Step 2: Setting up your Off Vehicle
Coupler Lock
2.1 Select the correct ball size for your
trailer coupler
2.2 Place ball on plate over the nut
2.3 Tighten bolt using a 3/4” wrench
Step 3: Using your Off Vehicle Coupler
Lock
3.1 Place plate with ball attached in your coupler
and latch the coupler
3.2 Place strap over coupler and through
either the forward or rear slots of the plate
(depending on your coupler style)
3.3 Adjust strap height until it is snug with the
coupler, and a set of holes is in line with
the plate
3.4 Place pin through the plate and the strap
3.5 Secure the pin with the BOLT®Lock
3.6 Make sure the BOLT®Lock is fully inserted
4.1 Use your ignition key to unlock when you
need it!
For more information go to:
BOLTLock.com
