User Manual
|
Note: When many people pass the gate, only the first person (face has the maximum pixel in the screen) is
captured. According to set frame interval, a face will be captured at certain frames interval and uploaded to FTP
server. Only one face will be displayed in the screen.
【Maximum pixel of face recognition】Setting range: 300-500. When face pixel in the screen is greater than the set
value (maximum pixel of face recognition), face will not be captured.
【Minimum pixel of face temperature measurement】Setting range: 0-500.When face pixel in the screen is greater
than the set value (minimum pixel of face temperature measurement), temperature will not be measured.
【Minimum pixel of face recognition】Setting range: 30-300. When face pixel in the screen is greater than the set
value (minimum pixel of face recognition), face will not be captured.
【Face scenario】This parameter is used to adopt different face exposure strategies for different application
scenarios. There are two types of application scenarios: Ordinary scenario and lobby scenario. Default: 【Lobby
scenario】.
Ordinary scenario: Applicable to conventional environment.
Lobby scenario: Applicable to backlight environment.
【Face tracking box】This is set to display the green face tracking frame displayed on the screen when people is
close or at the correct distance. It is ON by default.
【FTP upload】This parameter is used to set up FTP server to upload human face picture. It is ON by default.
For detailed configuration method, refer to 5.4.7.
