Bornack BFD03 Manuale utente

User Manual

0511 EN 355:2002

BFD03

 | 

BFD03

Tape energy absorber

INTENDED USE

The tape energy absorber BFD is part

of personal protective equipment (PPE)

of category III to prevent falls from

heights. The tape energy absorber is

attached to an adequately strong

attachment point, a full body harness

according to EN  and other parts of

the arrester system. It only serves to

reduce the fall impact e.g. when

securing/arresting a person on ladders,

climbing with a guided type fall arrester,

scaolds and roofs.

This equipment may only be used by

persons familiar with personal fall

prevention equipment and the risks

associated with working in areas where

there is a risk of falling.

In combination with PPE according to

EN  ensure that the entire length of

the connection between persons and

the attachment point does not exceed

. m (including the energy absorber,

lanyard and connecting elements).

• Maximum number of users:  person

• Maximum user weight including

clothing and equipment:  kg

• Minimum user weight including

clothing and equipment:  kg

• Application temperature: - °C to

+ °C

All other uses are deemed improper. The

company BORNACK will not be liable for

any ensuing damages. The user bears

the sole risk.

FUNCTION

After a fall, the energy tape absorber

regulates the intensity of the fall impact

and absorbs this to maximum  kN.

Subject to technical changes

BRIEF DESCRIPTION

EQUIPMENT

• Tape energy absorber according to

EN  made of polyester and poly-

amide

• optional: connector according to

EN  or CSA Z. made of

aluminium or steel

ACCESSORIES

• Lanyard according to EN , e.g.

CONNECTA Cowtail

USE

• Arresting

• Reduction of the fall impact after a fall

BRIEF DESCRIPTION

 | 

Connector according to

EN  or CSAZ.

(optional)

Connector according to

EN  or CSAZ.

(optional)

Bag

Red loop, optional with connector

according to EN  or CSAZ. to

attach the connector

Identiﬁcation Zip

Red loop to attach the

connector according to

EN  or CSAZ.

BFD03 REVERSE/IDENTIFICATION

BFD03

Red tape

White tape

Zig-zag course

BFD03 TAPE COURSE INSIDE THE BAG

 | 

Always check every time

before use!

• The personal protective equipment

(PPE) may no longer be used even in

the case of very minor faults, or if there

is any doubt about safe use.

• Faulty PPE components may only be

tested or repaired by BORNACK or in a

workshop authorised in writing by

BORNACK.

• Regular inspections are essential

because the safety of the user depends

on the eciency and durability of the

PPE.

• The user must have completely read

and understood the User Manual

before use.

VISUAL INSPECTION

• Tape energy absorber complete and

ﬂawless.

• Safety seams of the tape energy

absorber are undamaged.

• Connectors (optional) without

damage.

• Product identiﬁcation legible.

• The last inspection by an expert was

carried out within the past  months.

ATTENTION:

The tape energy absorber must be

immediately withdrawn from use after

a fall load. An expert decides about the

re-release according to DGUV Principle

- after an in-depth inspection

based on their technical expertise. Only

use with the written approval of the

expert.

FUNCTION TEST

• Fasteners of the connectors (optional)

and their locks are functional.

INFORMATION BEFORE USE

PREPARATION

A Attach the lanyard (EN ) to one of

the two designated red loops (see

page  top) or to a connector sewn

there (optional) on the energy

absorber.

ATTENTION:

In combination with PPE according to

EN  ensure that the entire length of

the connection between persons and

the attachment point does not exceed

. m (including the energy absorber,

lanyard and connecting elements).

BFD03 IN USE

 | 

ATTACHMENT TO THE FULL BODY

HARNESS

Observe the User Manual of the

full body harness acc. to EN .

B Using a connector (optional part of

the BFD), hook the energy absorber

on the opposite side of the lanyard

into a D-ring marked with A on the full

body harness.

Observe the User Manual of the

connector.

