Bolid RS-FX-MM Manuale utente

SERIAL RS-232 / RS-422 / RS-485 FIBER OPTIC MODEM

RS-FX-MM, RS-FX-SM40

OPERATIONS MANUAL

1DESCRIPTION AND OPERATION

1.1 Product Purpose

1.1.1 RS-FX-MM / RS-FX-SM40 Serial RS-232 / RS-422 / RS-485 Fiber Optic Modem (hereinafter

referred to as the modem) is designed to convert a standard RS232 / RS485 / RS422 signal to a fiber optic

link to extend the signal up to 40 Km.

1.1.2 The modem is intended for round-the-clock operation.

1.1.3 The modem is classed as non-repairable and periodically serviced equipment.

1.1.4 The modem’s design doesn’t imply operating it in aggressive and dusty environments or in

explosion and fire hazardous premises.

1.2 Specifications

Table 1.2.1

Parameter Value

1.2.1 Power input 1

1.2.2 Power supply voltage 12 through 48 Vdc

1.2.3 Power rate 5 W max

1.2.4 Start-up time 10 s

1.2.5 Data rates 300 through 115200 bps

1.2.6 Fiber range: - RS-FX-MM

- RS-FX-SM40

2 km

40 km

1.2.7 Fiber optic cable: - RS-FX-MM

- RS-FX-SM40

Multi-mode 50/125

Single-mode 9/125 µm

1.2.8 Fiber connector SC/PC

1.2.9 Optic wavelength 1,310 nm

1.2.10 Serial range: - RS-232

- RS-422, RS-485

15 m

1,000 m

1.2.11 Orion ISS devices per a single RS-485 interface bus 127 max

1.2.12 Enclosure protection degree as per GOST 14254-2015 IP20

1.2.13 Resistance to mechanical exposure as per OST 25 1099-83 Arrangement Category III

1.2.14 Vibration exposure: - Frequency range

- Max acceleration

1-35 Hz

0.5 g

1.2.15 Environmental category as per OST 25 1099-83 О3

1.2.16 Operation Temperature Minus 30 to + 55°С

1.2.17 Weight 0.3 kg max

1.2.18 Overall dimensions 95

29 mm

1.2.19 Non-stop operation 24/7

1.2.20 MTBF 80,000 h min

1.2.21 Survival probability 0.98758

1.2.22 Expected service life 10 years

1.2.23 In terms of immunity to electromagnetic interference, the equipment meets the requirements of

Test Severity Level III as per the relevant standards listed in Appendix ‘Б’ to GOST R 53325-2012.

1.2.24 The equipment passes the industrial interference standards prescribed for Class ‘Б’ equipment as

per GOST R 30805.22.

1.2.25 The modems are to be powered from battery backed power supplies RIP-12 or RIP-24 (of series

approved by Fire Certificates) that send faults occurred in the power supply line to an alarm loop of a

control and indicating equipment (such as Signal-10, Signal-20М, Signal-20P) or to the network controller

(S2000Мcontrol panel or Orion Pro Software Suite).

1.3 Scope of Delivery

The modem comes along with the parts shown in Table

1.3.1.

Table 1.3.1

Item Q-ty, pcs.

RS-FX-MM

RS-FX-SM40 1

Operations Manual 1

Resistor С2-33Н-0.25-620 Ohm 5% 3

Wall Mount Bracket 1

Screw 2

Wall plug 2

2INTENDED USE

2.1 The design of the modem meets the requirements of fire and electrical safety including operation in

emergency in accordance with GOST 12.2.007.0-75 and GOST 12.1.004-91.

2.2 Do shut off the mains power from the modem before mounting, installing, and maintaining this one.

2.3 Operating restrictions, design, mounting, connecting, settings, testing and operation

procedures for the modem are defined in details in its User’s Manual (the full version),

which is available online at bolid.ru in the section Products on the page of

RS-FX-MM, RS-FX-SM40 and in the mobile app ‘Mobile Product Catalogue’

https://bolid.ru/support/mobile-catalogue/.

2.4 If a technical failure of the modem has been found, the equipment shall be taken out of operation and

sent for repair in accordance with Section 4.

