Boland Viewport v084a Manuale utente

VIEWPORTMonitors

Premium Active-Matrix LCD Video Screens

User Manual

Broadcast V-series:

8.4" Model v084a (525/625)

8.4" Model xv084a (525/625)

10.4" Model v104f (525/625)

12.1" Model v121c (525/625)

15.1" Model v150b (525/625)

15.1" Model v150bWVA (525/625)

Lake Forest, CA 92630 (800) 918-9090 (949) 465-9911 Fax: (949) 465-9944 www.bolandcom.com

4 VIEWPORT Manual v8101215c4.

VIEWPORT Specifications

Video-Only Screens 8.4, 10.4", 12.1", and 15.0"

(All models have a rackmount option.) model v150

Models:

Active Area (Diagonal):

Video Modes:

Scan:

User Controls:

Video Input Signals (nominal):

Video Connectors:

Brightness, typical, 0°:

Contrast Ratio, 0°:

Window (Display Area):

Protective Screen Cover:

Light Source (standard):

Pixel (RGB Trio) Arrangement:

Pixel (RGB Trio) Pitch:

Viewing Angle, contrast >10:1 :

Response Time, max (tr/tf):

Optional Remote Controls:

DC Power:

DC Connector (center +):

AC Power:

AC Connector:

Cabinet (whd, less knobs):

Mounting:

Weight:

Temperature, Operating:

Temperature, Storage:

Case Color:

Case Material:

v084a Video Monitor

extra brite

8.4" / 21.4 cm

NTSC/PAL/SECAM (autoselect)

525/60, 625/50 Comp & Y/C

Menu: Bri,Cnt,Col,Tnt...

1.0 Vpp, 75?

BNCx2, (auto-term loop-thru)

4-pin DINx1 (Y/C S-video)

450 nts (cd/m²)

500:1 (high contrast)

6.728x5.047" / 171x128 mm

Non-Glare, Washable

2 CCFL, 40,000+ hours

640 (1920) x 480, Stripe

0.089x3 x 0.267 mm

±55°H; +40°, -70°V

25/10 ms (typ. tr/tf) (fast)

Infrared (IR) or RS-232

12 volts (10.0~15.0 V), 16 watts

XLR-4 Female (1=gnd, 4=+12)

90-264 VAC, 50/60 Hz

IEC-320 Male

8.400" x 6.757" x 2.00"

¼-20, 10-32x4 / 4 RU

3.15 lbs / 1.43 kg (per screen)

0 ~+60° C

-20 ~+70° C

Textured Semi-Gloss Black

Aircraft Aluminum

xv084a Hi-Res Video Monitor

extra brite

(also for xv084ax2 Twin)

8.4" / 21.4 cm

NTSC/PAL/SECAM (autoselect)

525/60, 625/50 Comp & Y/C

Menu: Bri,Cnt,Col,Tnt...

1.0 Vpp, 75?

BNC (auto-term loop-thru)

4-pin DINx1 (Y/C S-video)

400 nts (cd/m²)

400:1 (high contrast)

6.728x5.047" / 171x128 mm

n/a

4 CCFL, 40,000+ hours

1024 (30720) x 768, Stripe

0.0555x3 x 0.1665 mm

±85°H; ±85°V

12/13 ms (typ. tr/tf) (fast)

Infrared (IR) or RS-232

12 volts (11.4!14.4 V), 16 watts

XLR-4 Female (1=gnd, 4=+12)

90-264 VAC, 50/60 Hz

IEC-320 Male

8.174" x 6.757" x 2.10"

10-32x4 / 4 RU if RackMt

3.15 lbs / 1.43 kg (per screen)

0 ~+60° C

-20 ~+70° C

Textured Semi-Gloss Black

Aircraft Aluminum

v104f Video Monitor

extra brite

10.4" / 26.42 cm

NTSC/PAL/SECAM (autoselect)

525/60, 625/50 Comp & Y/C

Menu: Bri,Cnt,Col,Tnt...

