Bluestream CMX44CS Manuale utente
CMX44CS
User Manual
RevA0_CMX44CS_User_Manual_220125
4x4 4K HDMI 2.0 Matrix
OUTPUT INPUT
OUTPUT INPUT
EDID
HDMI 1 HDMI 2 HDMI 3 HDMI 4 HDMI 1 HDMI 2 HDMI 3 HDMI 4
INPUT
IR OUT IR OUT IR OUT IR OUT
0123
L/R L/R L/R L/R IR IN IR IN IR IN IR INCOAX
OUTPUT
L/R COAX L/R COAX L/R COAX L/R
0
1
12V 2A
TCP/IP RS-232
IR CTRL
CMX44CS
CMX44CS USER MANUAL
www.blustream.com.au |www.blustream-us.com |www.blustream.co.uk02
Surge Protection Device
Recommended
This product contains sensitive
electrical components that may be
damaged by electrical spikes, surges,
electric shock, lightning strikes, etc.
Use of surge protection systems is
highly recommended in order to
protect and extend the life of your
equipment.
Contents
Thank you for purchasing
this product.
For optimum performance and safety,
please read these instructions care-
fully before connecting, operating or
adjusting this product. Please keep this
manual for future reference.
Introduction 03
Features 03
Front Panel Description 04
Rear Panel Description 04
EDID Management 05
Infrared (IR) Control 06
Web GUI Control 06-10
Remote Control Description 11
IR Commands 11-12
Specifications 13
Package Contents 13
Maintenance 13
RS-232 Config & Telnet Commands 14-15
Schematic 16
Certifications 17
CMX44CS USER MANUAL
Contact: support@blustream.com.au |support@blustream-us.com |support@blustream.co.uk 03
Our Contractor CMX44CS 4K HDMI Matrix oers unprecedented performance and
value for the custom installation market. The CMX44CS supports HDMI2.0 with
HDCP2.2, allowing distribution of four HDMI sources to four displays. This enables
all sources to be viewed as required within a matrix configuration. The unit
transmits all HDMI resolutions up to and including 4K 60Hz 4:4:4 with automatic
video down conversion. The 4-way matrix also includes audio breakout and
advanced EDID management.
Introduction
FEATURES:
• Features 4x HDMI inputs which can be independently routed to 4x HDMI outputs
• Supports HDMI2.0 18Gbps specification including HDR
• Supports up to 4K UHD 60Hz 4:4:4
• Video down-conversion on outputs allowing a display only capable of supporting lower video resolutions (4K 60Hz
4:2:0 or 1080p) to receive 4K 60Hz 4:4:4 video content while still showing maximum original 4K UHD resolution on
remaining video outputs
• Supports all industry standard video resolutions including VGA-WUXGA and 480i-4K
• Supports all known HDMI audio formats including Dolby Atmos, Dolby TrueHD, Dolby Digital Plus and DTS-HD
Master Audio transmission
• HDMI audio breakout to associated output analogue L/R audio and coaxial digital outputs concurrently
• Control via front panel, IR, RS-232, TCP/IP and Web GUI
• IR routing
• Supplied with Blustream 5V IR receivers and emitters
• 3rd party drivers available for major control brands
• Advanced EDID management
