Bolide BN-NVR/32NX Manuale utente
USER MANUAL
1
USER MANUAL
2
USER MANUAL
1
Contents
SAFETY INSTRUCTION...............................................................................................3
CHAPTER 1 OVERVIEW OF NVR..............................................................................1
1.1 REAR PANEL........................................................................................................... 1
1.2 REMOTE CONTROLLER............................................................................................2
CHAPTER 2 NVR CONNECTION...............................................................................3
2.1 HDD INSTALLATION.................................................................................................3
2.2 IP CAMERA AND MONITOR CONNECTION...............................................................3
2.3 POWER SUPPLY CONNECTION...............................................................................3
CHAPTER 3 NVR BOOT UP........................................................................................3
3.1 SYSTEM INITIALIZATION...........................................................................................3
3.2 STARTUP WIZARD....................................................................................................4
3.3 MAIN INTERFACE.....................................................................................................6
CHAPTER 4 NVR MENU.............................................................................................. 7
POPUP MENU.................................................................................................................7
4.2 MAIN MENU...........................................................................................................10
4.2.1 Parameter..................................................................................................... 11
4.2.2 Record Search.............................................................................................25
4.2.3 Device............................................................................................................34
4.2.4 System.......................................................................................................... 36
4.2.5 Advanced...................................................................................................... 42
4.2.6 Shutdown......................................................................................................44
4.3 MENU LOCK.......................................................................................................... 44
4.4 SPLIT MODE..........................................................................................................45
4.5 STREAM SWITCH...................................................................................................45
4.6 VIEW IMAGE QUALITY...........................................................................................45
4.7 STA R T SEQUENCE.................................................................................................45
4.8 MUTE..................................................................................................................... 45
4.9 STA R T CRUISE...................................................................................................... 45
CHAPTER 5 WEB APPLICATION MANAGER...................................................... 47
5.1 ACTIVEXCONTROL DOWNLOAD AND INSTALLATION.............................................47
5.2 WEB APPLICATION MANAGER LOGIN...................................................................48
5.3 LIVE INTERFACE.................................................................................................... 49
5.3.1Menu Bar........................................................................................................49
5.3.2 Playback........................................................................................................51
5.3.3 Parameter Setting........................................................................................54
5.3.4 Local Setting.................................................................................................65
5.3.5 Logout............................................................................................................65
USER MANUAL
2
CHAPTER 6 APPENDIX.............................................................................................66
6.1 TROUBLESHOOTING.............................................................................................. 66
6.2 USAGE MAINTENANCE.......................................................................................... 67
6.3 SYSTEM CONNECTION DIAGRAM..........................................................................68
6.4 ACCESSORIES (GOODS IN KIND PREVAIL)............................................................68
USER MANUAL
3
SAFETY INSTRUCTION
Please carefully read the following safety instruction so as to avoid personal
injuries and prevent the equipment and other connection devices from being
damaged.
1. Power sources (note: please use the power supply attached or specified
by the manufacturer)
Never operate the equipment by unspecified power supply.
2. Never push objects of any kind through openings of NVR;
Never push objects of any kind through openings of NVR so as to avoid electric shock or
other accidents.
3. Do not put the equipment in the dusty field;
Do not put the equipment in the dusty field.
4. Do not place the equipment under rain or humid environment
Do not place the equipment under humid environment like basement. If the equipment is
in contact with water, please unplug the power cable and immediately contact your local
dealer.
5. Keep the surface of the equipment clean and dry
Use soft damp cloth to clean the outer case of NVR (do not use liquid aerosol cleaners)
6. Do not operate if any problems are found
If there are any strange smell or sound, unplug the power cable and contact the
authorized dealer or service center.
7. Do not try to remove the upper cover
Warning: Do not remove the cap of NVR so as to avoid electric shock.
8. Handle with care
If NVR does not work normally because of hitting on the hard object, please contact the
authorized dealer for repair or replacement.
9. Use standard lithium battery(Note: Use the batteries attached or specified by the
manufacturer)
After cutting off the power supply, if the system clock cannot continue to work, please
replace the standard 3V lithium battery on the main board.
Warning: Turn off NVR before replacing the batteries, or you may be suffered from
serious electric shock. Please properly dispose of the used batteries.