1.0 Vpp, 75?

BNCx2, (auto-term loop-thru)

4-pin DINx1 (Y/C S-video)

400 nts (cd/m²)

400:1 (high contrast)

8.31x6.24" / 211x159 mm

Non-Glare, Washable

2 CCFL, 40,000+ hours

640 (1920) x 480, Stripe

0.110x3 x 0.330 mm

±60°H; +40°, -50°V

20/5 ms (typ. tr/tf) (fast)

Infrared (IR) or RS-232

12 volts (11.4~14.4 V), 11 watts

XLR-4 Female (1=gnd, 4=+12)

90-264 VAC, 50/60 Hz

IEC-320 Male

9.95 x 7.90 x 1.80"

¼-20, 10-32x4 / 5 RU

3.4 lbs / 1.53 kg

0 ~+65° C, 10,000 ft/3,000 m

-20 ~+80° C, 50,000ft/15,000m

Textured Semi-Gloss Black

Aircraft Aluminum

v121c Video Monitor

brite

12.1" Composite, S-Video

NTSC/PAL/SECAM (autoselect)

525/60, 625/50 Comp & Y/C

Menu: Bri,Cnt,Col,Tnt...

1.0 Vpp, 75?

BNCx2, (auto-term loop-thru)

4-pin DINx1 (Y/C S-video)

300 nts (cd/m²)

200:1

9.69 x 7.26" / 246x184 mm

Non-Glare Glass washable

2 CCFL, 50,000+ hours

800 (2400) x 600, Stripe

0.308 x 0.308 mm

± 55°H; +40°, -45°V

20/35 ms

Infrared (IR) or RS-232

12 volts (10.0~15.0 V), 19 watts

XLR-4 Female (1=gnd, 4=+12)

90-264 VAC, 50/60 Hz

IEC-320 Male

11.3 x 9.4 x 1.7"

¼-20, 10-32x4 / 6 RU

4.25 lbs / 1.93 kg

0 ~ +50°C

-20 ~ +60°C

Textured Black Semi-Gloss

Aircraft Aluminum

v150b/v150bWVA Video Monitor

extra brite, wide angle

15.0" Composite, S-Video

NTSC/PAL/SECAM (autoselect)

525/60, 625/50 Comp & Y/C

Menu: Bri,Cnt,Col,Tnt...

1.0 Vpp, 75?

BNC, (auto-term loop-thru)

4-pin DINx1 (Y/C S-video)

450/450 nts (cd/m²)

400:1/500:1 (high contrast)

11.97 x 8.89" / 304x226 mm

Non-Glare / n/a

4/6 CCFL, 50,000+ hours

1024 (3072) x 768

0.300x0.300 mm, 16.7M Colors

±70°H;+60°-65°V/±88°H&V

12/12 ms (high speed) (wht to blk)

Infrared (IR) or RS-232

12 volts (10.0 ~ 15.0 V),30/36 watts

XLR-4 Female (1=gnd, 4=+12)

90-264 VAC, 50/60 Hz

IEC-320 Male

14.30 x 11.25 x 1.95"

¼-20, 10-32x4 / 7 RU

6.4 lbs / 2.9 kg

0 ~ +50°C, ?10,000 ft/300 m

-20 ~ +60°C, ?40,000 ft/12000m

Textured Black Semi-Gloss

Aircraft Aluminum

(Specifications are subject to change without notice.) 12.03.05

BOLAND COMMUNICATIONS •Lake Forest, CA 92630 •(800) 918-9090 •(949) 465-9911 •Fax: (949) 465-9944 •www.bolandcom.com 2

Contents

Contents 1

one Description

•overview 2

•features 2

•customer support 2

two Installation

•supplied items 3

•handling 3

•system requirements 4

•installation and connections 4

three Operation 5

•controls & connections 6

•controls functions table 7

four Maintenance

•cleaning 9

•factory service 9

•warranty repair 9

•warranty terms 10

five Specifications cover

VIEWPORT Manual v8101215c4. 1

Description

1 description

• overview

The BOLAND Combi VIEWPORTS are high

performance LCD video displays for

computer and motion video display.

