BlueParrott S450-XT Manuale utente

BlueParrott

S450-XT

User Manual

BlueParrott S450-XT User Manual PAGE 2

Safety Information ........................................................................................................................ 3

What’s in the Box .......................................................................................................................... 3

Headset Overview......................................................................................................................... 4

How to Wear ................................................................................................................................. 5

• Adjusting the Earpieces

• Positioning the Microphone

Charging the Headset................................................................................................................... 5

Getting Started.............................................................................................................................. 7

• Turn Headset On/Off

• How to Connect

– NFC Pairing to a Bluetooth®Device

– Regular Pairing to a Bluetooth Device

– Connecting with a 3.5 mm Jack Connector

– Connecting via USB

• How to Use

– Listening to Media

– Making/Taking Calls

Advanced Bluetooth®Features and Functions .....................................................................10

• Multiple Device Pairing

• Multipoint Mode

• Additional Features and Functions

– Last Number Redial

– Call Waiting/Rejecting a Call

– Rejecting a Call

– Phone Voice Control (e.g. Siri®or Google NowTM)

– Muting

– Turning Indicator Lights On/Off

– Resetting Paired Devices List

Bluetooth®Mode Functions & Indicators Tables ..................................................................12

Configuring the Parrott ButtonTM and Updating Your S450-XT..........................................15

TABLE OF CONTENTS

BlueParrott S450-XT User Manual PAGE 3

SAFETY INFORMATION

WHAT’S IN THE BOX

IMPORTANT SAFETY NOTE: Prolonged exposure to high volume levels can damage your

hearing. To avoid injury, set the volume to the lowest comfortable level. If you experience

ringing in your ears, or voices sound muffled, stop using the headset. Avoid turning up the

volume to block noisy surroundings. It’s possible for your ears to adapt to volume that is too

high, and this could result in permanent hearing damage without any noticeable discomfort.

• Check with local and state laws regarding cell phone/headset usage while operating a

motor vehicle.

• Do not immerse any part of this product in water.

• Plastic bags and small parts may cause choking if ingested. Keep them away from small

children and pets.

• Use only the power cords included with this product.

• Avoid temperatures exceeding 140° F (will cause equipment failure).

A. BlueParrott S450-XT Headset

B. Premium Carrying Case

C. Micro-USB Cable

D. 3.5 mm Audio Cable

E. Quick-Start Guide*

F. Warranty and Compliance Insert*

*Not pictured.

Images are not shown to scale.

BlueParrott S450-XT User Manual PAGE 4

HEADSET OVERVIEW

A. Parrott Button

B. Multi-Function Button (MFB)

C. Volume Up

D. Volume Down

E. Power On/Off and Status LED

F. Track Back

G. Micro-USB Port

H. 3.5 mm Jack Connector

I. Track Forward

J. Microphone Boom

BlueParrott S450-XT User Manual PAGE 5

HOW TO WEAR

Adjusting the Earpieces

Adjust the earpieces for a comfortable fit by

lengthening or shortening the headband.

Positioning the Microphone

Rotate the microphone down when you need to use it.

Align the tip

of the boom with the corner of your mouth for best

performance.

CHARGING THE HEADSET

Battery Power Indicators

While charging, the indicator light

shows the charge status of your

S450-XT.

Blue light: Fully charged with 24 hours’

wireless talk/media time.

Red light: Charging.

Indicator Light

Location

Connect the USB charger cord into the S450-XT’s USB charging port. If the headset is

not fully charged, the indicator will turn red. When the indicator turns blue, and stays

blue, S450-XT is fully charged. A fully discharged battery will need approximately 4

hours to achieve a complete charge.

BlueParrott S450-XT User Manual PAGE 6

CHARGING THE HEADSET (continued)

Operation While Using the Charger/Adapter

Your S450-XT headset can be operated while charging.

If you connect the S450-XT to a charger while it is connected via Bluetooth, the headset

will reset and shut off.

To turn it back on, slide the switch to the “off” position (if not already done) and then back

to the “on” position. This will re-activate the Bluetooth and S450-XT should reconnect to

your device.

If you connect the S450-XT to a USB port on your computer, it will function as a USB

headset and Bluetooth functionality will be disabled. The headset will continue to charge

while in use.

Note: Do not attach the charger during a call. This will cause the headset to reset, and the

call will be sent back to the phone.