10. Put the equipment in a place with good ventilation.
The NVR system includes HDD, which produces large amount of heat during operation.
As a result, do not block the ventilation openings(on the top, bottom, both sides and the
reverse side) for cooling the system during operation. Install or put the equipment in the
place with good ventilation.
11. The attached power adapter can only be used for 1 set of NVR. Do not connect
more equipment, or NVR may be restarted repeatedly because of insufficient
power.
12. Prevent the equipment from water dropping or splashing. Do not place objects
containing water, such as flower vase, on the equipment.
1
Chapter 1 Overview of NVR
1.1 Rear Panel
NVR Rear Panel（For reference only）
Item Physical Port Connection Method
1Powe
r
Port Startup and shutdown
2Powe
r
Switch Connect the attached power supply
3USB Port Connect USB devices, such as USB mouse and USB flash disk.
4Sensor/Alarm Connect to sensor or alarming device
5HDMI Port HDMI high definition port
6VGA Port Connect to VGA monitor, such as PC monitor
7AUDIO OUTPUT Audio signal output, RCA interface
8WAN Port Network input interface of the router/Connect to IP camera.
9LAN Port LAN network interface, support POE, can supply power to the camera.
Tabl e 1-2
2
1.2 Remote Controller
Remote Controller (For reference only)
Table 2-3 Key functions of the remote controller
Item Key title Key function
11-8 Channel select 1-8; Numeric key
29、0Numeric key
3ALL Multiple display mode
4Menu Enter into Main menu/Exit
5Mute Mute On/off
6Submenu Go to submenu
7▲Up arrow key, volume increase
8SEL Select key/Edit key
9◄/Left/Right key; Decrease/increase parameter value of control bar.
10 ▼Down arrow key, Volume decrease
11 Rewind key
12 Forward key
13 Enter into record search menu / Play key
14 ●Record key
15 ■Stop manual record; stop playing
16 Pause/Sequence key
Table 1- 3
1
2
34
56
7
8
9
10
9
11 12
13
14 15
16
3
Chapter 2 NVR Connection
2.1 HDD Installation
Caution: Please do not take out hard drive when NVR is running!
HDD Installation:
(1) Cut power firstly, and then remove screws on both sides and rear panel and open NVR
upper cover.
(2) Connect HDD data cable and power cable to the main board. Install the HDD and fix it
on the bracket and then connect the HDD power cable and data cable.
(3) Put the upper cover back carefully
Note: If user requires higher performance HDD, it is strongly recommended to use hard
drive for security.
2.2 IP Camera and Monitor Connection
Transmit signals of IP camera to NVR by the network cable and connect VGA port
and HDMI port for output (Refer to Chapter 2.2 Rear Panel). Refer to Chapter 7 System
Connection Diagram.
2.3 Power Supply Connection
Please use attached power adapter to connect NVR. Before power on, make sure
network port is well connected.
Chapter 3 NVR Boot up
3.1 System Initialization
After connecting the power cable of NVR to wall outlet and pressing the power button, you
will enter into the NVR system initializing screen.
Note：The illustration in the user
manual may not be the same as the
menu interface in your monitor. All
the illustrations are for users’
reference.
4
3.2 Startup Wizard
After NVR startup is completed, the startup wizard will be displayed. If you do not
want to make any setting, you may click “To disable Startup Wizard after reboot?” to
cancel.
Wizard setting menu includes ：Homepage, Network setup, IPC setup, Record
Schedule and hard disk maintenance..
1．Homepage and network setup. In network setup page, user may set the network of
NVR.
5
2．In this page, user may add and delete IPC. In this page, user may set recording time
and scheduled recording of NVR.
3. It supports HDD formatting and overwriting type.
Questo manuale è adatto per i seguenti modelli
1
Indice
Manuali Hardware di rete popolari di altre marche
Matrix Switch Corporation
Matrix Switch Corporation MSC-HD161DEL Manuale utente
B&B Electronics
B&B Electronics ZXT9-IO-222R2 Manuale utente
Yudor
Yudor YDS-16 Manuale utente
D-Link
D-Link ShareCenter DNS-320L Manuale utente
Samsung
Samsung ES1642dc Istruzioni per l’uso
Honeywell Home
Honeywell Home LTEM-PV Istruzioni per il montaggio
