Bogen PCM-TIM Guida rapida
Bogen PCM-TIM Overhead Paging System Configuration
You must connect the 8x8 adapter to a Tel Line or 90v NGT RNG port before configuring the Bogen
PCM-TIM Overhead Paging System. Refer to the Bogen Instalation manuals here
Objective
Configuring a Bogen PCM-TIM overhead paging system for 8x8 services.
Applies To
Bogen PCM-TIM overhead paging system (FXS Mode Only)
Bogen PCM Series
There are 3 Bogen PCM models and differing version releases. Refer to this link to few Here
Procedure
There are two versions or Hardware revisions of the Bogen PCMTM. Refer to the images
below step 3 to identify the revision being configured. Both of the images are FXS Only.
Follow the Bogem Manual for proper instalation
1. Ensure that only DIP Switch 6 is ON Version 1.
2. Ensure that DIP Switch is set to Station Version 2
3. Using the phone line or RJ11 cable, connect your 8x8 adapter to the Tel Line (v1) or 90v NGT RNG (V2) port.
Version 1 Version 2
https://support.8x8.com/equipment-devices/overhead-paging/bogen-pcm-tim-overhead-paging-system-configuration-for-8x8-s…
Updated: Tue, 23 Aug 2022 13:11:33 GMT
Powered by
1
Altri manuali per PCM-TIM
2
Indice
Altri manuali Bogen Microfono
Bogen
Bogen HDU250 Manuale utente
Bogen
Bogen DDU250 Manuale utente
Bogen
Bogen MGN19 Manuale utente
Bogen
Bogen PCM2000 Manuale
Bogen
Bogen MHH Manuale utente
Bogen
Bogen UDMS800HH Manuale utente
Bogen
Bogen UDMS800HH Manuale utente
Bogen
Bogen MGN19 Manuale utente
Bogen
Bogen BCLM1 Manuale utente
Bogen
Bogen PCM2000 Manuale utente
Bogen
Bogen GDU150 Manuale utente
Bogen
Bogen HCU350 Manuale utente
Bogen
Bogen MBS1000A Manuale utente
Bogen
Bogen HDO100 Manuale utente
Bogen
Bogen HDU150 Manuale utente
Bogen
Bogen DDU250 Manuale utente
Bogen
Bogen SCU250 Manuale utente
Bogen
Bogen WCU250 Manuale utente
Bogen
Bogen UDMS800BP Manuale utente
Bogen
Bogen PCM2000 Manuale utente
