BLUM AVENTOS Manuale utente
Installation instructions – Original
SERVO-DRIVE for AVENTOS
AVENTOS HF AVENTOS HS AVENTOS HL AVENTOS HK
Table of contents Using the installation instructions 3
Safety 3
Intended use 3
Warning signs and danger symbols 3
Safety information 4
Structural changes and spare parts 5
Disposal 5
Function 5
Planning information 6
Orientation diagram 8
Assembly Blum distance bumper 8
Distribution cable 8
Drive unit 9
Orientation diagram Blum transformer and accessories 10
Assembly Blum transformer and accessories 11
SERVO-DRIVE switch 11
Functions SERVO-DRIVE for AVENTOS 13
Start-up SERVO-DRIVE for AVENTOS 14
Deactivation SERVO-DRIVE for AVENTOS 16
LED signals LED displays 16
Assembly Cover cap 17
Replacement SERVO-DRIVE switch battery 17
Removal Drive unit 18
Distribution cable 18
Blum transformer and accessories 18
Troubleshooting 19
2
Using the installation instructions
⇒ Please read the installation instructions and safety information before SERVO-DRIVE for AVENTOS start-up.
⇒ We recommend that you use the orientation diagram for easier identification of the parts being described.
⇒ These installation instructions are for the AVENTOS HF, AVENTOS HS, AVENTOS HL and AVENTOS HK lift
systems.
However, only AVENTOS HF is used as an example in the illustrations.
⇒ Please see the special AVENTOS installation instructions for the assembly steps of the mechanical AVENTOS HF, HS,
HL and HK lift systems without SERVO-DRIVE.
Safety
SERVO-DRIVE for AVENTOS complies with current safety standards.
Nevertheless, there are certain risk factors if these installation instructions are
not followed. Please be aware that Julius Blum GmbH is not responsible for
incidental or consequential damages that may arise due to non-compliance
with these installation instructions.
Principle
Intended use SERVO-DRIVE for AVENTOS supports the opening and closing of lift systems
in furniture and may only be used under the following conditions:
• In dry, enclosed rooms.
• In combination with AVENTOS lift systems from Julius Blum GmbH within per-
mitted technical specifications.
• In combination with a Blum transformer.
Warning signs and
danger symbols
DANGER
Danger:
The DANGER sign indicates important safety information
that must be followed. If this information is not followed, this
could lead to serious injury or death.
WARNING
Warning:
The WARNING sign indicates important safety information
that must be followed. If this information is not followed, this
could lead to injury or property damage.
CAUTION
Caution:
The CAUTION sign indicates information that if not followed
may lead to property damage or premature wear.
NOTICE
NOTICE:
The NOTICE sign indicates information that should be
followed.
3
⇒ All national standards must be followed for SERVO-DRIVE for AVENTOS
assembly. This includes, in particular, those related to the mechanical
safety of moving parts and electrical cabling.
⇒ Only qualified technicians may install/replace Blum components, modify
the position of the Blum transformer or modify any cabling.
⇒ The device may only be connected to a power supply that corresponds to
the type and frequency listed on the serial tag (see Blum transformer).
⇒ The outlet must be freely accessible.
⇒ To ensure that lift elements cannot be activated unintentionally, we recom-
mended connecting the Blum transformer to a switched outlet.
⇒ Only 1 Blum transformer may be used per distribution cable.
⇒ Maintain safety distances to the Blum transformer unit listed in the installa-
tion instructions.
⇒ Make sure that moisture cannot penetrate the Blum transformer and drive
unit.
⇒ Before starting repair or maintenance work, unplug the Blum transformer
to disconnect the power.
⇒ The drive unit, Blum transformer and SERVO-DRIVE switch should only
be cleaned with a moist cloth because penetrating moisture and aggres-
sive cleaning materials can damage the electronics of the drive unit, Blum
transformer and SERVO-DRIVE switch.
⇒ Do not touch the area around the lever during the opening and closing
motion.
Safety information
⇒ Never take apart a drive unit or a SERVO-DRIVE switch.
⇒ Damaged parts should not be used.
⇒ Sharp edges may damage the cable.
⇒ Neither the Blum transformer nor any cabling should come into contact
with moving parts.
DANGER
Danger of electric shock
⇒ Never open a Blum transformer. There is a danger of electric shock.
WARNING
There is a danger of injury if the lever springs upward.
There is a danger of injury from the lever springing upwards when the front is
removed.
