Blueview ANS2-10 Manuale utente
ANS2-10
LED SILICONE NEON FLEX
Other Parameters
Model No.
Model No. LED Quantity
(pcs)
Series
Connection
(m)
Mini Cuttable
Length
(m)
Max Run
(m)
Color Temperature
Wavelength
(K/nm)
Luminous
Flux[Typical]
(lm/m)
Efcacy
(lm/m)
Voltage
(V)
ANS2-10
ANS2-10 120 50 50 0.0625
4119K
588.8nm
523.4nm
463.9nm
617.2nm
132
132
132
132
132
≥80
/
/
/
/
33 8.8
8.8
8.8
8.8
8.8
34.1
220
220
220
220
220
37.7
7.53
17.6
290.4
300.0
331.7
66.3
155.2
Beam Angle Ra Power
(W/m)
-25~+60℃-25~+70℃
Working
Temperature
Storage
Temperature
NOTE:
Test environment temperature : 25±2°C.
The above data is typical values. The actual data of each single product may differ from the typical values. The
data is subject to change without notice.
Different color temperature will make luminous ux different.
1
2
3
Installation
Optical & Electrical Parameters
By clips
ANS2-10
LED SILICONE NEON FLEX
Length vs. power vs. voltage drop
Working Length
(m)
1 0.044 220 217.3 217.3 0
0
0.2
0.6
0.7
1.7
2.5
3.7
4.8
5.7
6.1
217.1
216.9
216.5
216.1
215.1
214.3
213.1
212.0
211.3
210.7
217.1
217.1
217.1
216.8
216.8
216.8
216.8
216.8
216.8
216.8
9.68 -
-
-
-
-
-
-
-
-
-
-
49.28
98.18
147.18
196.24
245.08
294.14
343.2
391.6
440
484
220
220
220
220
220
220
220
220
220
220
0.224
0.446
0.669
0.892
1.114
1.337
1.56
1.78
2.0
2.0
5
10
15
20
25
30
35
40
45
50
Rated Current
(A)
Rated Voltage
(AC V)
Rated Power
(W)
Power Supply
Method(DC V)
Voltage at the
beginning(DC V)
oltage at the
end (DC V)
Voltage Drop
(DC V)
Prole Drawing
Unit:mm
Please ask the sales for detail drawing.
NOTE:
ANS2-10
LED SILICONE NEON FLEX
AVERAGE BEAM ANGLE(50%)：115.7° C0/180,117.6°
C90/270,113.8°
Unit：cd
Luminous Intensity Distribution Diagram
ANS2-10
LED SILICONE NEON FLEX
Average Illumination
The test sample is 1m with color temperature of 4119K. Please
ask the sales for data of other color temperature or colors.
Note:
Luminous Flux output：208.9ml
1cm 280402,981720 lx 3.01cm
6.02cm
9.02cm
12.03cm
15.04cm
18.05cm
21.06cm
24.07cm
27.07cm
30.08cm
70701,245430 lx
31156,109080 lx
17525,61358lx
11216,39269 lx
7789,27270 lx
5722,20035 lx
4381,15339 lx
3462,12120 lx
2804,9817 lx
Height Eavg，Emax Beam Angle：115.18° Diameter
2cm
3cm
4cm
5cm
6cm
7cm
8cm
9cm
10cm
ANS2-10
LED SILICONE NEON FLEX
End exit (FREE)
Quantity(50m):3pcs
3.5cm Aluminum track
(Optional)
Quantity(50m):100pcs
Silicone glue (Optional)
Quantity(50m):1pcs
End cap (FREE)
Quantity(50m):3pcs
Screw (FREE)
Quantity(50m):100pcs
Plastic clip (FREE)
Quantity(50m):100pcs
Grip Plate (Optional)
Quantity(50m):100pcs
Accessories
Packaging
Roll the product on the
reel and tie it with PE lm
Put the reel and
accessory bag together
into carton box
Accessories
bag
Label the reel
Seal and label the box
Match each reel with
accessory bag
Use packing belt to pack.
Add edge protectors if
necessary.
1
4
2
5
3
6
Model No.
ANS2-10 50000*15*10 375*375*200 1 6.50(1±10%) 9.50(1±10%)
Product Size（mm) Carton Size（mm) Total Quantity Net Weight(kg) Gross Weight(kg)
Packaging information
The above quantity and weight are only for the illustrated packaging method. There will be differences
in the quantity and weight with other packaging methods.
Note:
ANS2-10
LED SILICONE NEON FLEX
Installation
1.Tools
2.Accessories
Cutter Electric batch Brush
End exit (FREE)
Quantity(50m):3pcs
3.5cm Aluminum track
(Optional)
Quantity(50m):100pcs
Silicone glue (Optional)
Quantity(50m):1pcs
End cap (FREE)
Quantity(50m):3pcs
Screw (FREE)
Quantity(50m):100pcs
Plastic clip (FREE)
Quantity(50m):100pcs
Grip Plate (Optional)
Quantity(50m):100pcs
Accessories can be provided according to customer's requirements
Note:
ANS2-10
LED SILICONE NEON FLEX
3.Installation steps
4.Installation by clip
Installation of the end cap
Installation of end exit
Solder the wire to the PCB board
First put some glue inside of the plug,
then push into the tape light
Screw the clip into the installation
position
Then slowly press the tape light into the
clip
The tape light is atly and rmly stuck in
the clip
Wipe off the excess glue and wait for the
glue to solidify.
