BLUEREV MOTO81 Manuale utente
U S E R M A N U A L
2
U S E R M A N U A L
CONTENTS
Welcome P a g e 3
Bike Parts Diagram Page 4
Safety Check P a g e 5
Using the Bike P a g e 6
Maintenance P a g e 6
Assembly P a g e 7
Battery Charging P a g e 9
Rear Suspension Page 10
SW900 COMPUTER DISPLAY Page 11
Cleaning and Tips Page 12
Legal Requirement Page 12
Serial Number Page 13
Warranty Page 13
Help Centre Page 14
3
U S E R M A N U A L
Congratulations on purchasing your new Bluerev Bike!
You have chosen wisely!
Your Bluerev bike will give you a superb riding experience for
many years to come.
Please read this manual carefully before using your bike it will
help you assemble your bike properly and keep your bike in
top condition, more importantly this will ensure your safety
while using the bike.
If you don’t feel comfortable assembling the bike on your own
it is highly recommended that you have your bike assembled
by a bicycle mechanic.
If you have any other questions please refer to the
BLUEREV website’s contact page to speak to us.
www.bluerev.ca
Email: [email protected]
Phone: 1-647-715-9000
THANK YOU FOR CHOOSING BLUEREV!
FRAME
SADDLE
RACK
REAR
LIGHT
CONTROLLER
SUSPENSION
SHOCKS
MOTOR
CRANKS
CHAIN
PEDAL
REAR
WHEEL
DERAILLEUR
BATTERY
HANDLEBAR
LED
FRONT
LIGHT
FENDER
FRONT
BRAKE
RIM
TIRE
INNER
TUBE
VALVE
4
U S E R M A N U A L
SHIFTER
THROTTLE
BRAKE
LEVER
DISPLAY
GRIPS
DISPLAY CONTROLS
5
U S E R M A N U A L
SAFETY CHECK BEFORE FIRST USE
Please check the following components: handlebar, stem, pedals, crank, wheels. Ensure they are properly installed and
tightened. While some of the components are pre-assembled, it is still important to make sure every component is
tightened at the indicated torque value. Failing to notice a loose component may cause it to detach during use and lead to
serious injury.
Wheels: A critical part of assembling your bike is securing the front and rear wheels and checking the tightness
of the wheel axle nuts. Properly installed wheels are essential to the safe use of the bike.
Tires: Both tires must be inated as specied in the manual. Failing to do so will reduce performance, increase
tire wear, and compromise your safety.
Crank: Ensure the crank (pedal arm) is tightened at the indicated torque value. (required tools: 8mm hex key,
recommended torque 40-42 N.m)
Brakes: Ensure brakes are working correctly and properly secured. When braking, apply the rear brake rst,
then the front brake. If brakes are not correctly applied, they may lock up and you may lose control.
It is recommended to perform the above safety checks every (200-300km)/(120-180miles) or if the
bike is not used for 3 weeks.
For Your Safety
Users must become accustomed to the power controls before riding. It is highly recommended that you ride your new
bike in an open area and set the power assist level to “0”. Once you feel condent operating your bike, increase the
power assist gradually.
Keeping your hands over the brake levers is good practice. The brake levers have motor inhibitors that will shut down
the motor power when applied. If for any reason you lose control, apply the brake levers immediately to shut down the
motor power. Do not try to stop your bike using your feet, as this may cause the user to lose balance.
When walking or carrying your bike, turn off the power to avoid accidentally switching on the motor. If the motor is
accidentally switched on, immediately apply the brakes to cut off the power to the motor.
6
U S E R M A N U A L
How the Bike works
Your new E-Bike has an internal controller that provides variable power to the motor(s) using 2 sensors for the Pedal Assist mode.
There is also a Twist Throttle Grip on the handlebars for pedal free riding.
Throttle: The handlebar twist throttle mechanism allows partial or full motor power to be activated. Unfamiliarized users should be
more cautious when rst pushing the throttle. The throttle function is deactivated when the pedal assist level is set to “0”.
Pedal Assist (Cadence Sensor): The cadence sensor activates the motor when the crank is in motion and provides
appropriate power to the motor.
Pedal Assist (Torque Sensor): The torque sensor activates the motor when pressure is applied to the pedals. Variable
power will be applied to the motor depending on the amount of pressure being put on the
pedals.
Maintenance
It is important to perform proper maintenance and often ne-tune your bike to ensure optimal performance and safe riding.
Regularly lubricate your chain, gear shifter, sprocket, and all moving parts. Always check the condition of your bike before riding
and make sure that it is well maintained. When in doubt, consult a bicycle mechanic for assistance!
Warning: If you do not have the experience, skill, or tools to complete maintenance or adjustment of your bike, it is highly
recommended to have a bicycle mechanic check your bike and ensure it is safe to ride.
