6en | Safety PoE midspans for PTZ cameras
2020-11 | 1.0 | Bosch Security Systems
1.4 Important Safety Instructions
Important safety information
– The unit should be connected to PoE networks only,
without routing to the outside plant.
– Only qualified personnel can install or remove the unit.
– Follow basic electricity safety measures whenever
connecting the unit to its power source.
– A voltage mismatch can cause equipment damage and may
pose a fire hazard. If the voltage indicated on the label is
different from the power outlet voltage, do not connect the
unit to this power outlet.
– Read the installation instructions before connecting the
unit to its power source.
EMC compliance
– FCC Part 15 class B and EN 55022 class B
– EN55024
– VCCI
Safety compliance
– UL/cUL per 60950-1
– GS mark
– Installation and removal of the midspan must be carried out
by qualified personnel only.
– Follow basic electricity safety measures whenever
connecting the midspan to its power source.
– A voltage mismatch can cause equipment damage and may
pose a fire hazard. If the voltage indicated on the label is
different from the power outlet voltage, do not connect the
midspan to this power outlet.
– The PoE injector "Data In" and "Data & Power Out" ports
are shielded RJ45 data sockets. They cannot be used as
Plain Old Telephone Service (POTS) telephone sockets.
Only RJ45 data connectors can be connected to these
sockets.