First put waterproof glue inside of the end
exit, then push into the tape light
Wipe off the excess glue and wait for the
glue to solidify
1
1
1 2 3
2
2
3
When soldering, pay attention to the positive and negative poles of wire and PCB
board; positive to positive and negative to negative
1.
Each connection point must use 10g silicone glue, and treat waterproof and
insulation well;
2.
Screw should perpendicular to installation surface and be fastened, as shown in
the right.
3.
Note:
ANS2-10
LED SILICONE NEON FLEX
5.Attentions
Do not do live-line working for high voltage product.
1.
Follow the instructions of wiring diagram (first connect the load and then the
power supply) to avoid short circuit.
2.
Make sure the correct connection of positive and negative poles between led
module and power supply. Otherwise, the light will not be on.
3.
Make sure the power cord rmly screwed into the terminal as it can not be pulled
out by hands.
4.
The terminal should have insulation, waterproof and anti-corrosive treatment.5.
Cuttable mark Neat and smooth cut Slide a spindle into the
roll and then place the roll
with spindle on top of the
box provided.
Gently unroll the xture
without excessive force.
Do not repeatedly
bending This will damage
the circuit
Do not wring Do not bend 90° No embossing operation
No cutting distort No embossing
operation
Do not twist
Warning
Cutting marks are on the PCB and can be observed outside.
1.
The above diagram only shows the correct or wrong way of operation, only as the
reference.
2.
Note:
ANS2-10
LED SILICONE NEON FLEX
Common Faults and Troubleshoot
Quick Guide Warning
Problems
All LEDs can
not light on.
LEDs can not
light on partly.
Brightness of
LED
is inconsistent
tor insufcient.
LED icker.
Automatic power protection
from the open or short
circuit in output of the power
supply. Fix the short circuit problem.
Correctly connection
Check the power supply
system to x it.
Replace with more powerful
power
Make sure led module working
voltage within ±5% of standard
voltage, or keep balance by
circuit power consumption.
Repair should be operated by a qualied technician, if the external circuit or main line of this product is damaged.
The parameters given in this manual are typical values and for reference only.
All illustrations and drawings in this manual are for reference.
This product is subject to change without notice.
LED lighting products belongs to electronic products, please do recycling treatment according to the relevant WEEE directives.
Reduce the quantities of LED
modules in series connection
to meet requirement.
Fix the short circuit problem.
Wrong connection of power
supply.
Some switching mode power
supplies are not powered.
Power supply line error.
Mistaken wire connection of
some of products
Power overloaded.
Connection point fault. Remove bad connection point.
Replace a new power supply.
Please follow the instructions
Power supply circuit
excessive consumption.
Excessive quantities in series
connection of LED modules.
Switching power supply
failure.
Wrong Installation or use of
products
Reasons
No electric supply.
Solutions Do not disassemble or retrot the light. Do not touch the surface of the
light with a sharp object.
Do not do live-line working during installation,especially for high voltage
product.
Do not use any organic chemical solvents.
Use neutral glass adhesive to x this product and it needs to be dried 4
hours in the open environment after operation.
Treat the ends and the circuit connection points that are not connected
to the main line with insulation,waterproof, and anti-corrosion in the
installation.
Use 18AWG (0.75mm2 or thicker core wire to avoid adverse
consequences caused by overheating, if the power cable need to
lengthen.
Make sure the input voltage meets the requirements and lines are
connected correctly before lighting on.This product is as backlight of
signage, and do not use as general lighting.Series connection within the
max run.
The length of the power cable between the power supply and the led
strip should not exceed 2 meters.Otherwise, large circuit loss will lead
to inconsistent brightness
Installation, maintenance and repair should be operated by a qualied
technician.
Statements and Recycling
Statements:
Recycling:
Indice
Altri manuali Blueview Apparecchio di illuminazione
Manuali Apparecchio di illuminazione popolari di altre marche
Emos
Emos CLASSIC ZY1431T Manuale utente
Westinghouse
Westinghouse Outdoor Lighting Fixture Manuale utente
Hedler
Hedler C 12 silent Manuale utente
Blizzard Lighting
Blizzard Lighting Puck: CSI Manuale utente
Energetic Lighting
Energetic Lighting ELYSL-5004 Series Manuale utente
Lightmaxx
Lightmaxx Shaft 5R Manuale utente
Cooper Lighting
Cooper Lighting Halo L3232E Manuale utente
Stageline
Stageline ODW-2410RGBW Manuale utente
Light Sky
Light Sky Tornado Series Manuale utente
Lightolier
Lightolier Paralyte 2424 PLA2G9LS26U Manuale utente
Lightolier
Lightolier Lytespan 83ED17S Manuale utente
Lightolier
Lightolier Calculite CS8226 Manuale utente