ATTENTION:

Ensure that this connector is attached to

the designated red loop (see page  top)

of the BFD.

C When using the energy absorber with

a lanyard, according to EN , the

energy absorber always needs to be

attached to the full body harness and

not to the attachment point. Other-

wise, the energy absorbing function of

the energy absorber could be compro-

mised.

BFD03 IN USE

ATTACHMENT TO THE ANCHOR POINT

D Attach the lanyard to the anchor

point.

CAUTION: RISK TO LIFE!

Anchor points must be adequately

strong (observe  kN according to

EN  and/or DGUV Regulation

-)!

E Protect the connector against

shearing forces (bending). If necessary,

create an attachment point with a

tape sling (e.g. PROTEC S).

Observe the User Manual of the

connector.

F Only use energy absorber so that it

can assume the fall absorbing func-

tion in case of a fall.

BFD03 IN USE

 | 

G Tape energy absorbers may not be

used in parallel.

H Avoid slack rope. Slack rope extends

the fall path.

I If possible, select an attachment point

vertically above the work point.

CAUTION: RISK TO LIFE!

When selecting the attachment point,

always minimise the fall height and/or

the free fall!

BFD03 IN USE

Indice

Altri manuali Bornack Attrezzatura di sicurezza

Bornack

Bornack STRIPE BASIC Manuale utente

Bornack

Bornack RFZ 1 Manuale utente

Bornack

Bornack FALLSTOP BK Manuale utente

Bornack

Bornack DELTA FS3 Manuale utente

Bornack

Bornack FALLSTOP ROPSTOP 3 Manuale utente

Bornack

Bornack Stripe Comfort Manuale utente

Bornack

Bornack IRS System Manuale utente

Bornack

Bornack MANUSTOP Halteseil Manuale utente

Bornack

Bornack ONE FLEX Manuale utente

Bornack

Bornack SUPERTEC Manuale utente

Bornack

Bornack LORY HOLD LOH01 Manuale utente

Bornack

Bornack ATTACK Manuale utente

Bornack

Bornack TWEEZLE Manuale utente

Bornack

Bornack FS92 Manuale utente

Bornack

Bornack RAILSTOP RS S06 Manuale utente

Bornack

Bornack Fallstop FS 4 T Manuale utente

Bornack

Bornack IRS QLOCK Manuale utente

Bornack

Bornack PRUSIK Manuale utente

Bornack

Bornack TQR02 Manuale utente

Bornack

Bornack LORY CLIMB Manuale utente

Bornack

Bornack BOOT Manuale utente

Bornack

Bornack EVO SAFETY Manuale utente

Bornack

Bornack LORY STOP Manuale utente

Bornack

Bornack BFD ROPE03 Manuale utente

Manuali Attrezzatura di sicurezza popolari di altre marche

Innova

Innova Xtirpa Manuale di istruzioni

bolle SAFETY

bolle SAFETY B810 Manuale utente

SHENZHEN FANHAI SANJIANG ELECTRONICS

SHENZHEN FANHAI SANJIANG ELECTRONICS A9060T Manuale utente

Hiltron security

Hiltron security POWER8E Guida

Hatco

Hatco B-950P Manuale utente

Sitec

Sitec TX MATIC Manuale utente

TEUFELBERGER

TEUFELBERGER GRIP 12 Manuale utente

MSA

MSA PremAire System Manuale utente

AMC

AMC 1022M Series Manuale utente

Trinity

Trinity CASS S3 Manuale utente

CMC

CMC Helitack HotSeat Manuale utente

Force

Force P-35 Manuale utente

ACM

ACM SAFETY D200 Manuale del prodotto

Honeywell

Honeywell Miller H-Design DuraFlex Manuale dell'operatore

ROCK

ROCK P-451 AS Manuale utente

Power first

Power first 2XYR7A Manuale di servizio

SCHUBERTH

SCHUBERTH SHP 28-C Manuale utente

Trango

Trango CINCH Manuale utente