Bosch EX12LED Manuale utente
Precision Engineered Opto-Electronics™
EX12LED
Infrared LED Illuminator
INSTALLATION INSTRUCTIONS
MAN-12LED-
0
6
IMPORTANT SAFETY INSTRUCTIONS
1. Read these instructions.
2. Keep this instruction.
3. Heed all warnings.
4. Follow these instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
7. Install in accordance with manufacturer
instructions.
8. Do not install near any heat sources over
manufacture specification temperature.
9. Only use attachments/accessories specified by
the manufacturer.
10. Refer all servicing to qualified service
personnel. Servicing is required when the
apparatus has been damaged in a way, such
as the apparatus has been exposed to rain or
moisture, does not operate normally, or has
been dropped.
For best results, please read this Instruction Booklet prior
to installing the EX12LED Illuminator Unit.
WARNING!
CSA Certified / UL Listed CLASS 2 power adaptors must
be used in order to comply with electrical safety standards.
This installation should be made by a qualified service
person and conform to all local codes.
EXTREME CCTV™ will not be responsible for injuries or
damages resulting from the improper installation or use of
any product sold by EXTREME CCTV™, their agents,
distributors or dealers.
EU Directives covered by this declaration:
72/9/EC Low Voltage Directives
89/336/EEC Electromagnetic Compatibility Directive
Le bloc d'alimentation basse tension doit être conforme à
la norme CSA / UL. L'alimentation doit être fournie par une
unité SELV-LPS ou SELV - classe 2
Avertissement!
NOTE: This equipment has been tested and found to
comply with the limits for a digital device, pursuant to
part 15 of the FCC rules. These limits are designed to
provide reasonable protection against harmful
interference in a residential installation. As part of its’
normal operation this device can generate radio
frequency energy and if not installed and used in
accordance with the installation manual may cause
interference to radio communications. However, there
is no guarantee that interference will not occur on a
particular installation. If the device does cause
interference to radio or television reception the user is
encouraged to try to correct the interference by one or
more of the following measures:
1) Fit Ferrite beads on all cable to and from the power
supply box, within the box walls.
2) Route the composite cable between the camera and
the power supply in steel conduit piping over the entire
run of the cable up to and including connection to a
deep conduit base fitted under the camera and a conduit
fitting adaptor in the wall of the PSU box.
3) Contact BOSCH Service Center for further advice.
INDEX – EX12LED
Page
Description..................................................1
Unpacking...................................................2
Parts List.....................................................2
Items Required for Installation....................2
Initial Preparations......................................3
Guidelines...................................................3
Section 1. Mechanical Specifications..........4
Section 2. Input Power Connections...........7
Section 3. Mounting – Illuminator Unit ........8
Section 4. LED Adjustments.....................11
Section 5. Illuminator Re-Assembly..........13
Section 6. Troubleshooting Guide.............15
Section 7.General Specifications .............16
1
DESCRIPTION
The EX12LED Infrared LED Illuminator
provides night-time covert lighting for short
range indoor and outdoor surveillance when
used in conjunction with existing or newly
installed monochrome cameras. Its compact
cube shape is comprised of 42 LEDs mounted
into a solid core CNC machined aluminum
housing and beamed through a dark-tinted
tough window.
The EX12LED has an effective range up to
40 feet and is available in 850nm or 940nm
with 30º or 60º beam spread.
A voltage regulator circuit allows for 12-24ac/dc
a range operation; also providing protection from
voltage surge, transient spikes, and reverse
voltage.
The EX12LED is available in several models
designed to meet specific needs.
See the Light. Get the Picture.™
2
UNPACKING
Care should be taken when unpacking the shipped
unit. Check the parts list and confirm all items have
been located. Inspect the equipment thoroughly to
ensure nothing was damaged in transit.
Contact BOSCH Service Center if a problem is
noted, see the rear page of this booklet for contact
numbers.
PARTS LIST (items supplied with unit)
- EX12LED Unit including one “U” shaped
mounting bracket with fasteners
- Installation Instructions booklet
ITEMS REQUIRED FOR INSTALLATION
(Not supplied with unit)
- Philips screwdriver
- Small slotted screwdriver
- Mounting screws, etc.
3
INITIAL PREPARATIONS
The EX12LED operates in either Vdc or
Vac mode. The power input supply voltages
can be 12-24VAC/DC
See Section 2, Input Power Connections –
Reference Only.
Determine the optimum location for the
Illuminator unit.
See Section 3, Mounting-Illuminator Unit.
All units have been tested prior to shipment,
but it is advisable to check the unit’s
operation before installation.
GUIDELINES
The installation and set-up of the EX12LED is
explained in Sections 3 and 4.
It is important that these steps are followed in
sequence:
4
1. MECHANICAL SPECIFICATIONS
(See Section 7 - General Specifications, for
additional information)
FIGURE 1 – 1
Outline Dimensions
5
FIGURE 1 – 2
Front View
Indice
Altri manuali Bosch Proiettore
