Body Craft F603 Istruzioni operative
FLAT/INCLINE BENCH ASSEMBLY MANUAL
MODEL F603
MA712
Bodycraft is a division of Recreation Supply Inc.
P.O. BOX 181
Sunbury, OH 43074
QUESTION?
As a quality home gym supplier we are committed to your complete satisfaction. If you have
questions, or find missing or damaged parts, we will guarantee your complete satisfaction through
our authorized dealer service centers or our home office customer service department. Please call
your local dealer for assistance or BodyCraft at 800-990-5556 (9:00 AM - 5:00 PM). Our trained
technicians will provide immediate assistance to you, free of charge.
BEFORE YOU BEGIN
Congratulations and thank you for selecting the BODYCRAFT F603 BENCH.
The BODYCRAFT F603 BENCH offers an impressive array of strength
training exercises to develop every major muscle group of the body.
Whether your goal is cardiovascular fitness, a shapely, toned body or dramatic
muscle size and strength, the BODYCRAFT F603 BENCH will help you
achieve the specific results you want.
For your safety and benefit, read this manual and the accompanying literature
before using the BODYCRAFT F603 BENCH. Keep this manual for future
reference. If you have additional questions, please call your local BODYCRAFT
dealer or our customer service department at 800-990-5556 Monday through
Friday, 9 a.m. until 5 p.m. Eastern Time.
IMPORTANT SAFETY NOTES
1
There is a risk assumed by individuals who use this type of equipment.
Before beginning this or any other exercise program consult your physician.
This is especially important for individuals over the age of 35 or persons
with pre-existing health problems. Recreation Supply, Inc. assumes no
responsibility for personal injury or property damage sustained by or
through use of this product.
1.This product must be assembled on a flat, level surface to assure its
proper function.
2.Clean pads and frame on a regular basis. We recommend warm,
soapy water. Do not use harsh or abrasive chemicals.
3.Inspect and tighten all parts before every use. Replace any worn
parts immediately. Failure to do so may result in serious injury.
4.Keep children away from the BODYCRAFT F603 BENCH at all times.
5.Keep your hands away from moving parts other than the designated
handles.
6.When adjusting the seat, make sure the spring pin is fully engaged.
If not, the seat may slip and cause serious injury.
7.Exercise with care to avoid injury.
8.If unsure about the proper use of the BODYCRAFT F603 BENCH
strength training system call your local BODYCRAFT dealer or our
customer service department at 800-990-5556.
16
20
1
11
21
26
21
26
17
18
22
22
14
14
22
24
11
5
8
8
6
7
2
10
23
23
20
20 23
23
10
23
19
22
22
24
18
23
23
25
19
25
9
3
4
12
12
15
20
20
20
23
23
13
OVERVIEW
2
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
1
1
1
1
1
1
1
2
1
2
2
2
1
2
1
1
1
2
2
8
2
6
12
3
2
2
REAR FRAME
BASE FRAME
BACK SUPPORT FRAME
BACK ADJ. SLIDER
HANDLE BAR
BACK PAD
SEAT PAD
SHEET NONSLIP
HAND GRIP
SLEEVE
WHEEL
RECT. PLASTIC BUSHION
45 X 75mm END RECT. PLUG
STEEL BUSHION
SPRING KNOB
LONGER POP PIN
1/2" X 4-1/2" HEX BOLT
1/2" X 4" HEX BOLT
3/8" X 4-1/2" HEX BOLT
3/8" X 1" INNER HEX SCREW
5/16" X 1-1/2" HEX BOLT
1/2" WASHER
3/8" WASHER
1/2" NYLON NUT
3/8" NYLON NUT
5/16" NYLON NUT
PARTS LIST
NO. DESCRIPTION QTY.
01/4 1/2 3/4 1/4 1/2 3/4 1/4 1/2 3/4 1/4 1/2 3/41" 2" 3" 4" 1/4 1/2 3/4 1/4 1/2 3/45" 6"
(inch)
3
1 2
3
4
5
6
8
9 10 11
12 13 14 15 16
17
18
19
20 22 24
21 23 25
26
7
STEP 1
4
1. Attach the Rear Frame (1) to Base Frame (2) using two 1/2" X 4"
Hex Bolts (18), four 1/2" Washers (22) and two 1/2" Nylon Nuts (24).
18
22
22 22
22 24
1
2
STEP 2
5
1. Attach the Back Support Frame(3) to the Base Frame (2) using one
1/2" X 4-1/2" Hex Bolt (17), two 1/2" Washers (22), and one 1/2" Nylon
Nut (24). Tighten this bolt and loosen just enough for the Back
Support Frame (3) to rotate freely.
2. Attach the 3/8" X 4-1/2" Hex Bolt (19), two 3/8" Washers (23), one
Sleeve (10), and one 3/8" Nylon Nut (25) to the lower set of holes in
the Back Support Frame (3) as shown. This bolt and sleeve do not
attach to the Base Frame (2).
3
10
24
22
22
17
2
23
23
25
19
STEP 3
6
1. Attach the Back Pad (6) to the Back Adj. Slider (4) using four 3/8" X 1"' Hex
Threaded Bolts (20), and four Washers (23). Slide the Back Adj. Slider (4)
onto the Back Support Frame (3) and lock it into place at your desired
height using the Spring Knob (15).
2. Attach the Seat Pad (7) to Base Frame (2) using three 3/8" X 1" Hex
Threaded Bolts (20), and three 3/8" Washers (23).
3. Slide the Handlebar (5) into the hole in the top of the Back Support Frame
(3) and secure using one 3/8" X 1" Inner Hex Screw (20).
20
23
15
5
20
23
20 23
20
20
23
23
4
3
6
7
2
Altri manuali per F603
1
Indice
Altri manuali Body Craft Palestra domestica
Body Craft
Body Craft F602 Manuale utente
Body Craft
Body Craft V2 Manuale utente
Body Craft
Body Craft VR500 Pro Manuale utente
Body Craft
Body Craft ELITE STRENGTH Manuale utente
Body Craft
Body Craft K2 Manuale utente
Body Craft
Body Craft X2 Manuale utente
Body Craft
Body Craft MINI-XPress 7351 Manuale utente
Body Craft
Body Craft Dip Station F415 Manuale utente
Body Craft
Body Craft F620 Manuale utente
Body Craft
Body Craft LEVER GYM PL1000 Manuale utente
Body Craft
Body Craft MA2141 Manuale utente
Body Craft
Body Craft PFT Manuale utente
Body Craft
Body Craft OWNER'S MANUAL Manuale utente
Body Craft
Body Craft VR400-RW45 Manuale utente
Body Craft
Body Craft GX Manuale utente
Body Craft
Body Craft SW-95.0225-G Manuale utente
Body Craft
Body Craft 5042 Manuale utente
Body Craft
Body Craft F680 Manuale utente
Body Craft
Body Craft Multi Gym GX Manuale utente
Body Craft
Body Craft F601 Manuale utente
