moffat Ltd, January 2007
Revision 1/
Blue Seal Evolution Series Electric Salamander
1
1
Specifications
©Moffat Ltd, January 2007
Revision 1/
Blue Seal Evolution Series Electric Salamander
External Dimensions
Model Numbers Covered in this Specification
E91 Electric Salamander
Front
Side
Plan
2
1
Specifications
©Moffat Ltd, January 2007
Revision 1/
Blue Seal Evolution Series Electric Salamander
Salamander Internal Dimensions
Rack Size 610mm x 310mm
Branding Plate (accessory) 610mm x 310mm
Cooking Area
E91 41kg
Weight (Net)
Width Depth
Height
E91 685 mm 330 mm 230 mm (at front)
Voltage 220-240Vac, 1P+N+E
Power (@ 240Vac) 6.0 kW, 25A
Electrical Requirements
3
2
Installation
©Moffat Ltd, January 2007
Revision 1/
Blue Seal Evolution Series Electric Salamander
Installation Requirements
NOTE: It is most important that this salamander is installed correctly and that operation is
correct before use. Installation shall comply with local electrical, health and safety
requirements.
Blue Seal Salamanders are designed to provide years of satisfactory service, and correct installation is
essential to achieve the best performance, efficiency and trouble-free operation.
This appliance must be installed in accordance with National installation codes and in addition, in
accordance with relevant National / Local codes covering electrical and fire safety.
Australia / New Zealand AS/NZS3000 - Wiring Rules.
United Kingdom: BS 7671 - Requirements for Electrical Installations.
Installations must be carried out by authorised persons only. Failure to install equipment to
the relevant codes and manufacturer’s specifications shown in this section will void the
warranty.
Unpacking
1. Remove all packaging and transit protection from the appliance including all protective plastic
coating from the exterior stainless steel panels.
2. Check equipment and parts for damage. Report any damage immediately to the carrier and
distributor.
3. Check that the following parts have been supplied with the Salamander:
4. Report any deficiencies to the distributor who supplied the unit.
5. Check that the available electrical supply is correct to that shown on the rating plate located on the
front bottom corner of the right hand side panel.
Location
1. This appliance must be mounted onto a non-combustible wall or tailored stand, using the rear wall
bracket and spacing screws provided.
2. Combustible walls must not protrude past the front of the appliance.
3. This appliance must not be mounted on a combustible surface or metal surface, as radiated heat will
cause these surfaces to become extremely hot.
4. Caution should be taken as intense heat is emitted at the bottom front of the appliance.
5. The unit should be mounted under an extraction hood in compliance with all local regulations.
In the event that the unit is not mounted under an extraction hood, the installer must ensure
that all regulations are met and that there is an unobstructed minimum distance of 750 mm
from the top surface of the unit to the ceiling, which must be of non-combustible material.
NOTE: Do not obstruct or block the appliances flue. Never directly connect a ventilation
system to the appliance flue outlet.
1 x Salamander Rack. 1 x Wall Mounting Bracket, including;
1 x Crumb Tray. - 2 x 25mm Black Plastic Spacers.
-2x3/8” Bolts / Nuts.
4
2
Installation
©Moffat Ltd, January 2007
Revision 1/
Blue Seal Evolution Series Electric Salamander
Clearances
This unit must be installed on a non-combustible wall or tailored stand with the following clearances:-
Wall Mounting (to non-combustible wall only)
NOTE: Only non-combustible materials can be used in close proximity to this appliance.
1. Fix the wall mounting bracket to the wall
with six screws, in such a position that the
top of the bracket is level and at least 945
mm (38”) above any surface beneath the
unit. This will ensure that the bottom of the
Salamander is at least 600 mm (24”) above
any surface.
2. Fit the two black plastic spacers to the top
rear corners of the unit. Leave them
unscrewed by approximately 5 mm.
3. Fit the two adjusting screws / bolts into the
nutserts at the bottom rear corners of the
unit. These should protrude approximately
30 mm from the rear of the Salamander.