• HDCP2.2 compliant
• 1U Design for 19” rack mount integration- mounting kit included
CMX44CS USER MANUAL
www.blustream.com.au |www.blustream-us.com |www.blustream.co.uk04
Front Panel Description
1IR Receiver - Built in IR sensor for IR control
2Status LED - Illimunates blue when matrix is in standby mode and flashes when IR command is received
3Output LCD - Shows the currently selected output
4Output Up / Down Button - Press to adjust the selected output up or down
Press and hold Output Up button for PTP mode (In 1 to Out 1, In 2 to Out 2, In 3 to Out 4, In 4 to Out 4)
5Input Up / Down Button - Press to adjust the selected input up or down
Press and hold Input Up button for 3 seconds to power the matrix o
6Input LCD - Shows the currently selected input
1Ground Screw - Chassis ground connection
2EDID DIP switch – Used for global EDID settings
3IR Emitter Output - 3.5mm mono connector to connect to Blustream IR emitter. Used for local source control
4Analogue L/R Audio Input - 3.5mm stereo connector allows audio to be embedded over HDMI input signal
5IR Receiver Input - 3.5mm stereo connector to connect to Blustream IR receiver or 3rd party control processor
6Coaxial Digital Audio Output - RCA (S/PDIF)
7Analogue L/R Audio Output - 3.5mm stereo connector with fixed line level output. Supports 2 channel PCM audio
formats only
8TCP/IP - RJ45 connector for TCP/IP and web-GUI control of the matrix
9RS-232 - DB9 connector for RS-232 control of the matrix
qHDMI Inputs - Connect to source devices
wHDMI Outputs - Connect to display devices
eIR Control Input - 3.5mm stereo connector to connect to Blustream IR receiver for IR control of the matrix
rPower Port - Use included 12V/2A DC power adaptor
Rear Panel Description
4x4 4K HDMI 2.0 Matrix
OUTPUT INPUT
OUTPUT INPUT
EDID HDMI 1 HDMI 2 HDMI 3 HDMI 4 HDMI 1 HDMI 2 HDMI 3 HDMI 4
INPUT
IR OUT IR OUT IR OUT IR OUT
0123
L/R L/R L/R L/R IR IN IR IN IR IN IR INCOAX
OUTPUT
L/R COAX L/R COAX L/R COAX L/R
0
1
12V 2A
TCP/IP RS-232
IR CTRL
CMX44CS
1 4 5 63
4x4 4K HDMI 2.0 Matrix
OUTPUT INPUT
OUTPUT INPUT
EDID
HDMI 1 HDMI 2 HDMI 3 HDMI 4 HDMI 1 HDMI 2 HDMI 3 HDMI 4
INPUT
IR OUT IR OUT IR OUT IR OUT
0123
L/R L/R L/R L/R IR IN IR IN IR IN IR INCOAX
OUTPUT
L/R COAX L/R COAX L/R COAX L/R
0
1
12V 2A
TCP/IP RS-232
IR CTRL
CMX44CS
10 12 13
1 2 3 4 8
2
9
11
5 6 7
CMX44CS USER MANUAL
Contact: support@blustream.com.au |support@blustream-us.com |support@blustream.co.uk 05
EDID (Extended Display Identification Data) is a data structure that is used between a display and a source. This data
is used by the source to find out what audio and video resolutions are supported by the display. By pre-determining
the video resolution and audio format of the source and display device you can reduce the time needed for EDID hand
shaking thus making switching quicker and more reliable.
