Blueair Sense Manuale utente
Blueair Sense 1
User Manual
Blueair Sense
2 Blueair Sense
Welcome
Thank you for choosing Blueair. Before you start using your Blueair air
purifier, take a few minutes to become familiar with the basics.
Filter replacement
Be sure to change your Blueair filter according to the recommended filter
replacement schedule. This helps keep your Blueair air purifier running in
top condition. See page 7.
Extend your warranty
Complete and send your warranty card to Blueair today to extend your
limited warranty.
Help keep the planet healthy, too
Blueair air purifiers provide maximum improvement of indoor air quality with
minimum impact on the environment. The entire unit can be recycled.
Contents
2 Welcome
3 Getting started
5 Getting the most from your Blueair system
6 Changing the filter
7 Filters
English
Blueair Sense 3
Getting started
General safety instructions
The Blueair Medineed air purifier is an electrical appliance. Please read the
safety instructions before use and take the necessary precautions to reduce
the risk of fire, electric shock or injury. The Blueair Limited Warranty applies
only if the unit is used according to these instructions.
• Use the grounded power cable provided with your Blueair unit. The plug
fits into a grounded outlet. Do not alter the plug in any way.
• Use the cable provided to plug the Blueair unit directly into an
appropriate electrical outlet (please refer to the voltage label on your
unit). The cable is packaged beneath the unit.
This appliance is not intended for use by persons (including children) with
reduced physical, sensory or mental capabilities, or lack of experience and
knowledge, unless they have been given supervision or instruction concerning
use of the appliance by a person responsible for their safety.
Children should be supervised to ensure that they do not play with the
appliance. If the supply cord is damaged, it must be replaced by the
manufacturer or its service agent or similarly qualified persons in order to
avoid a hazard.
Placement
Place the unit in a location that allows air to circulate freely in, out and
around the unit. The minimum acceptable distance from another object is
4˝ or 10 cm. Use only genuine Blueair filters. Do not place the unit:
Directly on or against soft furnishings, such as bedding or curtains.
Near sources of heat, such as radiators, fireplaces or ovens.
Near wet areas, such as bathrooms or laundry rooms, where it may come into
contact with water.
Outdoors.
English
4 Blueair Sense
English
Settings
Plug the power cable firmly and completely into the recessed power cord
socket located at the bottom of the unit and plug the other end into a
grounded wall outlet or power strip.
Turn on your Blueair unit by sweeping your hand over the display, which is
positioned in the center of the top. The blue light-emitting diode on the
unit’s front side indicates that the unit is working.
Set the unit to maximum speed by sweeping over the display until it shows
three blue rings. This is recommended for fast initial cleaning, daytime use, or
very polluted air. After a few minutes, set the unit to the desired speed. Mi-
nimum speed is generally recommended for nighttime use.
Display function
CHANGE
FILTER
Display is on standby for
energy saving.
Speed setting 1.
Speed setting 2.
Speed setting 3.
When filter replacement is required,
a red replacement filter light will
light up.
Blueair Sense 5
How it works
Air is drawn in to the air purifier where airborne particles and gaseous pol-
lutants are captured in the HEPASilent Plus™ pre-filter. The air then passes
through an ion chamber and remaining particles are charged with negative
ions. The charged particles are drawn to the HEPASilent Plus™ filter surfa-
ce and purified air, virtually contaminant-free, is re-circulated into the room.
Care and maintenance
Blueair air purifiers feature high quality design, materials and workmanship.
To keep your unit in top condition, we recommend routine cleaning. The
appliance must be disconnected from the supply mains before cleaning or
maintenance.
• Vacuum the air intake grille from the inside when you remove the filter to
replace it.
• Vacuum the small inlets with a soft brush attachment.
• Wipe the exterior of the unit with a soft, clean, damp cloth.
• Never clean with gasoline, chemical solvents or corrosive material also
as these agents may damage the surface.
• Do not allow foreign objects to enter the ventilation or exhaust openings.
This may cause electric shock or damage the unit.
• Do not try to repair or adjust any of the electrical or mechanical functions
on your Blueair unit yourself. Contact your local dealer or Blueair for
warranty information.
English
6 Blueair Sense
Getting the most from your
Blueair system
The Blueair system is easy to use. Make sure your unit is the right size for
your room, and change the filter according to the recommended filter re-
placement schedule. Remember that, just as air conditioners and heaters
have limits to the volume of air they can cool or heat, every air purification
system has limits to the volume of air it can clean. Follow these common-
sense guidelines.
