Bosch VideoJet X10 Manuale utente

VideoJet X10

Network Video Server

en Installation and Operating Manual

VideoJet X10 Table of Contents | en 3

Bosch Security Systems Installation and Operating Manual V3.0 | 2007.09

Table of Contents

1Preface 7

1.1 About this Manual 7

1.2 Conventions in this Manual 7

1.3 Intended Use 7

1.4 EU Directives 8

1.5 Rating Plate 8

2 Safety Information 9

2.1 Electric Shock Hazard 9

2.2 Installation and Operation 9

2.3 Maintenance and Repair 9

3 Product Description 11

3.1 Scope of Delivery 11

3.2 System Requirements 12

3.3 Overview of Functions 13

3.4 Connections on the Front Panel 16

3.5 Connections on the Rear Panel 17

4 Installation 19

4.1 Preparations 19

4.2 Mounting 19

4.3 Connections 20

4.4 Power On/Power Off 25

4.5 Setup Using the Configuration Manager 25

5 Configuration Using a Web Browser 27

5.1 Connecting 27

5.2 Configuration Menu 29

5.3 Identification 31

5.4 Camera Name 31

5.5 Display Stamping 32

5.6 Password 34

5.7 Language 35

5.8 Date/Time 35

5.9 Time Server 35

5.10 Picture Settings 37

5.11 Encoder Profile 38

5.12 Profile Configuration 40

5.13 Video Input 43

5.14 Audio 44

5.15 JPEG Posting 45

5.16 Storage Medium 47

5.17 iSCSI 48

5.18 Partitioning 51

4en | Table of Contents VideoJet X10

V3.0 | 2007.09 Installation and Operating Manual Bosch Security Systems

5.19 Recording Profiles 57

5.20 Recording Scheduler 59

5.21 Alarm Sources 61

5.22 Alarm Connections 62

5.23 VCA 65

5.24 Alarm E-Mail 70

5.25 Alarm Task Editor 72

5.26 Relay Settings 73

5.27 COM1 75

5.28 Network 77

5.29 Multicasting 81

5.30 Encryption 83

5.31 Version Information 85

5.32 Livepage Configuration 86

5.33 System State 89

5.34 Licenses 90

5.35 Maintenance 91

5.36 Function Test 93

6Operation 95

6.1 Operation with Microsoft Internet Explorer 95

6.2 The LIVEPAGE 97

6.3 Saving Snapshots 100

6.4 Recording Video Sequences 100

6.5 Running Recording Program 100

6.6 The RECORDINGS Page 101

6.7 Backup 104

6.8 Installing the Player 105

6.9 Hardware Connections Between Video Servers 106

6.10 Operation Using Software Decoders 108

7 Maintenance and Upgrades 109

7.1 Testing the Network Connection 109

7.2 Unit Reset 109

7.3 Repairs 110

7.4 Transfer and Disposal 110

8 Appendix 111

8.1 Troubleshooting 111

8.2 General Malfunctions 112

8.3 Malfunctions with iSCSI Connections 114

8.4 LEDs 115

8.5 Processor Load 116

8.6 Serial Interface 116

8.7 Terminal Block 117

8.8 Communication with Terminal Program 118

9Glossary 121

VideoJet X10 Table of Contents | en 5

Bosch Security Systems Installation and Operating Manual V3.0 | 2007.09

10 Specifications 125

10.1 Unit 125

10.2 Protocols/Standards 126

11 Index 127

6en | Table of Contents VideoJet X10

V3.0 | 2007.09 Installation and Operating Manual Bosch Security Systems

VideoJet X10 Preface | en 7

Bosch Security Systems Installation and Operating Manual V3.0 | 2007.09

1Preface

1.1 About this Manual

This manual is intended for persons responsible for the installation and operation of the

VideoJet X10. International, national and any regional electrical engineering regulations must

be followed at all times. Relevant knowledge of network technology is required. The manual

describes the installation and operation of the unit.

1.2 Conventions in this Manual

In this manual, the following symbols and notations are used to draw attention to special

situations:

1.3 Intended Use

The VideoJet X10 network video server transfers video, audio and control signals over data

networks (Ethernet LAN, Internet). There are various memory options for recording the

images captured by the connected camera. The unit is intended for use with CCTV systems.

Various functions can be triggered automatically by incorporating external alarm sensors.

Other applications are not permitted.

In the event of questions concerning the use of the unit which are not answered in this

manual, please contact your sales partner or:

Bosch Sicherheitssyteme GmbH

Robert-Koch-Straße 100

85521 Ottobrunn

Germany

www.bosch-sicherheitssysteme.de

CAUTION!

This symbol indicates that failure to follow the safety instructions described may endanger

persons and cause damage to the unit or other equipment.

It is associated with immediate, direct hazards.

NOTICE!

This symbol refers to features and indicates tips and information for easier, more convenient

use of the unit.

8en | Preface VideoJet X10

V3.0 | 2007.09 Installation and Operating Manual Bosch Security Systems

1.4 EU Directives

The VideoJet X10 network video server complies with the requirements of EU Directives 89/

336 (Electromagnetic Compatibility) and 73/23, amended by 93/68 (Low Voltage Directive).

