ØDO allow machine to reach operating speed before starting a hole.
ØDO unplug machine while changing or adjusting cutting bits so as not to accidentally turn
machine on.
ØDO remove adjusting keys or hex wrenches prior to turning the machine on.
ØDO use cutting paste (instead of cutting oil) when using this drill in an inverted position to
prevent oils from entering the electrical system and for ease of cutting.
ØDO tie a loop in any extension cord connections to prevent cords coming apart and a loss of
power.
ØDO guard against electric shock by preventing body contact with grounded surfaces such as
pipes, radiators, ranges, refrigerators, etc.
ØDO be mindful that power tools can expose an operator to vibrations transmitted trough
contact with the machine. Prolonged exposure can lead to medical issues which should be
discussed with a medical professional.
ØDO tie in a drip loop in the power cord to prevent cutting fluid from running into the power
receptacle.
ØDO use a dust extraction system for cutting materials that create dust such as cast iron. The
operator should also wear a protective respiratory device.
ØDO NOT make adjustments to machine while the machine is running.
ØDO NOT switch off the machine when it is under load, except in an emergency.
ØDO NOT remove or modify grounding plug. Only to be used on a properly grounded circuit.
ØDO NOT leave the machine running when not in use.
ØDO NOT hold the work piece by hand or using body. Always mechanically clamp or secure
work piece.
ØDO NOT allow coolant oil to enter the machine’s ventilation system.
ØDO NOT operate machine outside of machine specifications.
ØDO NOT touch moving parts while the machine is running as death or dismemberment could
occur.
ØDO NOT remove machine metals panels while machine is connected to a power source. Only
to be removed for service by qualified personal and put back on the machine after service is
complete.
ØDO NOT allow children or untrained personal to operate machine.
ØDO NOT use this machine in the rain or a wet environment. If using outdoors, make sure the
adhering surface is clean and dry.
ØDO NOT operate in the presence of explosive materials as power tools create sparks which
may ignite dust or fumes.
ØDO NOT drill into an area that may contain a live electrical wire/circuit.
