Bosch GLM 30 Istruzioni per il montaggio
IMPORTANT: IMPORTANT: IMPORTANTE:
Read Before Using Lire avant usage Leer antes de usar
Operating/Safety Instructions
Consignes d’utilisation/de sécurité
Instrucciones de funcionamiento y
seguridad
1-877-BOSCH99 (1-877-267-2499) www.boschtools.com
Call Toll Free for
Consumer Information
& Service Locations
Pour obtenir des informations
et les adresses de nos centers
de service après-vente,
appelez ce numéro gratuit
Llame gratis para
obtener información
para el consumidor y
ubicaciones de servicio
For English Version Version française Versión en español
See page 4 Voir page 20 Ver la página 38
GLM 30
GLM 35
-2-
10
9
8
7
5
43
1
12 11
6
h
ab
e
g
e
e
f
c
d
2
-3-
1
A
13
-4-
1.5 ft
1 ft
1.
2. 3.
B
2
1
X
C
-5-
General Safety Rules
!
WARNING
Read all instructions. Failure to follow all
instructions listed below may result in
hazardous radiation exposure, electric shock, fire and/or
serious injury.
The term “tool” in the warnings listed below
refers to your mains-operated (corded) tool or battery-operated
(cordless) tool.
SAVE ALL WARNINGS AND INSTRUCTIONS
FOR FUTURE REFERENCE
The following label is on your laser
tool for your safety. ALWAYS BE
AWARE of its location when using
the tool.
DO NOT direct the
laser beam at persons
or animals and do not
stare into the laser beam yourself. This tool
produces class 2 laser radiation and complies
with 21 CFR 1040.10 and 1040.11 except for deviations
pursuant to Laser Notice No. 50, dated June 24, 2007. This
can lead to persons being blinded.
Safety Rules
Working safely with the
measuring tool is possible
only when the operating
and safety information
are read completely and
the instructions contained
therin are strictly followed.
Never make warning labels
on the Measuring tool
unrecognizable.
Never aim the beam at a
workpiece with a reflective
surface. Bright shiny
reflective sheet steel or
similar reflective surfaces are
not recommended for laser
use.
Reflective surfaces could
direct the beam back towards the
operator.
Take care to recognize the
accuracy and range of the
device.
Measurement may not
be accurate if used beyond the
rated range of the device.
Use of controls or
adjustments or performance
of procedures other than
those specified herein may
-6-
result in hazardous radiation
exposure.
The use of optical
instruments with this product
will increase eye hazards.
Have the measuring tool
repaired only through
qualified specialist using
original spare parts.
This
ensures that the safety of the
measuring tool is maintained.
Do not allow children to use
the measuring tool without
supervision.
They could
unintentionally blind other
persons.
Do not point the laser beam
at persons or animals and do
not look into the laser beam
yourself, not even from a
large distance.
Do not use the laser viewing
glasses as safety goggles.
The laser viewing glasses are
used for improved visualization of
the laser beam, but they do not
protect against laser radiation.
Do not use the laser viewing
glasses as sun glasses or
in traffic.
The laser viewing
glasses do not afford complete
UV protection and reduce color
perception.
Be sure to read and
understand all instructions
in this manual before using
this product.
Failure to follow
all instructions may result in
hazardous radiation exposure,
electric shock, fire, and/or bodily
injury.
Use of controls or
adjustments or performance
of procedures other
than those specified in
this manual, may result
in hazardous radiation
exposure.
The use of optical
instruments with this product
will increase eye hazard.
ALWAYS: Make sure that any
bystanders in the vicinity of
use are made aware of the
dangers of looking directly
into the measuring tool.
DO NOT remove or deface
any warning or caution
labels. Removing labels
increases the risk of
exposure to laser radiation.
DO NOT stare directly at the
laser beam or project the
laser beam directly into the
eyes of others.
Serious eye
injury could result.
DO NOT place the measuring
tool in a position that may
cause anyone to stare into
the laser beam intentionally
or unintentionally.
Serious eye
injury could result.
DO NOT use any optical tools
Safe Operating Procedures
-7-
such as, but not limited to,
telescopes or transits to view
the laser beam.
Serious eye
injury could result.
ALWAYS remove the
batteries when cleaning the
laser light aperture to laser
lens.
DO NOT operate the
measuring tool around
children or allow children to
operate the measuring tool.
Serious eye injury could result.
ALWAYS turn the measuring
tool “OFF” when not in use.
Leaving the measuring tool “ON”
increases the risk of someone
inadvertently staring into the
laser beam.
DO NOT operate the
measuring tool in
combustible areas such as
in the presence of flammable
liquids, gases or dust.
ALWAYS position the
measuring tool securely.
Damage to the measuring tool
and/or serious injury to the user
could result if the measuring tool
falls.
ALWAYS use only the
accessories that are
recommended by the
manufacturer of your
measuring tool.