3MAINTENANCE

3.1 The modem shall be maintained by persons qualified for Accident Prevention of Level II or higher.

3.2 The maintenance procedures to be performed are described in RS-FX-MM / RS-FX-SM40 User’s

Manual (the full version, please see Section 2.3 of this manual).

4REPAIR

4.1 Repair of faulty equipment is to be performed by the manufacturer or in authorized repair centers. The

equipment shall be sent for repair in compliance with Company Standard QMS 8.5.3-2015, which can be

found online at our website https://bolid.ru/support/remont/.

Attention!

The equipment shall be submitted for repair being assembled and clean and along with all

the parts listed in the technical documentation.

Claims are accepted only if a reclamation report describing the problem is applied to the

submitted equipment.

4.2 A product’s failure resulted from consumer’s not observing rules of mounting and operation is not a

reason for claims and warranty repair.

4.3 Claims should be submitted to the following address:

NVP BOLID, #4 Pionerskaya Str., Korolyov, Moscow Region, 141070, Russia

Phone/fax: +7 (495) 775-71-55 (PBX). E-mail: [email protected].

4.4 In case of any issue related to use of the product, please contact the technical support: +7 (495) 775-

71-55 or e-mail: [email protected].

5STORAGE

5.1 In a transport container the equipment can be stored at ambient temperatures -50°Сthrough +50°С

and relative humidity up to 95% at +35°С.

5.2 In the consumer package the equipment shall be stored only in heated premises at temperatures +5°С

through +40°Сand relative humidity up to 80% at +20°С.

6TRANSPORTING

6.1 The modem can be transported in a transport package at ambient temperatures minus 50 through

+50°Сand relative humidity up to 95 % at +35 °С.

7DISPOSAL

7.1 The equipment is to be disposed of considering that there are no toxic components in it.

7.2 The content of precious materials: does not require accountability for storage, retirement and disposal

(Clause 1.2 of GOST 2.608-78).

7.3 The content of non-ferrous metals: does not require accountability for retirement and further disposal.

8MANUFACTURER WARRANTY

8.1 The manufacturer guaranties the product meets with technical requirements stated in the manuals if

the user follows the instructions for transportation, storage, installation, and usage.

8.2 The warranty period is 18 months since putting the product into operation but no more than

24 months from the manufacturer’s date of production.

9CERTIFICATES INFORMATION

For certificates information, please refer to RS-FX-MM / RS-FX-SM40 User’s Manual (the full

version, please see Section 2.3 of this manual).

10 ACCEPTANCE AND PACKAGING CERTIFICATE

Product

Factory Number

Packed By

Date, Month, Year

RS-FX-MM

RS-FX-SM40

is manufactured, accepted in line with mandatory requirements of national standards and applicable

technical documentation, approved as ready for use, and packaged by the Bolid Company.

Altri manuali per RS-FX-MM

Questo manuale è adatto per i seguenti modelli

Altri manuali bolid Modem

bolid

bolid RS-FX-MM Manuale utente

Manuali Modem popolari di altre marche

Davicom

Davicom DM562AP Manuale utente

EpiValley

EpiValley TATA indicom SXC-1080 Manuale utente

Zte

Zte WiMAX Manuale utente

Intelimax

Intelimax MA-2060 Manuale utente

SMC Networks

SMC Networks D3CM1604V Manuale per l'uso e la cura

Telstra

Telstra Wi-Fi 4G Advanced Pro X Manuale utente

Thrane&Thrane

Thrane&Thrane imarsat EXPLORER 300 Manuale utente

Samsung

Samsung AceLink SAM-335A Manuale utente

Enfora

Enfora Enabler-G Guida rapida alla configurazione

iRZ

iRZ ATM2-232 Manuale utente

Zhone

Zhone 6310 Manuale utente

Paradyne

Paradyne Hotwire 7976 Manuale utente

US Robotics

US Robotics 3453C Manuale utente

MaxTech

MaxTech Plug & Play Internal Voice/FAX/Data/SVD... Manuale utente

Zte

Zte MF823 Manuale utente

Four-Faith

Four-Faith F1403 Manuale utente

Sierra Wireless

Sierra Wireless AIRLINK MP595W Manuale utente

Gemtek

Gemtek WiMAX WIXFBR-103 Manuale utente