Incorporating Active Matrix Thin Film

Transistor (AMTFT) drive technology,

these display panels are completely self-

contained for replacing CRT-type

monitors. Active Matrix means no LCD

lag or smear on moving video pictures.

Operating in NTSC/PAL composite and

Y/C video modes, the monitors

are compatible with CRTs, but may be

installed anywhere, including compact,

space-saving places at low power. The

display quality is excellent for both natural

and graphic video. The monitors come

with integral non-glare glass screens, and

compliment the 4" and up to 30"

VIEWPORT family of LCD Video and

Computer monitors. All offer the size,

brightness and clarity necessary for

extended daily use.

• features

Compact, Mounts Anywhere

Light Weight

Rugged

Low Power, Instant On

Transportable

Plug & Pin-compatible to CRT displays

High Contrast

Built-in Speakers (option)

Model v150b Video Monitor

• customer support

Boland provides a full range of support

from sales through installation and use of

our products. We are here to help. Our

office hours are extended, in the Pacific

time zone (GMT+8 in winter, +7

summmer). To reach us:

BOLAND COMMUNICATIONS

(949) 465-9911, or

(800) 918-9090,

(949) 465-9944 [fax]

or: [email protected]

2VIEWPORT Manual v8101215c4.

Installation

2 installation

• supplied items

Supplied with your standard-model LCD

Monitor is a desk-top 12 volt regulated

power supply/power cord or mating DC

plug (aviation), and this instruction

manual.

Available options may include: 9-36 VDC

power, SD/HD SDI, high brightness (1850

nts), remote Controls (RS-232, IR), VESA

or rack mounts, and desk stands.

• handling

A VIEWPORT display is rugged. As a

precaution though, please consider the

following general characteristics of

AMTFT LCDs. These are not defects or

malfunctions:

Please handle the panel with care.

Since the panel is made of glass, sharp

blows to the screen, failure after dropping

onto a hard surface, etc., are not covered

by the warranty.

High voltages are present inside the

cabinet for the fluorescent lighting. There

are no fuses or other user-serviceable

parts inside. Do not remove any screws

or disassemble the cabinet to stay safe

and to retain the warranty.

Use only factory-specified power supplies

for powering the panel.

A wet, condensing atmosphere (dew or

fog) should be avoided. If you require

routine operation in these conditions,

please consult the factory (optional

cabinets are available).

Note the normal operating and storage

temperatures in the specification. Do not

place the unit in the sun, as the black

cabinet absorbs much heat. Extreme

temperatures, just as uncomfortable for

people, will cause degraded performance

or permanent LCD damage. Extended

temperature models are available.

Please also take care to avoid

electrostatic discharges.

When a panel is not installed, place it in

its packing material or place it face down

on a smooth table.

After several thousand hours of operation,

the special internal fluorescent lamps will

eventually taper in their brightness. Please

consult the factory for replacement.

Over long periods of time, some changes

in luminance uniformity or small dots may

become visible, depending on image

content.

Avoid fixed video patterns for extended

periods of time. Some image retention

may occur. If possible, use an interesting

screen saver or black.

Please handle cables and connectors with

care. Please replace worn cables with

standard, locally-available parts (see

power supply substitution caution).

Note that although the screen is glass, it is

still somewhat sensitive to scratching.

Please clean the screen with a soft cloth

slightly dampened with water or, if

necessary, Windex

®or 409®household

cleaners.

VIEWPORT Manual v8101215c4. 3

Installation

• system requirements

Video Series monitors operate on DC or

AC power and come with a universal AC

power supply. Signal inputs are

composite video signal into a BNC, or S-

Video (Y/C) into a 4-pin mini-DIN (or "S")

connector.