BlueParrott S450-XT User Manual PAGE 7

GETTING STARTED

Power S450-XT On/Off (Bluetooth Mode)

On: Slide the switch up toward the headband. The LED will flash blue three times and

you will hear a voice prompt, “Power on.” If your S450-XT is not already paired with a

device, it will automatically go into pairing mode; otherwise, it will attempt to connect

with its paired device(s).

Off (conserves battery power): Slide the switch down from the headband. The LED

will flash red four times and you will hear a voice prompt,“Power off.”

Standby Mode: Once the S450-XT is turned on (after the initial pairing), it will attempt

to connect to the last device that it was paired with, putting itself into Standby Mode.

How to Connect

NFC Pairing to a Bluetooth Device

1. Confirm that your cell phone supports NFC

pairing.

2. Make sure that NFC is enabled on your cell

phone.

3. Turn the S450-XT on.

4. Place the NFC zone of your cell phone against

the NFC zone of the S450-XT and hold

together while your cell phone registers the

headset.

5. Follow the prompts on your cell phone until it

confirms pairing is successful.

Note: NFC and one-touch pairing are dependent

on your cell phone. The size and sensitivity of your

phone’s NFC zone and how to connect the headset

may vary between devices.

NFC Zone

BlueParrott S450-XT User Manual PAGE 8

Regular Pairing to a Bluetooth Device

Placing the S450-XT into Pairing Mode

When you turn your S450-XT on for the first time, or if its Paired Device List has been

cleared, it will go into pairing mode automatically. If the S450-XT has already been paired

with another device and you are not going to use NFC Pairing, you will need to put it into

Pairing Mode manually:

Power on the headset and then press and hold the MFB for approximately 6 seconds

until you hear the audio prompt “discovering.” The headset LED will be flashing

alternating red and blue.

The S450-XT will be visible for pairing to devices for 120 seconds.

Pairing to a Cell Phone

1. Make sure that other Bluetooth devices are turned off or out of range.

2. Place the S450-XT into pairing mode.

3. Put your cell phone in Bluetooth Search/Scan Mode per the manufacturer’s instructions.

4. Select “BlueParrott S450-XT” to pair. (Passcode is “0000” if needed.)

5. When connected, the headset will give you the voice prompt,“Your headset is

connected” and the indicator light will flash blue.

Using Wired Audio

Connect the audio cable to the headset and to the 3.5 mm jack connector on your mobile

device or PC.

Note: Bluetooth and USB headset functionality are disabled when using the audio cable

connection.

Connecting via USB

Connect the S450-XT to a PC using the supplied micro-USB cable (the audio cable must

not be connected to the headset when using USB).

Note: It is not possible to connect to a mobile device wirelessly and to your PC via USB at

the same time. (Bluetooth functionality is disabled while there is an active USB connection.)

GETTING STARTED (continued)

BlueParrott S450-XT User Manual PAGE 9

GETTING STARTED (continued)

How to Use

Wireless Use

Listening to Media

Play/Pause

Quickly double-tap the MFB to play or pause.

Skip Tracks

To advance to the next track, briefly press the Track Forward button on the front of

the earpiece.

To go back a track, briefly press the Track Back button on the rear of the earpiece.

Making/Taking Calls

Your S450-XT headset must be on and connected to your phone via Bluetooth.

Making a Call

1. Dial the desired number on your phone. You will hear the call in the headset.

2. To end the call, press the MFB once. The call will end and the headset will enter

Standby Mode.

Answering a Call

1. When you receive a call, you will hear ring tones in the headset. Press the MFB once

to answer the call.

2. To end the call, press the MFB once. The call will end and the S450-XT will enter

Standby Mode.

Rejecting an Incoming Call

1. To reject an incoming call, press and hold the MFB for two seconds. You will hear

two descending tones and the call will be transferred to your voicemail (if available).

3.5 mm Jack Wired Use

Listening to Media

Use the provided 3.5 mm cable to listen to media when the battery is exhausted. The

S450-XT will be in passive mode and the microphone disabled.

Making/Taking Calls

It is not possible to use the headset for calls

when the 3.5 mm cable is connected.

USB Use

You can connect your S450-XT headset

to your computer via USB and use it as a

headset.