4. Lift the Salamander onto the wall bracket,
lining up the black plastic spacers on the
salamander with the mounting notches in the
bracket.
5. Lower the Salamander onto the mounting bracket.
6. Tighten the black spacers securely and adjust the
levelling screws/bolts to ensure that the unit is level.
~ 5mm
~30mm
Combustible Surface Non-Combustible Surface
Left/Right hand side 50mm 0mm
Rear 50mm 0mm
Top Clearance to;
Extraction Hood 200mm
Ceiling (subject to all local regulation requirements) 300mm
5
2
Installation
©Moffat Ltd, January 2007
Revision 1/
Blue Seal Evolution Series Electric Salamander
Electrical Connection
When connecting a Blue Seal electric appliance to the main supply, ensure that the following is
carried out:-
•An isolating switch is fitted within 2 m of the appliance, but not on the appliance and in such a
position that the user does not have to reach across the cooking surface.
•Supply cord shall be oil-resistant, sheathed flexible cable and not lighter than ordinary poly-
chloroprene or other equivalent synthetic elastomer sheathed cord (as per AS/NZS 3191 part
2.10.11. or IEC 60245-IEC-57) e.g. HO5 RN-F Type.
•The branch supply line shall be individually overload protected to the correct current rating and
the supply chord shall be protected against any mechanical or thermal damage.
•A grommet is fitted around the wiring entry hole into the appliance.
•All wiring connections must be tight.
Refer to the appropriate wiring standards for the size of cable that is to be supplied to an appliance for
the current drawn on that line.
NOTE: ALL ELECTRICAL CONNECTIONS MUST ONLY BE CARRIED OUT BY AN AUTHORISED PER-
SON.
1. Remove either the left or right hand side panel to allow access to the electrical connection terminal block.
Fit the cable through the small grommet located at the rear of the unit and connect to the terminals as
marked.
2. If required, the appliance can be connected to two 13 or 15 amp single phase supplies by removing the
insulated wire loom between the left and right hand terminal blocks. Independent supplies can then be
connected to each side.
3. The operating voltage of the
salamander is stated on the rating
plate affixed to the right hand side
panel front bottom corner. This in-
formation is also shown in the
“Specifications” Section of this man-
ual. Ensure that the available volt-
age is correct.
NOTE:
•This appliance must be grounded / earthed.
•Fixed wiring installations must incorporate an all-pole disconnection switch.
Commissioning
1. Before leaving the new installation, check that all the connections are correct and, and that the unit func-
tions in accordance with the operating instructions.
2. Check the current draw and loading for the equipment. Refer specification section for correct
electrical requirements.
NOTE:
•• If for some reason it is not possible to get the unit to operate correctly, turn off the elec-
trical power supply and contact a qualified service person. The supplier of this unit will be
able to recommend a suitable person.
•Make sure that the electrical supply is turned off before any service or maintenance work
is carried out.
Rating Plate
WARNING:
THIS APPLIANCE MUST BE EARTHED. IF THE SUPPLY CORD IS DAMAGED,IT MUST BE REPLACED BY A SUITABLY
QUALIFIED PERSON IN ORDER TO AVOID A HAZARD.
Altri manuali per E91
1
Indice
Altri manuali Blue Seal Griglia
Blue Seal
Blue Seal Evolution G594 Manuale
Blue Seal
Blue Seal G91 Manuale utente
Blue Seal
Blue Seal Evolution G592 Guida all'installazione
Blue Seal
Blue Seal Evolution G592 Manuale utente
Blue Seal
Blue Seal Evolution G592 Manuale utente
Blue Seal
Blue Seal Evolution Series Manuale utente
Blue Seal
Blue Seal G91 Manuale utente
Blue Seal
Blue Seal E91 Manuale utente
Blue Seal
Blue Seal Evolution G592 Manuale utente
Blue Seal
Blue Seal Evolution G592 Manuale utente