Monitors will display 525 and 625 NTSC,

PAL, or SECAM standard video signals

at a nominal 1.0 Vpp (terminated). Dual

(loop-thru) BNC connectors with auto-

matic termination (75 ) is used on the

12" and 15" models. (The "C" com-

ponent of the Y/C signal is 0.7 Vpp

nominal.)

Other Boland monitor models are also

available for displaying PC signals, and

have many significant features, such as

built-in scalers, all TV standards included,

scan reverse, aspect ratio adjust, digital,

HDTV connections, and many more.

• physical mounting

When mounting the panel on a flat

surface, allow clearance for any

connection cords on the rear. In the

corners on the backside of cabinets are

10-32 threaded inserts for accepting

mounting screws. Use ½" long pan head

screws, or you may use any other length

10-32 screws to accommodate mounting

surface depth requirements, but the

screw may not penetrate the panel

cabinet by more than 3/4" (0.75")

maximum, or the monitor may be

damaged. Also, a ¼-20 threaded socket

is on the bottom side.

The LCD monitor cabinets dissipates only

a few watts (see specifications), so no

special cooling or ventilation is required

The mounting location may usually be

completely enclosed. But avoid any

mounting situations or other nearby heat

or environmental heat sources that may

cause the monitor's operating location to

exceed 122°F/50°C.

• connections (see photo, page 5)

VIEWPORT LCD monitors connect like

CRT-type monitors. The connections

are video and power:

Power Connection

Insert the barrel or XLR plug from the

power supply into the 2.5 mm jack on

the back of the panel. The AC side of

the power supply will accept 100-240

VAC, 50/60 Hz (universal power cord).

Video Connections

VIEWPORTS have a four-pin mini-DIN

jack for S-Video. Composite is input at

BNC connectors. A single BNC

connector is used on the 10". Loop-

thru BNC connectors are used on the

12" & 15" (automatic 75 termination.)

4VIEWPORT Manual v8101215c4.

Installation/Operation

Monitor Backside, Connector Well Area, 15.1" Monitor. (Picture also shows VGA connector used on some models)

3 Operation

Your VIEWPORT Monitor's On-Screen

menu provides for normal opertional

adjustments. These user adjustments

are stored/memorized separately for

Composite, and Y/C S-Video, and again

separately for each in both NTSC and

PAL modes.

For video operation, set the Brightness

to just be able to see the blackest

portions of the video image, the

Contrast to bring the whitest areas of

an image to just less wash-out, and

Color and Tint (for NTSC) for pleasing

flesh tones.

Push the menu button to bring up the

menu and to step down through the list.

Starting on the subsequent pages are

all the menu choices and a description

of each step.

The use of each button is listed on the

next page.

VIEWPORT Manual v8101215c4. 5

Operation

Controls and Connections

Monitor Front Side:

1Power On/Off

When power is applied, the monitor will

come on. This button then turns the

monitor on and off.

2Menu On/Off

This button is used to bring up the

controls menu. It will also clear the

menu from the screen, saving the new

settings chosen.

3Select Down / Contrast -

Advance down the menu list with this

button.

Without pushing the MENU button first,

this button is direct access (1) to

reduce Contrast.

4Select Up / Contrast +

This is used to move up through the

menu list.

Without pushing the MENU button first,

this button is direct access (1) to

increase Contrast.

5Decrement / Input Select

Use to reduce (-) the amount of the

highlighted item. For some items, this

selects 'No' or 'Off'.

Without pushing the MENU button first,

this button is direct access (2) to select

PC display.

6Increment (Enter) / InSelect

Pushing this button increases (+) the

amount of the chosen item. For some

types of items, the button will chose

'Yes' or 'Accept'.

Without pushing the MENU button first,

this button is direct access (2) to select

the available Video input (either comp

or S-, depending upon the other menu

choice and presence of either signal).