Close your windows
You wouldn’t throw open your windows on a hot summer day and expect
your air conditioner to work efficiently, because you can feel the hot air co-
ming in and the cool air going out. Even though you can’t see the
contaminated air coming in and the clean air going out, the same logic
applies to your air purifier.
Close your doors, too
Just as you might seal off part of your house on a cold winter night to keep
your heater working more efficiently, seal off the room in which your system
is working for best results. This is especially important for people using a
Blueair system to ease nighttime asthma or allergy attacks.
Run your system 24 hours per day
For best results, run your Blueair unit 24 hours a day, 7 days a week.
Round-the-clock operation ensures that a continuous supply of clean,
filtered air constantly circulates throughout the room. Blueair systems are
designed for phenomenally low power usage. In fact, it costs about the
same to power a Blueair air purifier as it does to power a single light bulb,
depending on the unit and the operating speed.
English
Blueair Sense 7
English
Changing the filter
Step 3
Step 2
Step 1
Turn off the unit, pull out the
plug and put the unit down
with the backside facing up.
Pull out the filter cassettes
using the handles.
Pull out the particle filters and
carbon filter sheets from
each cassettes.
8 Blueair Sense
Step 4
Step 5
Push in the new filters in
each cassettes.
Make sure that the carbon
filter sheets stay in place by
pressing down the filters
below the tags on the
cassettes.
English
Step 6
Slide in the filter cassettes
back in place
Blueair Sense 9
CHANGE
FILTER
Step 7
Plug in the power cord,
stand the unit up and touch
the red filter replacement
light. Your Blueair is now
ready to once again give
you cleaner, healthier air.
English
10 Blueair Sense
Filters
Patented HEPASilent Plus™ technology makes the Blueair Sense incredi-
bly quiet. The unit comes with HEPASilent Plus™ filters already installed,
including one prefilter and one main filter.
Pre-filter. The pre-filter removes dust, pollen, pet dander and other large
airborne particles.
Main filter. This filter removes all airborne pollutants including dust, pollen,
pet dander, bacteria, mold spores, viruses and other airborne particles. The
filter is made of polypropylene, which help mechanically filter out airborne
particles. To maximize filter effectiveness, particles are negatively charged
by the Blueair unit before reaching this filter.
The filters also include active carbon filter sheets to remove gaseous pollu-
tants such as cigarette and cigar smoke or other VOCs (volatile organic
compounds, including household paints and other chemicals).
For optimal performance, Blueair recommends that you replace the
filter every six (6) months.
We offer a convenient Filter Subscription Program in some countries.
Contact your local dealer or Blueair to find out whether the program is avai-
lable to you.
IMPORTANT! Use only genuine Blueair filters to ensure proper function of
your unit and to qualify for full warranty coverage.
English
Customer’s record
The model number and serial number of this product can be found on the bottom of the
unit. Please note them in the space provided below and keep for future reference.
Model number Dealer’s name
Serial number Dealer’s address
Date of purchase Telephone number
Altri manuali per Sense
5
Indice
Altri manuali Blueair Purificatore d'aria
Blueair
Blueair Blue Pure 511 Manuale utente
Blueair
Blueair Airpod Manuale utente
Blueair
Blueair Cabin P2i Manuale utente
Blueair
Blueair DustMagnet 5210i Manuale utente
Blueair
Blueair 400 series Manuale utente
Blueair
Blueair 501 Manuale utente
Blueair
Blueair 400 series Manuale utente
Blueair
Blueair 200 Series Manuale utente
Blueair
Blueair Protect 7300 Series Manuale utente
Blueair
Blueair Blue Pure 411i Max Manuale utente
Blueair
Blueair Classic 480i series Manuale utente
Blueair
Blueair Blue PURE 411 Manuale utente
Blueair
Blueair 500 Series Manuale utente
Blueair
Blueair Blue Pure 311i+ Max Manuale utente
Blueair
Blueair ECO10 Manuale utente
Blueair
Blueair HealthProtect 7400 Series Manuale utente
Blueair
Blueair Blue PURE 211 Manuale utente
Blueair
Blueair 3210 Manuale utente
Blueair
Blueair Classic 200 series Manuale utente
Blueair
Blueair Blue 3250i Manuale utente