Configuration of Matrix EDID settings can be acheived in one of four ways:
1Using Matrix web browser interface (see section on Web GUI Control)
2 Using API commands via RS-232 or Telnet (see below)
3 Using Matrix EDID dipswitches (see below)
To configure the EDID via RS-232/Telnet API:
Configuration of the EDID settings for each input can be
achieved using the following API commands to specify the
required EDID. Please see the section on RS-232 and Telnet
API at the end of this manual for connectivity information:
EDID xx DF zz Set Input xx EDID To Default EDID zz
xx = Input On Product (00 Refers To ALL Inputs, 02 = Input 2 Etc)
zz=00: HDMI 1080p@60Hz, Audio 2ch PCM
zz=01: HDMI 1080p@60Hz, Audio 5.1ch DTS/DOLBY
zz=02: HDMI 1080p@60Hz, Audio 7.1ch DTS/DOLBY/HD
zz=03: HDMI 1080i@60Hz, Audio 2ch PCM
zz=04: HDMI 1080i@60Hz, Audio 5.1ch DTS/DOLBY
zz=05: HDMI 1080i@60Hz, Audio 7.1ch DTS/DOLBY/HD
zz=06: HDMI 1080p@60Hz/3D, Audio 2ch PCM
zz=07: HDMI 1080p@60Hz/3D, Audio 5.1ch DTS/DOLBY
zz=08: HDMI 1080p@60Hz/3D, Audio 7.1ch DTS/DOLBY/HD
zz=09: HDMI 4K@30Hz 4:4:4, Audio 2ch PCM
zz=10: HDMI 4K@30Hz 4:4:4, Audio 5.1ch DTS/DOLBY
zz=11: HDMI 4K@30Hz 4:4:4, Audio 7.1ch DTS/DOLBY/HD
zz=12: DVI 1280x1024@60Hz, Audio None
zz=13: DVI 1920x1080@60Hz, Audio None
zz=14: DVI 1920x1200@60Hz, Audio None
zz=15: User EDID 1
zz=16: User EDID 2
zz=17: GUI Download EDID
zz=18: HDMI 4K@60Hz 4:2:0, Audio 2ch PCM
zz=19: HDMI 4K@60Hz 4:2:0, Audio 5.1ch DTS/DOLBY
zz=20: HDMI 4K@60Hz 4:2:0, Audio 7.1ch DTS/DOLBY/HD
zz=21: HDMI 4K@60Hz 4:4:4, Audio 2ch PCM
zz=22: HDMI 4K@60Hz 4:4:4, Audio 5.1ch DTS/DOLBY
zz=23: HDMI 4K@60Hz 4:4:4, Audio 7.1ch DTS/DOLBY/HD
EDID Control
3 2 1 0 EDID Type
Combination of DIP positions
0 0 0 0 1080p 60Hz 2.0ch
0 0 0 1 1080p 60Hz 5.1ch
0 0 1 0 1080p 60Hz 7.1ch
0 0 1 1 1080i 60Hz 2.0ch
0 1 0 0 1080i 60Hz 5.1ch
0 1 0 1 1080i 60Hz 7.1ch
0 1 1 0 4K 60Hz 4:2:0 2.0ch
0 1 1 1 4K 60Hz 4:2:0 5.1ch
1 0 0 0 4K 60Hz 4:2:0 7.1ch
1 0 0 1 4K 60Hz 4:4:4 2.0ch
1 0 1 0 4K 60Hz 4:4:4 5.1ch
1 0 1 1 4K 60Hz 4:4:4 7.1ch
1 1 0 0 DVI 1280x1024@60Hz
1 1 0 1 DVI 1920x1080@60Hz
1 1 1 0 DVI 1920x1200@60Hz
1 1 1 1 Soware EDID
To configure the EDID via DIP Switch:
To configure the global EDID for all inputs via the
DIP switch, use the settings below. Note this will
override and disallow any EDID settings configured
via the web GUI.
EDID
0123
0
1
CMX44CS USER MANUAL
www.blustream.com.au |www.blustream-us.com |www.blustream.co.uk06
This following pages take you through the operation of this Matrix’s Web-GUI. You must connect the TCP/IP RJ45 socket
to your local network in order to access the products Web-GUI.
By default the matrix is set to DHCP, however if a DHCP server (eg: network router) is not installed the matrix IP address
will revert to below details:
Default IP Address is: 192.168.0.200 Default Username is: blustream Default Password is: 1234
The device can also be accessed via its mDNS name which is defaulted to: http://cmx44cs.local/
The Web-GUI supports multiple users along with multiple user permissions as follows:
Guest Account - This account does not require a user to login. The Guest account can only change sources for each
zone. Guest access can be changed by the Admin, limiting inputs or outputs as necessary.
User Accounts - User accounts can be utilised, each with individual login details. User accounts can be assigned
permissions to specific areas and functions. A User must log in to make use of these functions.
Admin Account - This account allows full access to all functions of the Matrix as well as assigning users with
permissions.