7Panel LED

The status LED has four indications:

Dark- No Power, Red- Start or No

Signal, and Green- Normal operation.

Monitor Back Side:

1Input Connector Well, Power

(Recessed wiring location for all cables)

Place the plug from the world-wide AC

power supply (included) into the DC

12V connector. Input power to the

monitor from any other "12 volts" DC

source within the specifications (see the

last page table for details).

2Input Video BNC and Y/C

Connectors

Attach the video cord(s) from cameras,

VCRs, PC or other sources to the BNC

or Y/C (S-Video) connectors.

3Optional Audio and Speaker(s)

Audio inputs are high impedance. On

the 10.4" the two white RCA jacks are

connected together; they will add two-

plug stereo together for monaural. For

the 12.1" and 15.1", jacks are left

(white) and right (red). Inserting only a

single plug will feed both speakers.

4Mounting Keyholes (optional)

You may hang monitors on a screw

head or nail head on a wall. Do not

insert the screw's head deeper than ¼"

(6 mm).

5Threaded Mounting Sockets

The corner threaded sockets are for

mounting the monitor. You may mount

monitors in any orientation. The

screws must not insert deeper than ¼"

(6 mm). The threads are 10-32.

6¼-20 Threaded Mounting

Socket

For flexibility in mounting, you may use

this bottom-side threaded socket for

locating the monitor on a tripod (like an

SLR or video camera, or other CCTV

mounting arm or device). Do not insert

the screw head deeper than 3/8" (8 mm).

Not recommended for use in vehicles.

6VIEWPORT Manual v8101215c4.

Position :

Image up/down :Use ^/down to move the image vertically

Image left/right :Use </> to move the image horizontally

Language :Select OSD menu language display

1. English

2. Danish

3. Chinese (Simplified)

Video source :Select the input video signal

Composite Video /S-Video

Volume :

Adjust the audio volume level (functions only if the audio option installed)

Utilities :

User Setting :User Timeout :adjust the OSD menu timeout period in steps of 5seconds,

from 5 minimum up to 50 seconds maximum (5 or 10 is Normal).

DPMS (Desktop power management system) :Diable /Enable (Enable is Normal)

Disable :The panel backlight always on when no video input.

Enable :The panel backlight will turn off when no video input.

Display Input :Disable /Enable the input source name on screen (Enable is Normal)

Auto Source Select :Off -Disable auto source select function (video signal seeking).

(High is Normal) Low -Auto source select enabled (seek) ONLY at power up.

High -Auto source select ALWAYS enabled (will seek upon loss).

Gamma :1.0 /1.6 /2.2 (1.0 is Normal)

OSD Setting :OSD Horz Position :move the OSD menu horizontally

OSD Vert Position :move the OSD menu vertically

OSD Background :Translucent /Opaque

Direct Access #1: Define the hot key function (“<” and “>“) for one of the following

adjustments :Brightness /Contrast /Volume /Video Source* (Source is Normal)

Direct Access #2: Define the hot key function (“^”and “down“) for one of the following

adjustments :Brightness /Contrast /Volume/ Video Source (Contrast is Normal)

Load Factory Defaults :Recall factory default settings. (Emergency only)

*By pressing the hot key, the source is in sequence of Composite Video/S-Video.

Exit menu

The OSD settings chosen will be stored in memory. The OSD menu can be cleared from the screen by

moving the selection bar to the EXIT icon, and pressing the > button. Otherwise it will automatically clear

after a few seconds (time-out period) of non-use.

OSD Functions

Brightness and Contrast :

Brightness Increase/decrease brightness in the blackest areas of the picture

Contrast Increase/decrease brightness in the whitest areas of the picture

Color Temperature :9500K /8000K /6500K /5000K (8000 is the Normal setting.)

Adjust the "warmth" of the displayed image. The higher the temperature, the "bluer" the image looks like.