Liability Disclaimer
There are risks associated with the use of any bike over time which cannot be predicted or avoided and are the sole
responsibility of the rider. You are responsible for your own actions while using an electric bike.
Bluerev is not responsible nor liable for any accidents or injuries (whether caused by you or others) that may occur
during your use.
We recommend contacting your insurance provider to determine if your current insurance policy
would cover you in the event of an accident.
USING THE BIKE
7
U S E R M A N U A L
ASSEMBLY
Handlebar (required tools: 5mm hex key)
Do not carry the bike or move the fork during the
handlebar assembly process. The fork must be fully
inserted into the frame.
1. Unscrew the retainer from the head tube.
2. Remove the silver spacer from the head tube.
3. Insert the handlebar stem into the head tube and
tighten the retainer. (recommended torque 8 N.m)
4. Align the handlebar with the front wheel and tighten
the two bolts on the side of the stem. (recommended
torque 12N.m)
Front Wheel
1. Remove the brake pad protector located between the brake
pads.
2. Assemble the wheel by inserting the disc brake rotor between
the brake pads, then insert the fork end onto the wheel axle.
3. Remove the nut and spring (A) from the quick release skewer
4. Insert the quick release skewer with spring (B) pointing inward
into the right side of the wheel axle.
5. Insert spring (A) pointing inward into the left side of the quick
release skewer and tighten the nut.
6. Close the quick release lever and tighten by turning
clockwise.
2. Remove silver
spacers
1. Unscrew !
retainer
(B)
(A)
3. Remove nut and spring
(The quick release skewer is attached on the tire)
5. Tighten
6. Close
4. Insert
8
U S E R M A N U A L
Rear Wheel (required tools: 18mm wrench, recommended torque 40 N.m)
Ensure the rear wheel is tightened at the recommended torque value.
Tire pressure
Inate the tires to (35 PSI). Recommended tire pressure is indicated on the tire sidewall.
Do not over-Inate or under-Inate tires.
Fender (Required tools: 5mm hex key, 15mm wrench)
1. Insert the fender hook into the fork arch.
2. Insert the bolt into the fender hook and tighten on the fork arch.
3. Use the bolts mounted on the fork to tighten the fender stays.
Bole Holder
Use the screws provided to Assemble the bottle holder.
Hydraulic Brake Lever Adjustment (required tools: 2mm hex key)
1. Tighten the indicated bolt to extend the brake lever reach.
2. Loosen the indicated bolt to shorten the brake lever reach."
ASSEMBLY
9
U S E R M A N U A L
Pedals (Required tools: 15mm wrench, recommended torque 35-40 N.m.)
The right and left pedals are marked with an "R" or "L" on the end of the thread. The right pedal axle has a smooth
surface whereas the left pedal axle has grooves.
The pedal and crank threads must line up easily. Ensure that you tighten the pedals with your hand rst. It should be easy
for the rst few turns. Do not force if tightening is hard. Stop immediately as the pedal thread is not aligned and continuing
to do so will damage the thread of the crank.
1. Apply a small amount of grease onto the pedal thread axle.
2. Insert the right pedal into the right crank. Carefully thread the pedal clockwise onto the crank by hand
slowly and then tighten.
3. Insert the left pedal into the left crank. Carefully thread the pedal counter-clockwise onto the crank by
hand slowly and then tighten.
Warning: Inserting the pedal into the wrong angle or not tightening it rmly will tear and strip the crank thread and will
cause the pedal to detach.
RemovingThe Baery
The battery keys come attached to the handlebar. Insert the key into the key port, turn clockwise, and pull the battery or battery lever.
Warning: Failure to carry out proper assembly, operation, and maintenance can result in serious injury.
ASSEMBLY
9
U S E R M A N U A L
BATTERY CHARGING
Baery Charging
Ensure the battery is fully charged before your rst ride. The charger will show a red light indicating that the battery is charging.
Once fully charged the light will turn green.
Remove the charger from the battery within one hour after it has been completely charged. The charger will automatically stop
charging when the battery is full, however, unnecessary damage to the charging components could occur if the charger is left
attached to the battery and power source.
The battery can be charged after each use. Charging the battery after short rides will not cause damage.
Warning • Charge the battery on a non-inammable surface with a smoke/re detector in place.
Do not charge the battery in a wet and humid place or anywhere exposed to strong sunlight.
• Always charge your battery where temperatures are between 10 - 25C.
• Charge the battery with the supplied charger.
Do not attempt to use another charger as it may damage the battery or cause a re or an explosion.
• Do not leave the battery unattended while charging.
Failure to follow proper charging procedures can result in damage to your battery, charger, and other
personal property.
Baery Storage
•Keep the battery indoors during extreme weather.
•Avoid storing the battery in places of high temperature or high humidity.
•Charge the battery to 70% if not used for two months. The battery will slowly discharge overtime. When the battery
reaches 20% charge it again to 70%.
Questo manuale è adatto per i seguenti modelli
2
Indice