Use of
accessories that have been
designed for use with other
measuring tools could result in
serious injury.
DO NOT leave measuring
tool “on” unattended in any
operation mode.
Repair and servicing must
always be performed by
a qualified repair facility.
Repairs performed by unqualified
personnel could result in serious
injury.
DO NOT use this measuring
tool for any purpose other
than those outlined in this
manual.
This could result in
serious injury.
DO NOT disassemble the
measuring tool. There are no
user serviceable parts inside.
Disassembling the laser will
void all warranties on the
product. Do not modify the
product in any way.
Modifying
the measuring tool may result
in hazardous laser radiation
exposure.
Electrical safety
Batteries can explode or leak,
cause injury or fire. To reduce
this risk, always follow all
instructions and warnings on
the battery label and package.
DO NOT short any battery
terminals.
DO NOT charge alkaline
batteries.
DO NOT mix old and new
batteries. Replace all of them
at the same time with new
batteries of the same brand
and type.
-8-
The measuring tool is intended for measuring distances, lengths,
heights and clearances. The measuring tool is suitable for
measuring indoors.
Warning Symbol
Alerts user to warning
messages
Read Manual Symbol
Alerts user to read
manual
Intended Use
Symbols
Features
1
Display
2
Measuring button
3
Minus button
4
Function button
5
Clear/ On/Off button
6
Plus button
7
Battery lid
8
Latch of battery lid
9
Serial number
10
Laser warning label
11
Reception lens
12
Laser beam outlet
13
ID Tag*
*Optional accessory
Display Elements
a Temperature warning
bLow battery indicator
cMeasuring functions
Real time measurement
Length measurement
Area/Surface measurement
Volume measurement
Indirect measurement
dLaser activation indicator
eUnit of measure
fCurrent measuring value
gPrevious measuring value(s)
hError message “Error”
The numbering of the product features shown refers to the
illustration of the measuring tool on the graphic page.
DO NOT mix battery
chemistries.
Dispose of or recycle batteries
per local code.
DO NOT dispose of batteries
in fire.
Keep batteries out of reach of
children.
Remove batteries if the device
will not be used for several
months.
-9-
Technical Data
Digital Laser Measure GLM 30 R / GLM 30 S / GLM 30
Article Number
GLM 30
GLM 35
3601K72B10
3601K72B12
Measuring range (typical)
GLM 30
GLM 35
6 in - 100 ft (0.15 - 30 m)A
6 in - 120 ft (0.15 - 35 m)A
Measuring accuracy (typical) ± 1/16 in (± 1.5 mm)B
Lowest indication unit ± 1/32 in (1 mm)
Operating temperature +14 °F to 113 °F (-10 °C to 45 °C)
Storage temperature -4 °F to 158 °F (-20 °C to 70 °C)
Relative air humidity, max 90%
Laser class 2
Laser type 635nm, <1mW
Automatic switch-off after approx.
- Laser 20 s
- Measuring Tool 5 min
Degree of Protection IP54 (dust and splash water protected)C
Batteries 2 x 1.5V (AAA)
Battery service life in measuring
operation, approx 4 h
Weight 0.22 lb (0.1 kg)
Dimensions 4.1 x 1.6 x 0.9 in
(105 x 41 x 24 mm)
-10-
A) The working range increases depending on how well the laser light is
reflected from the surface of the target (scattered, not reflective) and with
increased brightness of the laser point to the ambient light intensity (interior
spaces, twilight). In unfavorable conditions, e.g., with extreme illumination
or a badly reflecting surface, the measuring range may be limited.
B) In favorable conditions, a deviation influence of ±0.05 mm/m must
be taken into account. In unfavorable conditions, e.g., with extreme
illumination, badly reflecting surface or the room temperature deviating
heavily from 77 °F (25 °C), the maximum deviation can be up to ±3.0mm.
Additionally, a deviation influence of 0.15mm/m must be taken into account
C) Battery compartment not included.
The measuring tool can be clearly identified with the serial number 9on
the type plate.
Preparation
Inserting/Replacing the Batteries
AAA Alkaline batteries are recommended for the measuring tool.
To open the battery lid
7
, press the latch
8
and remove the
battery lid. Insert the batteries. When inserting, pay attention to
the correct polarity according to the representation on the inside
of the battery compartment.
When the battery symbol appears for the first time on the
display, there is approximately 15 minutes of useage remaining
while in real time measurement mode. When the battery symbol
flashes, the batteries must be replaced; measurements are no
longer possible.
Always replace all batteries at the same time. Only use
batteries from one brand and with identical capacity.
Remove the batteries from the tool when not using it for
extended periods.
When storing for extended periods, the
batteries can corrode and discharge themselves.
Altri manuali per GLM 30
2
Questo manuale è adatto per i seguenti modelli
1
Indice
Lingue:
