HPCCS
INSTALLATION INSTRUCTIONS
INCLUDED IN THIS PACKAGE
Turn Power Off At Circuit Breaker Before Beginning Installation!
DO NOT LIFT FIXTURE BY CABLES!
INTRODUCTION:
The Boca Flasher’s HPCCS is perfect for color washing long
runs and large areas. LEDs are spaced 1.00"apart in a two
rows to create an even wide wash of light. The housing is
anodized aluminum and is weather and abrasion resistant.
This light xture can use any standard DMX 512 controller
or can incorporate Boca Flasher’s Digital Mainframe
controller (Demo Version Only). The Digital Mainframe
can run independently, creating many stand-alone color
washing and solid color eects, as well as responding
to DMX commands for total control of your lighting
experience.
MAINTENANCE:
Cleaning:
− Dry and Damp (IP65) Rated Fixtures:
To clean surface use a soft damp cloth.
− Wet (IP68) Rated Fixtures:
To clean surface use a soft cloth with mild soap and water.
Storage: Store in a dry, well-ventilated area when
product is not in use. Keep the electrical cord away
from heated surfaces when in use or not in use. If
cord shows signs of damage do not use, return
product to manufacturer.
Fixtures must be installed by a qualied
and licensed electrician in accordance with all
national, state and local electrical codes
and regulations. If any part of this manual
does not meet the necessary codes and
regulations, contact the factory for more
information before attempting to install.
ELECTRICAL SPECIFICATIONS:
1. Input Voltage: 90-120VAC or 230-277VAC
(See layout drawings for spec.)
2. Total linear ft per 20A breaker: 55ft
3. Total linear ft per 15A breaker: 40ft
4. Input Current: 272mA RMS per linear ft for RGB,
272mA RMS per linear foot for WM
Page 2 of 7
HPCCS Indoor/Outdoor Line Voltage
12Mounting Brackets
(2 brackets per xture) 3
HPCCS
Job Specic Drawings
Max temp: 55°C
Min. temp: -40°C
DAMPLISTING
IP65
WET LISTING
IP68
model dependent
HPCCS Fixtures
(In lengths shown on job specic drawings)
or
Fixed
Hinged
DMX Cables are 5ft long
