BluEye PRO Manuale utente

USER MANUAL

REV C

In the package

Blueye Pro underwater drone

Transport Case Reel w/tether

Power magnet

Blueye Surface unit (installed in reel)

Controller

Blueye Charger

Power supply

Charging cable for drone

USB charger

Charging cable for surface unit / controller

Universal mount

Battery (installed in drone)

Hex keys and torx keys

Silicone grease

Spare o-rings

Pin spanner

Spare propellers

Drone

The drone is safe to submerge in water to a depth of 305 m / 1000 ft.

Handle

Vertical thruster

Slot for universal mount

Charging port

Camera

Lateral thruster

LED lights and power on/off sensor

Forward thruster

Battery lid

Battery lid screw

Tether shackle

Salt water ballast weight (remove

when diving in fresh water)

Universal mount

Surface Unit

Antenna

The Blueye Surface Unit(S.U.) is installed

inside the tether reel. All S.U. buttons and

cable ports are accessible through openings

in the front cover on the reel. If you need

to separate the S.U. from the reel, use the

included tools to unscrew the reel cover.

Rubber connector lid

Connection status indicator

Battery check button

Battery level indicator

Tether connector

Securing strap

Reset button

USB accessory port

Charging port (Micro USB)

Power button

The surface unit can withstand water spray from

any direction (IP64) when the rubber connector lid

is properly attached. The surface unit CANNOT be

submerged in water.

The operator shall maintain a minimum distance of

20 cm to the surface unit.

> 1,5 m/s

150 m

> 1,5 m/s

150 m

The surface unit is turned on.

The surface unit is turned on and

connected to the drone.

Battery level is low. Push the button

with the battery symbol to check the

battery level.

Battery is fully charged. Push the but-

ton with the battery symbol to check

the battery level.

Charger

The charger is NOT splash proof. it needs to be

kept away from water and dust.

> 1,5 m/s

150 m

DC input

Drone charging output

Charging status

Indicates whether the battery is

selected for charging inside or

outside the drone

Select to charge via drone or battery

Battery charging connector

To charge the battery inside the drone with the charger cable, set the charger

selector switch to the drone symbol.

To charge the battery outside the drone by connecting it directly to the

charger, set the charger selector switch to the battery symbol.

The battery is charging. The battery is fully charged.

Remote controller

Some of the buttons have multiple functions: Press and hold down the

left or right Modifier (L1 or R1) (LT or RB) to enable the (*)-actions.

iOS

L1L2 R1 R2

Modifier*

Boost thruster power

Light ON/OFF

Lock heading ON/OFF

Lock depth ON/OFF

Capture video ON/OFF

*Capture still picture

Pairing button

Modifier*

Decrease thruster power

Left stick

Adjust lights

*Adjust camera exposure

Tilt function

Power button

Right stick

(Hold down Modifier to enable)

Pro

*Adjust camera exposure

(Hold down Modifier to enable)

Tilt function

Android Pro

Modifier*

Boost thruster power

Light ON/OFF

Lock heading ON/OFF

Lock depth ON/OFF

Capture video ON/OFF

*Capture still picture

Modifier*

Decrease thruster power

Left stick

Adjust lights

MODE button

Right stick

*Adjust camera exposure

Tilt function

(Hold down Modifier to enable)

LTLB RB RT

iOS

Android

Changes in the controller layout can occur.

Diagrams and information regarding changes in control

mapping will be provided in the Blueye App Settings

and the Blueye Help Center (support.blueye.no). Also

make sure you are updated with the latest app.

The remote controller is NOT splash proof. It needs

to be kept away from water and dust.

> 1,5 m/s

150 m

> 1,5 m/s

150 m

Left stick

Up/down and sideways

Right stick

Forward/backwards and turning

> 1,5 m/s

150 m

> 1,5 m/s

150 m

Down

Up Forwards

Backwards

Sideways Left Turn Left

Sideways Right Turn Right

> 1,5 m/s

150 m

> 1,5 m/s

150 m

> 1,5 m/s

150 m

> 1,5 m/s

150 m

> 1,5 m/s

150 m

> 1,5 m/s

150 m

The left and right sticks controls the movements of the drone under water.

Press and hold the left and right lower triggers (L2 and R2) (LB and RT) to

gradually decrease or boost the thrust power.

Decreasing the thrust is recommended in situations were higher precision

is needed, for example stable video shoots or tricky navigation. Boosting of

the thrust can be helpful when diving in higher currents or if faster motion

is needed. Note that boosting will drain the battery faster.

Indice

Altri manuali BluEye Drone

BluEye

BluEye Pioneer Guida

Manuali Drone popolari di altre marche

Ryze

Ryze Tello Manuale utente

PowerVision

PowerVision PowerRay Manuale utente

Force1

Force1 rogue F72 Manuale utente

Zerotech

Zerotech DOBBY Manuale utente

Protocol

Protocol VIDEODRONE AP Manuale utente

dji

dji Matrice M210 Manuale utente

MAKE

MAKE Terry Kilby Manuale utente

SYMA

SYMA X440 Manuale utente

RUKO

RUKO F11 Manuale utente

SYMA

SYMA X5UW(720P) Manuale utente

Dynali

Dynali 25 H Guida

dji

dji PHANTOM 4 Manuale utente

Atlas

Atlas AtlasPRO Manuale utente

Twodots

Twodots TVVIN BOARD Manuale utente

GDU

GDU SAGA Manuale utente

Ares

Ares ETHOS QX 130 Manuale utente

Walkera

Walkera ZHUN Manuale utente

dji

dji WIND-4 Manuale utente