Note: Bluetooth connection is disabled

when the S450-XT is connected to your

computer as a headset.

Mute

Call Answer/End*

Volume Up

Volume Down

BlueParrott S450-XT User Manual PAGE 10

ADVANCED BLUETOOTH®FEATURES AND FUNCTIONS

Multiple Device Pairing and Multipoint Mode

The S450-XT has pairing memory for up to 8 devices. The headset can also use

Multipoint Mode, which means that it can be connected to two Bluetooth devices at

the same time.

Using the S450-XT in Multipoint Mode

1. To use the S450-XT in Multipoint Mode, first make sure the headset is paired with

both your devices.

2. With both devices in range and with their Bluetooth enabled, power on the S450-XT.

3. As each Bluetooth device connects to the S450-XT, you will hear the voice prompt,

“Your headset is connected.”

The S450-XT will monitor both phones and enable you to answer a call on either one

from the headset.

If you are on a call and the other device receives a call, you will hear a notification in

the headset.

Additional Features and Functions

Last Number Redial

To redial the last number that was dialed from the cell phone, press and hold the

Volume Down button for approximately 1 second. A beep will be heard and the phone

will redial the last number.

Call Waiting/Rejecting a Call

If you are on an active call and a second call comes in, you will hear a low tone

notification in the headset. If supported by your phone, you have the following

options:

• To accept the incoming call and end the active call, press the MFB once to end the

active call, and then once again to answer the incoming call.

• To accept the incoming call and place the active call on hold, quickly press the

MFB twice.

• To reject the incoming call, press and hold the MFB for 1-2 seconds.

Altri manuali per S450-XT

Indice

Altri manuali BlueParrott Cuffia

BlueParrott

BlueParrott C400-XT Manuale utente

BlueParrott

BlueParrott M300-XT Manuale utente

BlueParrott

BlueParrott B250-XT Manuale utente

BlueParrott

BlueParrott B550-XT Manuale utente

BlueParrott

BlueParrott B250-XTS Manuale utente

BlueParrott

BlueParrott C300-XT Scheda tecnica

BlueParrott

BlueParrott B250-XTS Manuale utente

BlueParrott

BlueParrott C400-XT Manuale utente

BlueParrott

BlueParrott B350-XT Manuale utente

BlueParrott

BlueParrott B450-XT Manuale utente

BlueParrott

BlueParrott B450-XT Scheda tecnica

BlueParrott

BlueParrott B450-XT Manuale utente

BlueParrott

BlueParrott B250-XT Manuale utente

BlueParrott

BlueParrott B550-XT Scheda tecnica

BlueParrott

BlueParrott B250-XT Manuale utente

BlueParrott

BlueParrott B250-XT Manuale utente

BlueParrott

BlueParrott M300-XT SE Manuale utente

BlueParrott

BlueParrott Point VXi Manuale utente

BlueParrott

BlueParrott C300-XT Manuale utente

BlueParrott

BlueParrott B650-XT Manuale utente

BlueParrott

BlueParrott B350-XT Manuale utente

BlueParrott

BlueParrott B350-XT Manuale utente

BlueParrott

BlueParrott B450-XT Manuale utente

BlueParrott

BlueParrott B550-XT Manuale utente

Manuali Cuffia popolari di altre marche

Sena

Sena SMH10 Manuale utente

IASUS

IASUS Stealth IA-NT4-BASIC-BT Manuale utente

Sennheiser

Sennheiser EPOS ADAPT 230 Manuale utente

Doro

Doro Flexus HS2005 Manuale utente

GE 98971 Manuale utente

Hama

Hama 00184070 Manuale utente

Plantronics

Plantronics Blackwire 3200 Series Manuale utente

Blue Tiger

Blue Tiger Advantage PLUS Manuale utente

Jawbone

Jawbone Icon Manuale utente

Jabra

Jabra FR 20 Manuale utente

Roxcore

Roxcore Flow A+ Manuale utente

Turtle Beach

Turtle Beach XP 510 Manuale utente

Philips

Philips SHB6101 Manuale utente

Jabra

Jabra PRO 9460 Duo Manuale utente

HyperX

HyperX HyperX Cloud Flight Manuale utente

Bose

Bose MIE2 Mobile Manuale utente

Jabra

Jabra Steel Manuale utente

HyperX

HyperX cloud ii Manuale utente