⇒ Do not push down on lever arm, remove it instead.
⇒ Do not connect the transformer to the power supply while the fronts are
unattached.
4
Structural changes and spare parts not approved by the manufacturer affect
the safety and functionality of SERVO-DRIVE for AVENTOS and are, therefore,
not allowed.
⇒ Only use original spare parts from Julius Blum GmbH.
⇒ Blum SERVO-DRIVE components are the only devices that should be con-
nected to the Blum transformer.
Structural changes
and spare parts
Disposal ⇒ All SERVO-DRIVE for AVENTOS electronic components, including the
battery, should be disposed of in a separate collection for electrical appli-
ances as per local regulations.
Function
⇒ Press on the front
╵→ The lift system opens
automatically
⇒ Press on the SERVO-DRIVE switch
╵→ The lift system closes automatically
⇒ Manual closing of the lift system
by moving it downwards
⇒ Manual opening of the lift system
by moving it upwards
Manual use
SERVO-DRIVE for AVENTOS supports the opening and closing of lift systems
in furniture.
The SERVO-DRIVE switch triggers the automatic opening and closing action of
SERVO-DRIVE for AVENTOS.
Electrical motion
support system
The lift system can be opened or closed manually without restrictions due to
the integrated free movement without damaging SERVO-DRIVE for AVENTOS.
5
* Alternative drilling
1) Only on the left side
Cabinet height
Do not glue the Blum distance bumper
Cabinet height
Recommendation for aluminium frames: Consider drilling Blum distance
bumper into the cabinet side.
A trial application must be carried out when fixing the Blum distance bumper
to the front.
Planning information Prefered position for distribution cable (AVENTOS HF)1)
Blum distance bumper
Blum distance bumper drilling position
For specific applications (low front
with high weight) several bumpers are
necessary.
Bumper must be installed near switch.
A trial application is recommended!
* From cabinet front edge for fronts that protrude below
6
H
480–549 mm KH x 0.3 - 28 mm
550–1.040 mm KH x 0.3 - 57 mm
AVENTOS HF AVENTOS HS / -HL
KH
AVENTOS HK
AVENTOS HF / -HS / -HL AVENTOS HK
1
Connecting piece
[2] half KB (KS 16–19mm) -193 mm
KB Cabinet width
KS Side panel thickness
CAUTION
A safety distance of 30 mm must be maintained
for air circulation; otherwise, there is a risk that the
Blum transformer could overheat.
The dimensions in the drawing take into account
the safety distance.
SERVO-DRIVE switchPlanning information
Cross stabiliser
Blum transformer safety distance
Cut to size dimension:
[1] KB (KS 16-19 mm) -193 mm and/or inner width -155 mm
7
AVENTOS HS AVENTOS HL
12 2
13
6 7 11
14
5
1 3 4
10
9
8
Installation in the front
Aluminium frame:
Installation in the cabinet side
Do not glue the Blum distance bumper
Assembly Blum distance bumper
Lift mechanism
Telescopic arm or lever arm
Drive unit with LED display
Blum transformer with LED display
Cover cap
Transformer unit housing
SERVO-DRIVE switch with battery display
Distribution cable for cutting to size
Connecting node
Cable end protector
Flex
Cabinet
Blum distance bumper
Front
Orientation diagram
8
1
2
3
4
7
5
8
6
9
10
13
11
14
12
3
2
1
✓✓
HFHSHLLOCKED
2
✓✓
75°
Distribution cableAssembly
Drive unitAdjustment
9
AVENTOS HF / -HS / -HL
AVENTOS HK
AVENTOS HF / -HS / -HL
AVENTOS HK
2
1
3
Drive unitAssembly
NOTICE
Before SERVO-DRIVE for AVENTOS assembly, the lift
mechanisms must be set so that the front remains open
in different positions.
The telescopic arm and/or lever arm must be in the completely open position
for drive unit installation.
If required, attach the opening angle stop only after drive unit installation and
before the reference run.
NOTICE
The drive unit can be locked when the orange slide
is no longer visible in the view window.
NOTICE
The drive unit can be locked once it is correctly located on the AVENTOS
mechanism.
✓
10
AVENTOS HF / -HS / -HL
AVENTOS HK
AVENTOS HF / -HS / -HL
AVENTOS HK
Questo manuale è adatto per i seguenti modelli
4
Indice
Altri manuali BLUM Servoazionamento