1.5 Rating Plate

For exact identification, the model name and serial number are inscribed on the bottom of the

housing. Please make a note of this information before installation if necessary so as to have it

to hand in case of questions or when ordering spare parts.

VideoJet X10 Safety Information | en 9

Bosch Security Systems Installation and Operating Manual V3.0 | 2007.09

2SafetyInformation

2.1 Electric Shock Hazard

– Never attempt to connect the unit to any power network other than the type for which it

is intended.

– Use only power supply units with UL approval and a power output according to LPS or

NEC Class 2.

– Never open the housing.

– Never open the housing of the power supply unit.

– If a fault occurs, disconnect the power supply unit from the power supply and from all

other units.

– Install the power supply and the unit only in a dry, weather-protected location.

– If safe operation of the unit cannot be ensured, remove it from service and secure it to

prevent unauthorized operation. In such cases, have the unit checked by Bosch Security

Systems.

Safe operation is no longer possible in the following cases:

– if there is visible damage to the unit or power cables,

– if the unit no longer operates correctly,

– if the unit has been exposed to rain or moisture,

– if foreign bodies have penetrated the unit,

– after long storage under adverse conditions, or

– after exposure to extreme stress in transit.

2.2 Installation and Operation

– The relevant electrical engineering regulations and guidelines must be complied with at

all times during installation.

– Relevant knowledge of network technology is required to install the unit.

– Before installing or operating the unit, make sure you have read and understood the

documentation for the other equipment connected to it, such as cameras. The

documentation contains important safety instructions and information about permitted

uses.

– Perform only the installation and operation steps described in this manual. Any other

actions may lead to personal injury, damage to property or damage to the equipment.

2.3 Maintenance and Repair

– Never open the housing of the VideoJet X10. The unit does not contain any user-

serviceable parts.

– Never open the housing of the power supply unit. The power supply unit does not contain

any user-serviceable parts.

– Ensure that all maintenance or repair work is carried out only by qualified personnel

(electrical engineers or network technology specialists).

10 en | Safety Information VideoJet X10

V3.0 | 2007.09 Installation and Operating Manual Bosch Security Systems

Indice

Altri manuali Bosch Hardware di rete

Bosch

Bosch VIP X1600 Module Manuale utente

Bosch

Bosch DIVAR IP 6000 (2U) Manuale utente

Bosch

Bosch VIP-X1XF-E Manuale utente

Bosch

Bosch VideoJet X40 SN Manuale utente

Bosch

Bosch VIPX1A Manuale utente

Bosch

Bosch VIP X2 Manuale utente

Bosch

Bosch VIP X1600 XF Manuale utente

Bosch

Bosch D9210B Guida rapida

Bosch

Bosch VIP X1600 Module Manuale utente

Bosch

Bosch VideoJet 8008 Manuale utente

Bosch

Bosch VIP-X1XF Manuale utente

Bosch

Bosch VIP X1600 M4S Manuale utente

Bosch

Bosch DX4020-EXP Manuale utente

Bosch

Bosch VIP X1600 Module Manuale utente

Bosch

Bosch VIP X1 Manuale utente

Bosch

Bosch VideoJet X20 SN Manuale utente

Bosch

Bosch VIP X1 Manuale utente

Bosch

Bosch VideoJet X SN Manuale utente

Bosch

Bosch PHANTOM EDGE Manuale utente

Bosch

Bosch VideoJet X10/X20/X40 Manuale utente

Bosch

Bosch Rexroth IndraControl XFE01.1-SY-01 Manuale utente

Bosch

Bosch DIVAR IP 3000 DIP-3040-00N Manuale utente

Bosch

Bosch DIVAR IP 6000 1U Manuale utente

Bosch

Bosch wLSN Manuale utente

Manuali Hardware di rete popolari di altre marche

Matrix Switch Corporation

Matrix Switch Corporation MSC-HD161DEL Manuale utente

B&B Electronics

B&B Electronics ZXT9-IO-222R2 Manuale utente

Yudor

Yudor YDS-16 Manuale utente

D-Link

D-Link ShareCenter DNS-320L Manuale utente

Samsung

Samsung ES1642dc Istruzioni per l’uso

Honeywell Home

Honeywell Home LTEM-PV Istruzioni per il montaggio

evertz

evertz 7700 Series Manuale utente

D-Link

D-Link ShareCenter DNS-343 Manuale utente

Asante

Asante AsanteBridge 1012 Manuale utente

FireBrick

FireBrick FB2700 Manuale utente

Audiovox Electronics

Audiovox Electronics ARWH2T Manuale utente

ADC

ADC DSX-1 Manuale

NetComm

NetComm NF2 Manuale utente

Alcatel-Lucent

Alcatel-Lucent 5620 Manuale utente

Dell EMC

Dell EMC XC6420 Series Manuale utente

Lanner

Lanner NCA-1020A Manuale utente

Allied Telesis

Allied Telesis AT-TN121-A Manuale utente

Arista

Arista CCA-ETM-Q12 Manuale utente