Web-GUI Control
The Blustream range of matrix products include Matrix control via IR.
IMPORTANT: Blustream Infrared products are all 5V and NOT compatible with alternative manufacturers
Infrared solutions. When using third party 12V IR control solutions please use the Blustream IRCAB cable for IR
conversion.
IR Receiver - IRR
Blustream 5V IR receiver to receive
an IR signal for control of the matrix.
IR Control Cable - IRCAB
Blustream IR Control cable 3.5mm Mono to
3.5mm Stereo for linking third party control
solutions to Blustream products.
Compatible with 12V IR 3rd party products.
Please Note: cable is directional as
indicated.
IR Receiver - Stereo 3.5mm
Infrared (IR) Control
Signal
5V
Ground
CMX44CS USER MANUAL
Contact: support@blustream.com.au |support@blustream-us.com |support@blustream.co.uk 07
Login Page
The Login Page allows a user or admin to login and access additional functionality within the Web GUI.
Once you select a user from the list you will be asked to enter the pasword for that user in order to sign in.
Please note the first time you log in to the web GUI you will be asked to change the default admin password. It is
important to record this password as there is no way to recover it in the event that it is forgotten.
CMX44CS USER MANUAL
www.blustream.com.au |www.blustream-us.com |www.blustream.co.uk08
Guest Control Page
The Guest Control Page allows a guest to change inputs for each zone without needing to be logged into the matrix.
Simply select the square that corresponds with the input and zone you wish to change.
There is also a power button on the top right corner to turn the Matrix on or o.
User Control Page
The logged in User or Admin Control Page allows a user to change inputs and presets for each zone. To change inputs,
simply select the square that corresponds with the input and zone output you wish to change. On the right side you
can recall a preset, or save the current input/output configuration into a specified preset. There is also the ability to
turn on or o the video (and audio) to each output via the Video Mute buttons.
The user can also update their password via the Update Password button, or log out via the Log Out button.
CMX44CS USER MANUAL
Contact: support@blustream.com.au |support@blustream-us.com |support@blustream.co.uk 09
Input Page
The Input Page allows users to change settings specific to the inputs of the matrix.
You can adjust the name of each input, the EDID of each input as select the audio source for each input, as well as see
the status of HDMI cables and sources connected to each input.
Output Page
The Output Page allows users to change settings specific to the outputs of the matrix.
You can adjust the name of each output, adjust the output scaling between matching the TV based on its EDID, forcing
a 1080p output image, or allowing the original signal to bypass without being scaled, as well as see the status of HDMI
cables and displays connected to each output.
CMX44CS USER MANUAL
www.blustream.com.au |www.blustream-us.com |www.blustream.co.uk10
Users Page
The Users Page allows the admin to add or remove users, or set specific permissions for inputs, outputs and presets
for each user.
Settings Page
The Settings Page allows you to the change the settings associated with the network interface and device
communication, such as:
• DHCP On/O
• IP Address
• Gateway
• Subnet Mask
• Domain Name (mDNS name)
• RS-232 Baudrate
• Telnet Port
• IR Control On/O
• Front Panel Buttons On/O
• LCD Always On/Auto Timeout
Indice
Altri manuali Bluestream Commutatore a matrice
Bluestream
Bluestream C44CS-KIT Manuale utente
Bluestream
Bluestream HMXL88ARC Manuale utente
Bluestream
Bluestream CMX88AB Manuale utente
Bluestream
Bluestream HMX44-18G-KIT Manuale utente
Bluestream
Bluestream HMXL66ARC Manuale utente
Bluestream
Bluestream HMXL44AB Manuale utente
Bluestream
Bluestream C66 Manuale utente
Bluestream
Bluestream PLATINUM PLA88ARC Manuale utente
Bluestream
Bluestream HMX88-18G Manuale utente
Bluestream
Bluestream PLA88L V2 Manuale utente