The lower the temperature, the warmer (more reddish) the image looks like.

Video Adjustment :

Color: adjust video colorlevel

Tint: adjust video tint level

Sharpness: adjust video image sharpness level

Video System :Select video system and input signals

AUTO :automatic detection of NTSC and PAL system and SECAM system

NTSC /NTSC 4.43 :manual select NTSC system

PAL /PAL M:manual select PAL system

SECAM :manual select SECAM system

Nominal Settings

v084a, xv084a, v104f, v121c, v150b, WVA 09.15.05

Icon Parameter NTSC

Composite NTSC

S-Video PAL/SECAM

Composite

1Brite / Contrast Brightness 50 50 50

10.4" 12" 15" 10.4" 12" 15" 10.4" 12" 15"

Contrast 50 30 50 50 30 50 50 30 50

2Color

Temperature (list) 8000 8000 8000

3Video

Adjust Color 40 40 40

Tint 000

Sharpness 333

4Video System (list) Auto Auto Auto

5Position (arrow keys) (Auto: default) (Auto: default) (Auto: default)

6Language (list) English English English

7Input Select (list) Composite Video S-Video Composite Video

8Volume

(optional) (value) 000

9Utilities User Setting Timeout 10 10 10

Display Input Enable Enable Enable

DPMS Enable Enable Enable

Auto Source

Select High High High

Gamma 1.0 1.0 1.0

OSD Setting OSD

Horz Position 100 100 100

OSD

Vert Position 100 100 100

Background Translucent Translucent Translucent

Direct Access #1

(list) Video Source Video Source Video Source

Direct Access #2

(list) Contrast Contrast Contrast

Load

Defaults (yes/no) Don't Load Don't Load Don't Load

10 Exit (yes/no) (push ">" to exit,

Menu to continue) (push ">" to exit,

Menu to continue)

\PARTS\8.PDF BOLAND COMMUNICATIONS

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali Boland Monitor

Boland

Boland BVB Series Manuale utente

Boland

Boland TP Series Manuale utente

Boland

Boland v056 Manuale utente

Boland

Boland BVB4K-31 Manuale utente

Boland

Boland 6.5"- DHD65DB & LED Manuale utente

Boland

Boland 4K49aHDR5 Manuale utente

Boland

Boland BVB4K-55 Manuale utente

Boland

Boland PVB17 Manuale utente

Boland

Boland ViewPort d084c Manuale utente

Boland

Boland VIEWPORT v4x4b Manuale utente

Boland

Boland Vp Series Manuale utente

Boland

Boland BVB07 Manuale utente

Boland

Boland LVB32 Manuale utente

Boland

Boland BVB4K-65 Manuale utente

Boland

Boland BVB4K-24 Manuale utente

Manuali Monitor popolari di altre marche

Linear Acoustic

Linear Acoustic LQ-1000 Manuale utente

AOC

AOC I2579V Manuale utente

Gateway

Gateway FPD1520 Manuale utente

Furuno

Furuno Mu 120c Manuale utente

Asus

Asus VB171D - 17" LCD Monitor Manuale utente

Dell

Dell S2230MX Istruzioni utente

Philips

Philips 107C64 Manuale utente

Dell

Dell S2409WFP Manuale utente

EverFocus

EverFocus EN-7517E Manuale utente

Panasonic

Panasonic TH152UX1 - 152" PLASMA TV Manuale utente

Dell

Dell Precision 7680 Manuale di istruzioni

LG 50PM1M - - 50" Plasma Panel Manuale utente

Bosch

Bosch DDU 9 Manuale utente

Acer

Acer A231HL Manuale utente

Philips

Philips 86BDL4152T Manuale utente

NEC

NEC AccuSync LCD5V Manuale utente

Emay

Emay SleepO2 Manuale utente

IBM

IBM 6360 Istruzioni per l'installazione

Boland viewport v084a Manuale utente

Manuali Monitor popolari di altre marche