Blueshape CBS8XW Manuale utente
INTELLIGENT BATTERY CHARGER
FOR B-MOUNT LITHIUM-ION BATTERIES ONLY
CBS8XW - WALL MOUNT
OPERATING MANUAL
Revision 3.0
www.blueshape.net Printed in Malta 2024
Model:
1
Read all instructions and cautionary markings
in this manual and on the charger before
using this product. Adhere to these
instructions to prevent misuse of the products
and possible injury or damage to property.
Keep these instructions. This manual contains
important safety and operating instructions for
the charger.
Explanation of symbols used in this manual
DANGER
ELECTRIC SHOCK
This symbol indicates the presence of an
electrical shock hazard. It is intended to avert
users not to open the product as there are no
user serviceable parts inside. Any form of
servicing should be done by qualified service
personnel only.
This symbol is intended to alert the user to
important operating, servicing and
maintenance instructions within this product
manual.
This symbol is intended to alert the user to
the presence of uninsulated and potentially
dangerous voltage within the product's
enclosure that may be of sufficient strength
to constitute a risk of electric shock to
persons.
The contents in this operating manual are subject to change without
notice.
2
General Safety Instructions
This equipment must be earthed.
DANGER
ELECTRIC SHOCK
Do not remove cover or dismantle the
apparatus. There are no user-serviceable
parts inside. Always refer servicing to
qualified personnel.
BLUESHAPE CHARGERS ARE INTENDED FOR OPERATION
WITH LINE VOLTAGES BETWEEN 100V AND 264V AC AND LINE
FREQUENCIES BETWEEN 43Hz AND 60 Hz
To prevent fire or shock hazard do not
expose the unit to rain or moisture.
The user is being alerted of the importance of
going through the literature accompanying
this product and familiarising himself with the
important safety and operating instructions.
The equipment is being supplied with a
compatible AC mains power cord. In the case
when the UK Plug is fitted, this plug is
equipped with a 13A replaceable fuse.
Damage to the power cord can lead to electric
shock.
3
When using electric appliances, basic
precautions should always be followed
including the following:
Only use attachments recommended or sold by manufacturer.
To reduce the risk of injury, close supervision is necessary when
an appliance is used near children.
Do not use the charger outdoors or expose it to wet or damp
conditions. Water entering the charger will increase the risk of
electric shock.
Do not misuse the cord or charger. Never use the cord to carry
the charger. Do not pull the charger cord to disconnect the plug
from a receptacle. Damage to the cord or charger could occur
and create an electric shock hazard. Replace damaged cords
immediately.
Do not operate the charger with a damaged cord or plug, which
could cause shorting and electric shock.
This appliance is not intended for use by persons (including
children) with reduced physical, sensory or mental capabilities, or
lack of experience and knowledge, unless they have been given
supervision or instruction concerning use of the appliance by a
person responsible for their safety.
For a portable appliance, to reduce the risk of electrical shock,
do not submerge charger in water or other liquid. Do not place or
store appliance where it can fall or be pulled into a tub or sink.
Usage and Handling Safety Instructions
Charge only lithium-ion rechargeable
batteries as specifically designated on your
charger’s label. Other types of batteries may
burst, causing personal injury or damage.
BLUESHAPE lithium-ion battery chargers have been designed to
provide a superior performance by managing relatively high currents
during their operation in order to reduce charging time. As may be
expected, the chargers become warm during operation.
4
The charger is also equipped with over-
temperature protection. Please consult your
BLUESHAPE dealer if you notice that either a
charger or a battery has become excessively
hot during the charging operation.
Keep ventilation openings unobstructed to
allow adequate airflow through the device.
Never insert any metallic or any objects inside
the equipment through the ventilation
openings or otherwise.
Do not handle charger, including the charger plug and charger
terminals with wet or damp hands.
Use of an attachment not recommended or sold by the battery-
charger manufacturer may result in a risk of fire, electric shock,
or injury to persons.
Make sure that the cord is located so that it will not be stepped
on, tripped over, come in contact with sharp edges or moving
parts, or otherwise be subjected to damage or stress. This will
reduce the risk of accidental falls, which could cause injury and
damage to the cord, which could then result in electric shock.
Do not operate the charger if it has received a sharp blow, been
dropped, or has otherwise been damaged in any way. Take it to
an authorized service technician for an electrical check to
determine if the charger is in good working order.
Do not disassemble the charger. Take it to an authorized service
technician when service or repair is required. Incorrect
reassembly may result in a risk of electric shock or fire.
Unplug the charger from the electrical outlet before attempting
any maintenance or cleaning to reduce the risk of electric shock.
Disconnect charger from the power supply when not in use. This
will reduce the risk of electric shock or damage to the charger if
metal items should fall into the opening. It will also help prevent
damage to the charger during a power surge.
Do not touch the uninsulated portion of output connector or
uninsulated battery terminal.
5
CBS8XW Package Contents
This device package contains the following:
- CBS8XW wall-mount charger
- Wall Hanging Bracket
- AC Power Cord [according to region]
Device-End Connector: IEC 60320 C13
EU Plug: IEC 884/CEE7-VII3
UK Plug: BS1363A w/13A FUSE
US Plug: NEMA 5-15-P
- CORDAGE: H05VV-F, 3 x 1.0mm, UNSHIELDED
CEE COLOR CODE, TEMP. RATING 60°C
RATING: 250V 10A
JACKET COLOR: BLACK
- Operating Manual
Recharge battery packs only with the charger specified by the
manufacturer. A charger that is suitable for one type of battery
pack may create a risk of fire when used with another battery
pack.
Keep the cord and charger away from heat to prevent damage to
housing or internal parts.
Do not allow gasoline, oils, petroleum-based products, etc. to
come in contact with plastic parts. These materials contain
chemicals that can damage, weaken, or destroy plastic.
6
Overview
This charger comes in three different model variants:
CVS8XW: For v-lock lithium-ion batteries only
CGS8XW: For 3-stud lithium-ion batteries only
CBS8XW: For b-mount lithium-ion batteries only
To clarify your model, check the front panel markings as illustrated
below.
CVS8XW
Charger Variants
7
Graphic Description
CBS8XW - Front View
The Charger front facing panel consists of the following:
1. B-Mount Battery charging bays
2. 3.5” Touch Display
3. Mains switch
4. Aux output connector (28.8V 115W) 3-pin XLR
8
CVS8XW - Side View
The Charger frame consists of the following:
1. Ventilation Outlets
2. Carrying Handle
3. Data connector
4. AC mains input, 100-264V
5. Ventilation Inlets
6. Wall Hanging Bracket (refer to page 9)
7. Supporting lateral studs
Indice
Altri manuali Blueshape Caricabatterie per batterie
Blueshape
Blueshape CVS8XW Manuale utente
Blueshape
Blueshape CVS4X Manuale utente
Blueshape
Blueshape PWS4 Manuale utente
Blueshape
Blueshape CVS8X Manuale utente
Blueshape
Blueshape CGTR2P Manuale utente
Blueshape
Blueshape CVTR2 Manuale utente
Blueshape
Blueshape CVTR2P Manuale utente
Blueshape
Blueshape CVTR2 Manuale utente
Blueshape
Blueshape CVTR2PV Manuale utente
Blueshape
Blueshape CVS8XW Manuale utente
