BM PRO Trek3 Manuale utente
2
3
TEAM
BMPRO
.COM
POWERING YOUR ADVENTURES
With over 50 years’ experience in
power solutions combined with
manufacturing and design facilities in
Melbourne, Australia, BMPRO are the
leading experts in RV power and control
management.
Inspired by the great outdoors, we
have created a range of rugged, smart
and reliable products to power your
adventures.
Our range of battery, power and RV
management control systems gives
you peace of mind when you are on the
road, so that you can relax in even the
most far flung destinations, knowing
you have control over your power
needs.
To learn more about the BMPRO range
of products, please visit our website
teambmpro.com
4
Correct installation is the most critical factor in ensuring the safe use of the Trek3. If
every consideration of these instructions has been satisfied, the Trek3 will be safe to
operate.
Keep the Trek3 away from water or other liquids.
Clean the housing of this product lightly with a dry or moist cotton cloth. Do not use
alcohol, thinners, benzene or any other chemical cleaner. Do not allow any liquids to
enter the housing.
The Trek3 is a high precision electronic product. It contains no user-serviceable parts
inside. Do not try to dismantle, modify or repair it yourself. Disassembly, service or repair
by an unauthorised person will void the warranty.
Product specifications are subject to change and improve without notice.
SAFETY PRECAUTIONS
Please read the Safety Precautions before installing or using the Trek3. Be sure
to observe all precautions without fail. Failure to observe these instructions
properly may result in personal damage, or personal injury which depending on
the circumstances may be serious and cause loss of life.
5
6
CONTENTS
SAFETY PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . 4
ABOUT THE TREK3 . . . . . . . . . . . . . . . . . . . . . . . 8
OPTIONAL ADD-ONS . . . . . . . . . . . . . . . . . . . . . . 8
TREK3 SYSTEM DIAGRAM. . . . . . . . . . . . . . . . . . . . .9
DESCRIPTION OF PARTS. . . . . . . . . . . . . . . . . . . . . 10
MOUNTING THE TREK3 . . . . . . . . . . . . . . . . . . . . . 13
USING YOUR TREK3. . . . . . . . . . . . . . . . . . . . . . . 14
TREK3 SET-UP MODE . . . . . . . . . . . . . . . . . . . . . 15
CLOCK MENU FUNCTION . . . . . . . . . . . . . . . . . . . . 17
WATER TANK MENU FUNCTION . . . . . . . . . . . . . . . . . 18
CONFIGURING BATTERY CAPACITY. . . . . . . . . . . . . . . . 19
CONFIGURING BATTERY ALARM . . . . . . . . . . . . . . . . . 19
LCD BACKLIGHT . . . . . . . . . . . . . . . . . . . . . . . 19
FACTORY RESET . . . . . . . . . . . . . . . . . . . . . . . 20
SERVICING . . . . . . . . . . . . . . . . . . . . . . . . . . 21
FAQS AND TROUBLESHOOTING . . . . . . . . . . . . . . . . . . 21
APPENDICES . . . . . . . . . . . . . . . . . . . . . . . . . 22
ADVANCED MENU FUNCTIONS . . . . . . . . . . . . . . . . . 22
SPECIFICATIONS . . . . . . . . . . . . . . . . . . . . . . . . 24
COMPLIANCE . . . . . . . . . . . . . . . . . . . . . . . . . 25
WARRANTY TERMS AND CONDITIONS (AUSTRALIA) . . . . . . . . . 26
LIMITED WARRANTY TERMS AND CONDITIONS (USA). . . . . . . . . 27
Designed by BMPRO, one of Australia’s leading power solution experts, the BMPRO product range
is proudly designed and manufactured in Melbourne, Australia, and represent a high-quality
product that will provide years of service.
DISCLAIMER: BMPRO accepts no liability for any loss or damage which may occur from the
improper or unsafe use of its products. Warranty is only valid if the unit has not been modified or
misused by the customer.
Copyright © 2021
MANUAL PART 036089
REV 2.0
7
8
ABOUT THE TREK3
The Trek3 is a wall-mounted smart battery monitor designed specifically to
operate with BMPRO’s BatteryPlus35.
The Trek3 provides vital data at a glance including caravan battery voltage
and charging/discharging current. The Trek3 also provides an indication of
the battery’s remaining charge capacity as well as the time remaining before
the battery completely discharges - so you’ll never be left on the road without
battery power.
In addition to battery monitoring, the Trek3 enables monitoring of water levels
of up to four water tanks and control of two water pumps, all from a sleek, wall
mounted display.
The Trek3 can be connected to the included OdysseyLink103 to become part
of the Odyssey system. Once connected to the OdysseyLink103, you can use
BMPRO’s free Odyssey App to remotely monitor your battery and control your
caravan’s water pumps from your smartphone!
For more information about Odyssey, refer to your Odyssey Owner’s Manual.
Figure 1: The Odyssey system with Trek3
OPTIONAL ADD-ONS
To get the most out of your Trek3, it may be used with the following products
from the BMPRO range:
9Dipper water level indicator
9
TREK3 SYSTEM DIAGRAM
10
DESCRIPTION OF PARTS
q BATTERY
Displays the charging/discharging current and voltage of the caravan battery
connected to the BatteryPlus35.
The Battery display will flash if BMPRO’s BC300 External Shunt + CommLink has
been installed and communication with the BC300 is lost.
w BATTERY CAPACITY BAR GRAPH
Displays an estimate of the capacity of the connected battery, and underneath
indicates if the battery is ‘CHARGING’ or ‘DISCHARGING’.
e AC CONNECTED
Appears when the BatteryPlus35 is connected to AC mains.
r BATTERY LOW
Appears when the battery voltage falls below the low voltage warning threshold
and indicates that the battery requires charging.
By default, the low voltage warning threshold is 11V for lead acid batteries and
12.3V for LiFePO4 batteries. These thresholds can be configured.
Figure 2: The Trek3 Monitor
6
7
8
9
1011
12
13
1 2345
Altri manuali per Trek3
1
Indice
Altri manuali BM PRO Monitor
